Control Modules for 2008 Audi TT Quattro
No.
Part # / Description / Price
Price
1
Direct Ignition Coil 
Audi
Audi Description: 3.6L. TT. 3.2l.
An induction coil, placed on each sparkplug of a vehicle and used with and ECU and a Camshaft or Crankshaft position sensor for timing, to transform a vehicles battery voltage to a much higher voltage needed to create proper spark in the spark plug.
An induction coil, placed on each sparkplug of a vehicle and used with and ECU and a Camshaft or Crankshaft position sensor for timing, to transform a vehicles battery voltage to a much higher voltage needed to create proper spark in the spark plug.
1
Direct Ignition Coil Audi
Audi Description: TT. 1.8l. 3.2l. A3. 3.2l. Q7. 3.6l.
An induction coil, placed on each sparkplug of a vehicle and used with and ECU and a Camshaft or Crankshaft position sensor for timing, to transform a vehicles battery voltage to a much higher voltage needed to create proper spark in the spark plug.
An induction coil, placed on each sparkplug of a vehicle and used with and ECU and a Camshaft or Crankshaft position sensor for timing, to transform a vehicles battery voltage to a much higher voltage needed to create proper spark in the spark plug.
2
Multi-Purpose Wiring Harness Connector Audi
Audi Description: 3.2L. This factory Audi Multi-Purpose Wiring Harness Connector (1J0-973-724) carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $42.66
$34.27
MSRP $42.66
$34.27
3
Spark Plug Audi
Audi Description: 3.2L. Genuine Audi Spark Plug 101-905-606-A. This original equipment component initiates combustion at a precisely controlled moment, and because ignition energy demand rises with boost, marginal components fail under load long before they fail at idle. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $21.79
$17.85
MSRP $21.79
$17.85
4
Sender Audi
Audi Description: Q7. 3.6l. A3. 3.2l. 6.3L. TT. 3.2l. This genuine Audi Sender, part number 030-907-601-F, is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $106.64
$80.95
MSRP $106.64
$80.95
5
Headlight Motor Connector Audi
Audi Description: V6 with XENON. adjust motor. V8 with XENON. adjust motor. Without xenon lamps. adjust motor. 3.2L. Audi part number 1J0-973-723, the factory Headlight Motor Connector, carries power and signal between components, and since most electrical faults trace to ...
MSRP $19.64
$16.09
MSRP $19.64
$16.09
6
Engine Camshaft Position Sensor Bolt Audi
Audi Description: 3.2L. The original equipment Audi Engine Camshaft Position Sensor Bolt supplied under part number N-911-322-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $2.78
$1.89
MSRP $2.78
$1.89
9
Cv Joint Splash Shield Bolt Audi
Audi Description: This genuine Audi Cv Joint Splash Shield Bolt, part number N-910-799-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.76
$0.52
MSRP $0.76
$0.52
12
Cover Bolt Audi
Audi Description: 4.2L, m6x12. 2.0L, m6x12. 3.2L, m6x12. Genuine Audi Cover Bolt N-909-803-04. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.36
$2.96
MSRP $4.36
$2.96
13
Ignition Knock (Detonation) Sensor Audi
Audi Description: A7 Quattro.
Ignition Knock (Detonation) Sensor.
Ignition Knock (Detonation) Sensor.
13
Ignition Knock (Detonation) Sensor Audi
Audi Description: TT. 3.2l. A3. 3.2l. 3.2L, with harness. Audi part number 022-905-377, the factory Ignition Knock (Detonation) Sensor, initiates combustion at a precisely controlled moment, and because ignition energy demand rises with boost, marginal components fail under load long before they fail at idle. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $143.32
$103.19
MSRP $143.32
$103.19
14
Ignition Knock (Detonation) Sensor Bolt Audi
Audi Description: 3.2L. Genuine Audi Ignition Knock (Detonation) Sensor Bolt N-010-272-5. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.52
$0.35
MSRP $0.52
$0.35
15
Engine Crankshaft Position Sensor Audi
Audi Description: TT. 3.2l.
A electronic device used in an internal combustion engine to monitor the position or rotational speed of the crankshaft while this information is used by engine management systems to control the fuel injection or the ignition system timing and other engine parameters.
A electronic device used in an internal combustion engine to monitor the position or rotational speed of the crankshaft while this information is used by engine management systems to control the fuel injection or the ignition system timing and other engine parameters.
16
Turbocharger Mount Heat Shield Bolt Audi
Audi Description: The original equipment Audi Turbocharger Mount Heat Shield Bolt supplied under part number N-106-192-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $0.70
$0.48
MSRP $0.70
$0.48
17
Engine Crankshaft Position Sensor O-Ring Audi
Audi Description: 2.0L. 3.2L. Gas, 2016-18. 3.0L gas 2015-18. 4.2L, A4/S4.