Trunk for 2008 Audi S8
No.
Part # / Description / Price
Price
1
Deck Lid 
Audi
Audi Description: With spoiler. This genuine Audi Deck Lid, part number 4E0-827-023-D, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
4
Deck Lid Stop Buffer Audi
Audi Positions: Right
Description: Adjustable. Audi part number 8H0-827-249-A, the factory Deck Lid Stop Buffer, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $19.73
$13.42
MSRP $19.73
$13.42
5
Deck Lid Hinge Audi
Audi Positions: Left
Description: Genuine Audi Deck Lid Hinge 4E0-827-299-H. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $140.42
$106.58
MSRP $140.42
$106.58
6
Deck Lid Stop Buffer Audi
Audi Positions: Left
Description: Audi part number 8H0-827-371, the factory Deck Lid Stop Buffer, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
7
Adjust Bolt Cap Audi
Audi Positions: Right
Description: This genuine Audi Adjust Bolt Cap, part number 4E0-827-261, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.00
$1.36
MSRP $2.00
$1.36
8
Trunk Lid Lift Support 2 Audi
Audi Positions: Right
Notes: PARTS: Order by description.
Description: A8, S8. With power trunk lid. Right. To vin 4e8008000. From vin 4e8008001. The original equipment Audi Trunk Lid Lift Support supplied under part number 4E0-827-552-C forms part of the vehicle's visible exterior surface, so panel gap, contour, and mountin ...
MSRP $120.66
$91.57
MSRP $120.66
$91.57
8
Trunk Lid Lift Support 2 Audi
Audi Positions: Left
Notes: PARTS: Order by description.
Description: A8, S8. With power trunk lid. Left. To vin 4e8008000. From vin 4e8008001. This genuine Audi Trunk Lid Lift Support, part number 4E0-827-551-C, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $120.66
$91.57
MSRP $120.66
$91.57
9
Headrest Guide Audi
Audi Positions: Left
Description: From vin 4e6012501. To vin 4e6012500. Audi part number 4E0-971-445-B, the factory Headrest Guide, forms part of the factory seat assembly, where foam density, cover tension, and mounting geometry all work together to hold the occupant in the position Audi engineered for comfort and restraint performance. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $24.82
$20.32
MSRP $24.82
$20.32
9
Headrest Guide Audi
Audi Positions: Right
Description: From vin 4e6012501. This factory Audi Headrest Guide (4E0-971-446-C) forms part of the factory seat assembly, where foam density, cover tension, and mounting geometry all work together to hold the occupant in the position Audi engineered for comfort and restraint performance. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $29.15
$23.87
MSRP $29.15
$23.87
10
Retainer Audi
Audi Positions: Right
Description: The original equipment Audi Retainer supplied under part number 4E0-827-168-D is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $151.65
$115.10
MSRP $151.65
$115.10
11
Engine Crankshaft Sealing Flange Gasket Audi
Audi Positions: Right
Description: This factory Audi Engine Crankshaft Sealing Flange Gasket (4E0-827-966) creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
12
Deck Lid Seal Audi
Audi Description: Genuine Audi Deck Lid Seal 4E0-827-705-E. This original equipment component creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $358.81
$274.49
MSRP $358.81
$274.49
13
Trunk Lock Actuator Motor Audi
Audi Description: This genuine Audi Trunk Lock Actuator Motor, part number 4F5-827-505-D, conditions and distributes cabin air, where refrigerant charge, airflow path integrity, and actuator calibration together determine whether the system reaches its target temperature. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
Not For Sale
Not For Sale
14
Deck Lid Latch Cover Audi
Audi Description: Lock cover. Convertible. Coupe. The original equipment Audi Deck Lid Latch Cover supplied under part number 4E0-827-520-B-01C manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $12.81
$8.72
MSRP $12.81
$8.72
15
Deck Lid Release Cable Audi
Audi Description: The original equipment Audi Deck Lid Release Cable supplied under part number 4E0-827-531-A carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
16
Deck Lid Trim Audi
Audi Description: Coupe. Convertible. This genuine Audi Deck Lid Trim, part number 4E0-827-645-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $15.70
$10.68
MSRP $15.70
$10.68
18
Deck Lid Lock Audi
Audi Description: Without key. A6. A8, S8. S4, RS4. Cabriolet A4, S4. This genuine Audi Deck Lid Lock, part number 107-827-573-BD, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $429.15
$325.72
MSRP $429.15
$325.72
20
Trunk Lid Pull Down Motor Audi
Audi Description: The original equipment Audi Trunk Lid Pull Down Motor supplied under part number 4E0-827-852-G forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
20
Trunk Lid Pull Down Motor Audi
Audi Description: From vin 4e8008001. A8, S8. This genuine Audi Trunk Lid Pull Down Motor, part number 4E0-827-852-H, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
22
Trunk Open Warning Switch Audi
Audi Description: A4. Avant. A8, S8. The original equipment Audi Trunk Open Warning Switch supplied under part number 8E0-953-229 presents vehicle information to the driver or accepts driver input, so its display, backlighting, and switch contacts are the interface between the operator and the vehicle's electronics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $35.96
$24.54
MSRP $35.96
$24.54
23
Deck Lid Release Lever Audi
Audi Description: The original equipment Audi Deck Lid Release Lever supplied under part number 8E0-827-566 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $155.81
$118.26
MSRP $155.81
$118.26
23
Switch Audi
Audi Positions: Rear
Description: A6, S6. Q7. A8, S8. Switches & controls, rear release. A7, S7, RS7. Lift gate. Controls & components. 2013-2016, to 08/2012. This genuine Audi Switch, part number 3D0-959-831-D-20H, presents vehicle information to the driver or accepts driver input, so it ...
24
Deck Lid Release Lever Audi
Audi Description: Listed under Audi part number 4E0-880-701, this Deck Lid Release Lever forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
25
Deck Lid Handle Audi
Audi Description: Listed under Audi part number 8E0-880-703-A, this Deck Lid Handle manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $15.72
$10.69
MSRP $15.72
$10.69
26
Folding Seat Latch Release Handle Bezel Audi
Audi Description: Audi part number 8E0-880-704-A, the factory Folding Seat Latch Release Handle Bezel, forms part of the factory seat assembly, where foam density, cover tension, and mounting geometry all work together to hold the occupant in the position Audi engineered for comfort and restraint performance. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $14.17
$9.64
MSRP $14.17
$9.64
2 This part contains hazardous materials. Extra shipping costs apply.