Hardware, Fasteners & Fittings for 2004 Chevrolet Avalanche 2500
Related Parts
Part # / Description / Price
Price
Engine Cylinder Head Bolt 
GM
GM Description: 10 x 1.5 x 103mm.
Bolt for Cylinder Head.
Bolt for Cylinder Head.
MSRP $10.62
$7.80
MSRP $10.62
$7.80
Cylinder Head Bolt GM
GM Description: 10 x 1.5 x 86mm. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Bolt for Cylinder Head.
Bolt for Cylinder Head.
MSRP $7.50
$5.51
MSRP $7.50
$5.51
M10x1.5x52 Engine Cylinder Head Bolt GM
GM Description: 10 x 1.5 x 52mm. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Bolt for Cylinder Head.
Bolt for Cylinder Head.
Front Oil Galley Plug GM
GM Description: Location-Front of Engine Block Oil Hole. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Plug that prevents the engine block or cylinder head from cracking in case of freezing coolant. Also used to plug the casting holes from production.
Plug that prevents the engine block or cylinder head from cracking in case of freezing coolant. Also used to plug the casting holes from production.
MSRP $10.06
$7.40
MSRP $10.06
$7.40
Multi-Purpose Threaded Plug GM
GM Description: Location-Rear of Engine Block Oil Hole. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Plug that prevents the engine block or cylinder head from cracking in case of freezing coolant. Also used to plug the casting holes from production.
Plug that prevents the engine block or cylinder head from cracking in case of freezing coolant. Also used to plug the casting holes from production.
MSRP $9.96
$7.33
MSRP $9.96
$7.33
M12x1.75x89 Crankshaft Bearing Cap Bolt GM
GM Description: 12 x 1.75 x 89mm. Fastens vehicle's components together
This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
Engine Crankshaft Main Bearing Cap Bolt.
Engine Crankshaft Main Bearing Cap Bolt.
Engine Connecting Rod Bolt GM
GM Description: This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Engine Connecting Rod Bolt.
Engine Connecting Rod Bolt.
MSRP $18.17
$13.36
MSRP $18.17
$13.36
MSRP $22.90
$16.83
Crankshaft Bearing Cap Stud GM
GM Description: This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Engine Crankshaft Main Bearing Cap Stud.
Engine Crankshaft Main Bearing Cap Stud.
Engine Valve Spring GM
GM Description: This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Engine Valve Spring.
Engine Valve Spring.
MSRP $8.49
$6.24
MSRP $8.49
$6.24
Connecting Rod Nut GM
GM Description: This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Engine Connecting Rod Nut.
Engine Connecting Rod Nut.
MSRP $7.25
$5.33
MSRP $7.25
$5.33
Multi-Purpose Threaded Plug GM
GM Description: This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Plug that prevents the engine block or cylinder head from cracking in case of freezing coolant. Also used to plug the casting holes from production.
Plug that prevents the engine block or cylinder head from cracking in case of freezing coolant. Also used to plug the casting holes from production.
MSRP $8.87
$6.53
MSRP $8.87
$6.53
Automatic Transmission Fluid Pressure Test Hole Plug GM
GM Description: Location-Engine Block. 1/8"-27. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Plug that prevents the engine block or cylinder head from cracking in case of freezing coolant. Also used to plug the casting holes from production.
Plug that prevents the engine block or cylinder head from cracking in case of freezing coolant. Also used to plug the casting holes from production.
MSRP $8.28
$6.09
MSRP $8.28
$6.09
