Bumper for 2000 Audi TT
No.
Part # / Description / Price
Price
1
Bumper Cover 
Audi
Audi Description: Audi part number 8N0-807-511-A-GRU, the factory Bumper Cover, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $1,348.33
$1,051.70
MSRP $1,348.33
$1,051.70
3
Bumper Cover Bolt Audi
Audi Positions: Left
Description: Upper. 4.2L. Listed under Audi part number N-103-407-03, this Bumper Cover Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.08
$2.09
MSRP $3.08
$2.09
4
Quarter Panel Splash Shield Screw Audi
Audi Positions: Left
Description: Genuine Audi Quarter Panel Splash Shield Screw N-907-750-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
5
Air Inlet Duct U-Nut Audi
Audi Positions: Left
Description: The original equipment Audi Air Inlet Duct U-Nut supplied under part number N-015-437-4 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
8
Valance Panel Audi
Audi Description: 1.8L with 180 hp. This factory Audi Valance Panel (8N0-807-421-GRU) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $173.33
$132.60
MSRP $173.33
$132.60
9
Valance Panel Clip Audi
Audi Positions: Left
Description: This genuine Audi Valance Panel Clip, part number N-038-550-1, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.74
$1.86
MSRP $2.74
$1.86
13
Rear Body Panel Rivet Audi
Audi Description: Listed under Audi part number N-909-135-02, this Rear Body Panel Rivet is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $11.98
$8.13
MSRP $11.98
$8.13
14
Ft Fender Liner U-Nut Audi
Audi Description: Genuine Audi Ft Fender Liner U-Nut N-104-337-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.08
$2.09
MSRP $3.08
$2.09
16
Bumper Guide Audi
Audi Positions: Right
Description: Outer. This factory Audi Bumper Guide (8N0-807-454) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $30.00
$20.48
MSRP $30.00
$20.48
17
Fender Liner Nut Audi
Audi Positions: Left
Description: The original equipment Audi Fender Liner Nut supplied under part number N-908-214-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.24
$2.20
MSRP $3.24
$2.20
18
Bumper Cover Bracket Audi
Audi Positions: Right
Description: Audi part number 8N0-807-484-A, the factory Bumper Cover Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $58.00
$38.83
MSRP $58.00
$38.83
22
Spoiler Gasket Audi
Audi Positions: Left
Description: Sedan. Station wagon. Listed under Audi part number AKL-448-030-05, this Spoiler Gasket creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $116.65
$88.54
MSRP $116.65
$88.54