Engine for 1997 Audi A6
No.
Part # / Description / Price
Price
N/A
Engine Oil Cooler 
Audi
Audi Description: A6/S6. 2.8L v6, 1998-01. 2.8L v6, 1996-97. A4, S4. 1.8L, to vin# 8ny028000. Cabriolet. Listed under Audi part number 078-117-021-A, this Engine Oil Cooler keeps oil clean, cool, and at the pressure the engine needs, which is what protects bearings, tensioners, and variable valve timing hardware under sustained load. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $420.82
$319.40
MSRP $420.82
$319.40
N/A
Short Block Audi
Audi Notes: Includes: Crankshaft, Pistons, Oil Pump & Oil Pan.
Description: Cabriolet. A4, S4. 2.8l. A6/S6. 2.8l.
N/A
Engine Mount Audi
Audi Description:
A part that locates and supports the engine. It also reduces vibrations from the engine.
A part that locates and supports the engine. It also reduces vibrations from the engine.
N/A
Engine Crankshaft Seal Audi
Audi Description: All models. A6/S6. A8. V8 Quattro. 3.6l, 4.2l. 90. Cabriolet. To 07/1999. To 09/99. From 11/2000. The original equipment Audi Engine Crankshaft Seal supplied under part number 054-115-147-B creates the sealing interface between two components, and because ...
MSRP $35.78
$24.42
MSRP $35.78
$24.42
1
Engine Cylinder Head Audi
Audi Description: A6/S6. A4. 90. Cabriolet. Left. Genuine Audi Engine Cylinder Head 078-103-351-B. This original equipment component operates inside the engine's rotating and sealing envelope, where clearances measured in hundredths of a millimeter decide oil control, compression sealing, and long term durability. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
8
Engine Valve Stem Oil Seal Audi
Audi Description: A6/S6. From 07/1994. 7mm. A4. Cabriolet. From 09/94. 7mm. The original equipment Audi Engine Valve Stem Oil Seal supplied under part number 027-109-675 creates the sealing interface between two components, and because a seal is the cheapest part in most a ...
MSRP $22.58
$15.41
MSRP $22.58
$15.41
10
Engine Valve Spring Retainer Audi
Audi Description: A6/S6. Upper & lower. A4. Cabriolet. 90. Listed under Audi part number 078-109-641-C, this Engine Valve Spring Retainer is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $20.18
$13.77
MSRP $20.18
$13.77
11
Engine Valve Spring Retainer Keeper Audi
Audi Description: A6/S6. A4. Cabriolet. S8. Audi part number 021-109-651, the factory Engine Valve Spring Retainer Keeper, operates inside the engine's rotating and sealing envelope, where clearances measured in hundredths of a millimeter decide oil control, compression sealing, and long term durability. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $8.43
$5.73
MSRP $8.43
$5.73
14
Seal Audi
Audi Description: This genuine Audi Seal, part number 068-103-085-E, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $32.98
$22.51
MSRP $32.98
$22.51
17
Engine Piston Ring Audi
Audi Notes: Includes: Rings For One Piston.
Description: A4, S4. 2.8l. A6/S6. 2.8l. Cabriolet. 90.
A single piston ring or set of piston rings for a single engine piston / cylinder head for a vehicle.
A single piston ring or set of piston rings for a single engine piston / cylinder head for a vehicle.