Related Products
Engine Water Pump - ACDelco (251-725)
251-725
- Sale Price: $150.11
- Sale Price: $150.11
Review Fitment & Product Details
Details
- Brand:
- SKU:
251-725
- Other Names:
19417097
- Description: An ACDelco GM Original Equipment Engine Water Pump circulates coolant through your vehicle's radiator and engine system to help maintain proper engine temperature and performance. This original equipment water pump has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Cadillac;Chevrolet;Chevrolet;GMC;GMC;Oldsmobile;Pontiac - Condition: New
- Notes: Part Number - Old: 19201601
Pallet Layer Maximum: 2
Maximum Cases per Pallet Layer: 20
Warranty Special: 24 Months/Unlimited Miles Limited Warranty for Parts (plus Labor if installed by a GM dealer)|36 Months/60,000 Kilometers Limited Warranty (Parts & Labour)
Harmonized Tariff Code (HTS): 8413309090
Life Cycle Status Code: 4
Life Cycle Status Description: Announced
Country of Origin (Primary): CN
Warranty Special UOM: TX
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Pricing is valid online only and may vary in your local store
Vehicle Fitment
Vehicle Fitment
Key Product Information
Additional Information
| Brand | GM Genuine Parts |
| FAQ - Answer 1 | Yes. Always consult the Vehicle Owner's manual or an expert technician before making any repairs or adjustments |
| FAQ - Answer 2 | Yes. ACDelco GM Original Equipment parts are equivalent to your GM vehicle's original factory components. |
| FAQ - Answer 3 | No. Water pumps can vary greatly in size and appearance depending on the vehicle they are designed for. |
| FAQ - Answer 4 | Yes. The water pump is responsible for moving coolant through your vehicle's cooling system, keeping the heat generated by your engine at acceptable levels, and helping prevent overheating. A malfunctioning water pump can cause your engine to overheat, which may result in severe and costly engine damage. |
| FAQ - Answer 5 | Yes. As part of regular cooling system operation, the water pump sends hot coolant to the heater core of your engine, which transfers heat into the passenger cabin of your vehicle. If this hot coolant is unable to reach the heater core, then this heat transfer cannot occur, and your passenger compartment remains colder than you want. |
| FAQ - Answer 6 | No. Your vehicle's water pump keeps coolant moving as long as the engine is running and stops when the engine is turned off. If you want to be able to circulate coolant for a short time after the engine has been turned off, an auxiliary electric water pump is needed. |
| FAQ - Question 1 | Should the Vehicle Owner's manual or an expert technician be consulted before making any repairs or adjustments? |
| FAQ - Question 2 | Will ACDelco GM Original Equipment Water Pumps, Kits and other components match the quality of my GM vehicle's original factory parts? |
| FAQ - Question 3 | Do all water pumps look the same? |
| FAQ - Question 4 | Can a malfunctioning water pump harm my engine? |
| FAQ - Question 5 | Does the water pump affect the temperature inside the passenger compartment of my vehicle? |
| FAQ - Question 6 | Does the water pump work when my vehicle is turned off? |
| Fan Clutch Included | No |
| Features & Benefits - Bullet 1 | Thoroughly tested for reliable, leak-resistant performance |
| Features & Benefits - Bullet 2 | Uniform wall sections and smooth coolant-flow cavities for efficient operation |
| Features & Benefits - Bullet 3 | Coated seals with a stainless steel spring for durability |
| Features & Benefits - Bullet 4 | GM-recommended replacement part for your GM vehicle's original factory component |
| Features & Benefits - Bullet 5 | Offering the quality, reliability, and durability of GM OE |
| Features & Benefits - Bullet 6 | Manufactured to GM OE specification for fit, form, and function |
| Good Maintenance Practices - Section 1 - Header | Before purchasing and installing an engine water pump, make sure it is the correct fit for your vehicle. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Clean all excess dirt and debris from the water pump housing. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Run your vehicle to increase engine temperature, and ensure the system is pressurized. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspect for leakage at the water pump outlet housing or the rear cover gasket, and leakage at the water pump vent or weep hole. |
| Good Maintenance Practices - Section 2 - Bullet 4 | A stain around the weep hole is acceptable. However, if a weep occurs with the engine running and the coolant system pressurized, then the water pump should be replaced. |
| Good Maintenance Practices - Section 2 - Header | Tips for Water Pump Inspection: |
| Good Maintenance Practices - Section 3 - Bullet 1 | Clean and reinstall the coolant recovery reservoir before flushing the cooling system. |
| Good Maintenance Practices - Section 3 - Bullet 10 | Inspect related components in the cooling system, including your fan blades, fan clutch, engine mounts, radiator, belts and hoses, and reservoir. |
| Good Maintenance Practices - Section 3 - Bullet 2 | Flush the cooling system completely, using power flush equipment or thermal cycling the system with clean water three times. The most effective method of system flushing is to use a coolant exchanger, following the manufacturer's operating instructions. |
