Engine & Trans Mounting for 2009 Audi S6
No.
Part # / Description / Price
Price
1
Engine Mount 
Audi
Audi Positions: Right
Description: S6. Right. 5.2L, from vin 4f8128001. 5.2L, to vin 4f8128000. This factory Audi Engine Mount (4F0-199-382-BP) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $770.83
$554.99
MSRP $770.83
$554.99
2
Engine Mount Audi
Audi Positions: Left
Description: S6. Left. 5.2L, from vin 4f8128001. 5.2L, to vin 4f8128000. Listed under Audi part number 4F0-199-379-BM, this Engine Mount controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $761.99
$548.63
MSRP $761.99
$548.63
3
Engine Mount Bracket Audi
Audi Positions: Right
Description: 5.2L. Genuine Audi Engine Mount Bracket 4F0-199-352-J. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $414.32
$316.95
MSRP $414.32
$316.95
4
Engine Mount Bracket Audi
Audi Positions: Left
Description: 5.2L. Audi part number 4F0-199-351-Q, the factory Engine Mount Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $337.49
$258.17
MSRP $337.49
$258.17
5
Engine Mount Support Bracket Audi
Audi Positions: Right
Description: 5.2L. Audi part number 4F0-199-308-AE, the factory Engine Mount Support Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $209.98
$160.64
MSRP $209.98
$160.64
6
Engine Mount Support Bracket Audi
Audi Positions: Left
Description: 5.2L. Genuine Audi Engine Mount Support Bracket 4F0-199-307-AD. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $209.98
$160.64
MSRP $209.98
$160.64
7
Engine Mount Crossmember Audi
Audi Description: 5.2L. This genuine Audi Engine Mount Crossmember, part number 4F0-199-403-E, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $606.66
$460.45
MSRP $606.66
$460.45
8
Transmission Crossmember Audi
Audi Description: 5.2L. The original equipment Audi Transmission Crossmember supplied under part number 4F0-399-403-A manages torque delivery between the engine and the driveline, where hydraulic pressure control, clutch pack condition, and fluid quality determine both shift feel and service life. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $67.15
$53.95
MSRP $67.15
$53.95
9
Cross-Member Mount Bolt Audi
Audi Description: 3.2L. 3.0L. 4.2L. 5.2L. Listed under Audi part number N-910-666-01, this Cross-Member Mount Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.00
$1.36
MSRP $2.00
$1.36
10
Transmission Crossmember Audi
Audi Description: 5.2L. Genuine Audi Transmission Crossmember 4F0-399-263-AB. This original equipment component manages torque delivery between the engine and the driveline, where hydraulic pressure control, clutch pack condition, and fluid quality determine both shift feel and service life. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $749.98
$569.24
MSRP $749.98
$569.24
11
Trans Mount Audi
Audi Description: A6. 3.0L, trans code kku. 4.2L, trans code kku. 5.2L. The original equipment Audi Trans Mount supplied under part number 4F0-399-151-AP is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, ...
12
Automatic Transmission Mount Bracket Audi
Audi Description: 5.2L. The original equipment Audi Automatic Transmission Mount Bracket supplied under part number 4F0-399-115-BJ is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $214.98
$164.46
MSRP $214.98
$164.46