Trunk for 2002 Audi A6

3

4B5971821B01C - Body: Guide for Audi Image

Shock Absorber Bellows

Audi

Description: From 2/98. This factory Audi Shock Absorber Bellows (4B5-971-821-B-01C) creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.

MSRP $12.81

$10.44

MSRP $12.81

$10.44

4

Deck Lid Stop Buffer

8D5-827-499

Audi

Description: Wagon. Hinge,bumper. Upper. Convertible. Audi part number 8D5-827-499, the factory Deck Lid Stop Buffer, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.

MSRP $4.00

$2.72

MSRP $4.00

$2.72

5

Trunk Lid Lift Support ²

4B5-827-552-G

Audi

Positions: Left

Description: A6/S6. Without spoiler. A4. Without S4. Exc.Rear Spoiler. This genuine Audi Trunk Lid Lift Support, part number 4B5-827-552-G, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.

MSRP $73.33

$58.92

MSRP $73.33

$58.92

13

Lift-Gate Latch Control Rod Clip

893-837-821-A

Audi

Description: Outer. Upper. This factory Audi Lift-Gate Latch Control Rod Clip (893-837-821-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.

MSRP $5.13

$3.48

MSRP $5.13

$3.48

14

Deck Lid Lock Cylinder Clip

893-827-547

Audi

Description: Inner. This genuine Audi Deck Lid Lock Cylinder Clip, part number 893-827-547, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.

MSRP $5.00

$3.40

MSRP $5.00

$3.40

22

Deck Lid Drain Plug

8A0-831-449

Audi

Positions: Left

Description: Lower. Upper. Outer. This factory Audi Deck Lid Drain Plug (8A0-831-449) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.

MSRP $2.64

$1.80

MSRP $2.64

$1.80

23

Deck Lid Drain Plug

8D5-827-713-A

Audi

Positions: Left

Description: Lower. Center. This factory Audi Deck Lid Drain Plug (8D5-827-713-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.

View Details

25

Deck Lid Release Lever

8E0-880-703

Audi

Description: The original equipment Audi Deck Lid Release Lever supplied under part number 8E0-880-703 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.

View Details

26

Cap

8E0-880-704

Audi

Description: This genuine Audi Cap, part number 8E0-880-704, encloses and protects the component behind it, keeping debris, moisture, and heat away from hardware that was not designed to be exposed while also finishing the visible surface. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.

MSRP $8.27

$6.75

MSRP $8.27

$6.75

29

Bulb

N-017-725-2

Audi

Description: Genuine Audi Bulb N-017-725-2. This original equipment component provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.

MSRP $3.47

$3.07

MSRP $3.47

$3.07

Air Conditioning & Heat

Air Intake & Fuel Delivery

Brakes & Brake Parts

Charging & Starting Systems

Cooling Systems

Engine & Components

Exhaust

Exterior

Filters

Interior

Lighting & Lamps

Suspension & Steering

Transmission & Drivetrain

Wheels, Tire & Parts

Aftermarket

Vehicle

Here for All Your Automotive Needs

Accessories

Shop Parts & Accessories

Shop Aftermarket

Shop Clearance

My Garage

Categories

Trunk for 2002 Audi A6