| Good Maintenance Practices - Section 3 - Bullet 3 | Do not use any non-approved flush agents and replace the coolant according to manufacturer's specifications. |
| Good Maintenance Practices - Section 3 - Bullet 4 | Clean all sealing surfaces, and make sure all old gasket material is removed before installing your replacement component. |
| Good Maintenance Practices - Section 3 - Bullet 5 | Never strike the water pump shaft, since this will damage the new water pump. |
| Good Maintenance Practices - Section 3 - Bullet 6 | Torque all bolts according to the manufacturer's specifications and adjust belts to proper tension (if applicable) to manufacturer's specifications. |
| Good Maintenance Practices - Section 3 - Bullet 7 | Use sealant tabs only if recommended. Some sealant tabs or similar compounds may restrict coolant flow through the passages of some cooling systems. |
| Good Maintenance Practices - Section 3 - Bullet 8 | With the new pump installed, turn the hub by hand and check for rotation. |
| Good Maintenance Practices - Section 3 - Bullet 9 | After installation, pressure-test the system for leaks and check for sufficient fan blade clearance between the blade and radiator shroud. |
| Good Maintenance Practices - Section 3 - Header | Tips for Water Pump Servicing & Installation: |
| Height (in) | 8.3 |
| Housing Material | Cast Iron |
| Hub Height | 6.89 |
| Hub Hole Quantity | 4 |
| Impeller Material | Steel |
| Impeller Rotation | Standard |
| Includes Back Housing | Yes |
| Installation Warnings | No |
| Length (in) | 13.3 |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 4 |
| Outlet Quantity | 1 |
| Pulley Included | No |
| Related Cooling Fan Components | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Leaking Coolant - Puddles of coolant under your vehicle, a constant drip or stream of coolant from the water pump's weep hole, or a constantly empty or low coolant reservoir are all signs of potential water pump wear, and may be caused by cracks in the pump, or seal or gasket failures. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Engine Overheating - If your vehicle's engine overheats, it may not be receiving the required coolant flow. Make sure that your vehicle's cooling system contains the proper level of coolant. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Rumbling Noise in the Pump - A rumbling, squeaking, or screeching noise near the front of your vehicle when you start it may indicate a malfunctioning water pump bearing. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Visible Component Wear - Worn seals, corrosion, cavitation/pitting of pump components, or a loose or wobbly pump shaft are all signs of wear that may lead to water pump failure and should be addressed. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Signs of wear for heater water pumps include but are not limited to: |
| Thermostat And Housing Included | No |
| UPC | 00808709895121 |
| Water Pump Drive Type | Serpentine Belt |
| Weight (lb) | 13.9 |
| Width (in) | 8.3 |
Features and Benefits
Interchange
Policies
Policies
Product Reviews
Product Reviews
Brand
Store
AutoNationParts.com
Discover Quality Auto Parts at AutoNation Parts Online – Delivered in 2 Days
At AutoNationParts.com, we offer a vast selection of OEM and aftermarket auto parts with fast, reliable 2-day shipping. Whether you're in Clearwater, FL, Chicago, IL, Atlanta, GA, Houston, TX, or Charlotte, NC, your parts are delivered quickly and efficiently.
Our OEM parts are crafted to meet the exact specifications of your vehicle. Benefits include:
- Perfect fit for your make and model
- Reliable performance and durability
- Preservation of your vehicle’s warranty
Choose OEM parts for peace of mind and the same quality your vehicle had when it left the factory.
Aftermarket Auto Parts: Affordable & Reliable
For those seeking cost-effective solutions, aftermarket parts provide:
- Competitive pricing without sacrificing quality
- Wide selection from trusted third-party manufacturers
- Ideal for replacements, upgrades, or performance enhancements
Fast Shipping from Top Fulfillment Cities
We ship from strategically located distribution centers to ensure your auto parts arrive in 2 days or less. Key fulfillment cities include:
- Clearwater, FL – Major parts hub for the Southeast
- Chicago, IL – Central hub serving the Midwest
- Atlanta, GA – Fast delivery across the Southeast
- Houston, TX – Serving Texas and surrounding states
- Charlotte, NC – Quick shipping to the Carolinas
- Dallas, TX – Serving North Texas and Oklahoma
- Los Angeles, CA – Quick delivery across Southern California
- New York, NY – Serving the Tri-State area
- Miami, FL – Fast delivery across Florida
- Phoenix, AZ – Serving Arizona and Nevada
- San Francisco, CA – Quick delivery across Northern California
- Seattle, WA – Serving Washington and Oregon
- Denver, CO – Serving Colorado and surrounding states
- Las Vegas, NV – Serving Nevada and California
- Orlando, FL – Serving Central Florida
Wherever you are in the U.S., our network ensures reliable delivery right to your door.
Why Choose AutoNation Parts Online?
- Extensive inventory of OEM and aftermarket parts
- Fast, 2-day shipping from key U.S. cities
- Trusted quality and service from a publicly traded company
- Convenient online shopping for auto parts, delivered right to your door.
Shop now and get your auto parts delivered in 2 days – Clearwater, Chicago, Atlanta, Houston, Charlotte, and beyond!