Bumper & Components - Front for 2007 Audi A4
No.
Part # / Description / Price
Price
1
Bumper Cover 
Audi
Audi Description: A4 & S4 w/o Air Intake. A4/S4.
Fits A4, S4
A4 & S4 w/o Air Intake, w/headlamp washer, w/headlamp washer. A4/S4, w/headlamp washers, w/"S-Line". A4/S4, w/ headlamp washers, w/ s-Line. A4 & S4 w/o Air Intake. w/ headlamp washer A4, w/ S Line Pkg. A4 ...
MSRP $1,328.33
$1,036.10
MSRP $1,328.33
$1,036.10
1
Bumper Cover Audi
Audi Description: A4 & S4 w/o Air Intake. A4/S4.
Fits A4, S4
A4 & S4 w/o Air Intake, w/o headlamp washer, A4, w/S Line Pkg. A4/S4, w/o headlamp washers, w/"S-Line". A4/S4, w/o headlamp washers, w/ s-Line. A4 & S4 w/o Air Intake. w/o headlamp washer A4, w/ S Line Pk ...
MSRP $1,363.32
$1,063.40
MSRP $1,363.32
$1,063.40
1
Bumper Cover Audi
Audi Description: A4 & S4 without AIR INTAKE. without headlamp washer A4, without S Line pkg. A4/S4. without headlamp washers without "S-Line". The original equipment Audi Bumper Cover supplied under part number 8E0-807-105-N-GRU forms part of the vehicle's visible exterio ...
MSRP $1,096.67
$855.40
MSRP $1,096.67
$855.40
1
Bumper Cover Audi
Audi Positions: Front
Description: A4/S4, with headlamp washers, without s-line. Listed under Audi part number 8E0-807-105-D-GRU, this Bumper Cover forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $1,250.00
$975.00
MSRP $1,250.00
$975.00
2
Radiator Support Panel Bolt Audi
Audi Positions: Left
Description: This factory Audi Radiator Support Panel Bolt (N-906-833-02) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
3
Bumper Cover Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with bumper cover.
Description: A4/S4. RS4. Listed under Audi part number 8E0-807-277, this Bumper Cover Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $32.78
$22.37
MSRP $32.78
$22.37
3
Bumper Cover Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with bumper cover.
Description: A4/S4. S4 with air intake. RS4. Listed under Audi part number 8E0-807-278, this Bumper Cover Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $32.78
$22.37
MSRP $32.78
$22.37
4
Bumper Cover Bolt Audi
Audi Positions: Left
Description: S4 with air intake. A4/S4. Bumper cover,bolt. RS4. Wagon, with S4. Sedan, with S4. This factory Audi Bumper Cover Bolt (8E0-807-893) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $18.45
$12.55
MSRP $18.45
$12.55
5
Bumper Cover Retainer Audi
Audi Description: A4/S4. RS4. This factory Audi Bumper Cover Retainer (8E0-805-121-B) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $24.38
$16.64
MSRP $24.38
$16.64
6
Tow Hook Cover Audi
Audi Notes: PARTS: Part included with bumper cover.
Description: A4/S4. This genuine Audi Tow Hook Cover, part number 8E0-807-241-C-GRU, is a genuine Audi accessory engineered to the vehicle's mounting points and load limits, so it fits without drilling and carries a defined capacity rating. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $57.91
$46.53
MSRP $57.91
$46.53
7
Headlight Washer Cover Audi
Audi Positions: Left
Description: A4 & S4 without air intake. A4/S4. h'lamp washer. RS4, h'lamp washer. The original equipment Audi Headlight Washer Cover supplied under part number 8E0-955-275-E-GRU provides illumination or signaling, and because lens clarity, beam pattern, and moisture ...
MSRP $78.65
$61.35
MSRP $78.65
$61.35
7
Headlight Washer Cover Audi
Audi Positions: Right
Description: A4 & S4 without air intake. A4/S4. h'lamp washer. RS4, h'lamp washer. Genuine Audi Headlight Washer Cover 8E0-955-276-E-GRU. This original equipment component provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing ...
MSRP $78.65
$61.35
MSRP $78.65
$61.35
8
Headlight Washer Cover Bracket Audi
Audi Positions: Left
Description: A4/S4. RS4. This genuine Audi Headlight Washer Cover Bracket, part number 8E0-807-787-B, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $15.22
$10.35
MSRP $15.22
$10.35
8
Headlight Washer Cover Bracket Audi
Audi Positions: Right
Description: A4/S4. RS4. The original equipment Audi Headlight Washer Cover Bracket supplied under part number 8E0-807-788-B is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $15.22
$10.35
MSRP $15.22
$10.35
9
Fog Light Trim Audi
Audi Positions: Left
Description: A4/S4. This genuine Audi Fog Light Trim, part number 8E0-807-173-01C, provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $103.32
$78.42
MSRP $103.32
$78.42
9
Fog Light Trim Audi
Audi Positions: Right
Description: A4/S4. This genuine Audi Fog Light Trim, part number 8E0-807-174-01C, provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $99.82
$75.76
MSRP $99.82
$75.76
10
Fog Light Trim Audi
Audi Positions: Left
Description: A4/S4. Audi part number 8E0-807-489-01C, the factory Fog Light Trim, provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $103.32
$78.42
MSRP $103.32
$78.42
10
Fog Light Trim Audi
Audi Positions: Right
Description: A4/S4. Genuine Audi Fog Light Trim 8E0-807-490-01C. This original equipment component provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $98.32
$74.62
MSRP $98.32
$74.62
11
Bumper Cover Spacer Panel Audi
Audi Positions: Left
Description: A4 & S4 without air intake, all. A4/S4, 3.2l. This genuine Audi Bumper Cover Spacer Panel, part number 8E0-807-151-A-01C, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $39.50
$26.96
MSRP $39.50
$26.96
11
Bumper Cover Spacer Panel Audi
Audi Positions: Right
Description: A4 & S4 without air intake, all. A4/S4, 3.2l. Audi part number 8E0-807-152-A-01C, the factory Bumper Cover Spacer Panel, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $39.50
$26.96
MSRP $39.50
$26.96
12
Bumper Impact Bar Audi
Audi Description: A4/S4. Listed under Audi part number 8E0-807-109-M, this Bumper Impact Bar forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $673.33
$511.06
MSRP $673.33
$511.06
13
Impact Bar Bolt Audi
Audi Positions: Left
Description: A4/S4. S4 with air intake. RS4. This factory Audi Impact Bar Bolt (N-911-058-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $7.00
$4.76
MSRP $7.00
$4.76
14
Bumper Cover Support Rail Audi
Audi Positions: Left
Description: A4/S4. RS4. Audi part number 8E0-807-381-C, the factory Bumper Cover Support Rail, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $38.58
$26.33
MSRP $38.58
$26.33
15
Bumper Cover Support Rail Rivet Audi
Audi Positions: Left
Description: Audi part number N-910-939-01, the factory Bumper Cover Support Rail Rivet, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.38
$2.30
MSRP $3.38
$2.30
16
Bumper Impact Absorber Audi
Audi Positions: Left
Description: A4/S4. RS4. The original equipment Audi Bumper Impact Absorber supplied under part number 8E0-807-271-A forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $474.98
$360.51
MSRP $474.98
$360.51
16
Bumper Impact Absorber Audi
Audi Positions: Right
Description: A4/S4. RS4. This genuine Audi Bumper Impact Absorber, part number 8E0-807-272-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $474.98
$360.51
MSRP $474.98
$360.51
17
Bumper Impact Absorber Bolt Audi
Audi Positions: Left
Description: A4 & S4 without air intake. RS4. Genuine Audi Bumper Impact Absorber Bolt N-907-558-02. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and c ...
MSRP $8.71
$5.93
MSRP $8.71
$5.93
18
Bumper Cover Support Rail Audi
Audi Positions: Left
Description: A4/S4. RS4. Audi part number 8E0-807-203-B, the factory Bumper Cover Support Rail, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $56.50
$37.83
MSRP $56.50
$37.83
18
Bumper Cover Support Rail Audi
Audi Positions: Right
Description: A4/S4. RS4. This genuine Audi Bumper Cover Support Rail, part number 8E0-807-204-B, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $57.98
$38.82
MSRP $57.98
$38.82
19
Bumper Cover Support Rail Bolt Audi
Audi Positions: Left
Description: A4 & S4 without air intake. RS4. This factory Audi Bumper Cover Support Rail Bolt (N-103-126-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.82
$1.92
MSRP $2.82
$1.92
19
Bumper Cover Support Rail Bolt Audi
Audi Description: A4 & S4 without air intake. Wagon. RS4. Listed under Audi part number N-105-686-02, this Bumper Cover Support Rail Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $8.71
$5.93
MSRP $8.71
$5.93
20
Bumper Guide Audi
Audi Positions: Left
Description: A4/S4. RS4. This genuine Audi Bumper Guide, part number 8E0-807-283-E, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $51.98
$34.80
MSRP $51.98
$34.80
20
Bumper Guide Audi
Audi Positions: Right
Description: A4/S4. RS4. This factory Audi Bumper Guide (8E0-807-284-E) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $51.98
$34.80
MSRP $51.98
$34.80
21
Fender Liner Screw Audi
Audi Positions: Left
Description: Audi part number N-910-570-01, the factory Fender Liner Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.59
$2.43
MSRP $3.59
$2.43