Ignition System for 2010 Chevrolet Silverado 1500
No.
Part # / Description / Price
Price
1
Engine Control Module 
GM
GM Notes: PARTS: Part numbers are for remanufactured assemblies, Contact local dealer for possible core charge and exchange information.
Description: 4.3L. This part requires programming and/or special setup procedures GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle's vital systems, which is critica ...
MSRP $434.02
$269.09
MSRP $434.02
$269.09
2
Engine Control Module Bracket GM
GM Description: 6.0L. 4.8, 5.3, 6.0 & 6.2L. 4.3L. 2008-09. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
A bracket for a engine control module.
A bracket for a engine control module.
MSRP $8.70
$5.61
MSRP $8.70
$5.61
3
Engine Camshaft Position Sensor GM
GM Description: Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
Engine Camshaft Position Sensor.
Engine Camshaft Position Sensor.
MSRP $101.54
$62.19
MSRP $101.54
$62.19
4
Engine Crankshaft Position Sensor GM
GM Description: 4.3L. This part requires programming and/or special setup procedures GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps keep engine timing and fuel injection running in sync
Helps provid ...
4
Acdelcoâ„¢ Engine Crankshaft Position Sensor GM
GM Description: Incl.Bolt and Seal. Express, savana. 4.3l. 4.3L, 2008-14.
5
Acdelcoâ„¢ Knock Sensor GM
GM Description: Silverado, sierra. 4.3l. 4.3L, 2008-14. Express, savana. 4.3l.
5
Ignition Knock (Detonation) Sensor GM
GM Description: 4.3L. Sends signals to the engine control module (ECM) to adjust timing
Helps prevent damage to the engine caused by pre-ignition
Ignition Knock (Detonation) Sensor.
Ignition Knock (Detonation) Sensor.
MSRP $26.57
$17.14
MSRP $26.57
$17.14
6
Ignition Coil GM
GM Description: Equinox, Torrent. 3.4l. Silverado, sierra. 4.3l. Express, savana. 4.3l. Relay. Aztek, Rendezvous. 3.5l. Exc.Bracket & Bolts. Vue. 3.5l. G6. 3.9l. Montana SV6. 3.5l. Aura. 3.5l.
MSRP $185.76
$115.17
MSRP $185.76
$115.17
7
Ignition Coil Mounting Bracket GM
GM Description: 2003-05, 5.3L. 6.2L without supercharger. 6.0 & 6.2L. 7.0L. 2008-09. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
A bracket for a ignition coil mounting.
A bracket for a ignition coil mounting.
MSRP $41.52
$26.16
MSRP $41.52
$26.16
No.
Part # / Description / Price
Price
2
Engine Control Module Bracket GM
GM Description: This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
Original equipment parts are designed to work with your GM vehicle safety systems - aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
A bracket for a engine control module.
A bracket for a engine control module.
5
Ignition Coil Wire GM
GM Description: 4.8, 5.3, 6.0 & 6.2L. 2003-05, 5.3L. 6.2L without supercharger. Wire connector. 7.0L. 2008-09. Insulated to help protect the interior conductor wire
Form fitting boots on each end prevent moisture from entering the coil or distributor
MSRP $248.98
$152.50
MSRP $248.98
$152.50
5
Engine Wiring Harness GM
GM Description: 2wd. This GM Genuine Part is designed, engineered, and tested to rigorous standards and is backed by General Motors
5
Acdelcoâ„¢ Engine Wiring Harness GM
GM Description: 4.8, 5.3, 6.0 & 6.2L. 6.2L without supercharger. 5.3L. Plug wire. 2008-09. 7.0L. Sedan,.
6
Acdelcoâ„¢ Spark Plug GM
GM Description: Vendor:acdelco. Vendor #41-101. 3.4L. 3.5L. 4.3L. Iridium. Platinum. Vendor #41-921. 3.1L. 3.8L, without supercharged.
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Positions: Left
Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Positions: Right
Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
1
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
3
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
3
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
3
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
3
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
3
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
3
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
3
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
No.
Part # / Description / Price
Price
3
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
Related Parts
Part # / Description / Price
Price
Ignition Coil GM
GM Description: High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated ...
Iridium Spark Plug GM
GM Description: Vendor:acdelco. Vendor #41-101. 3.4L. 3.5L. Iridium. 4.3L. Platinum. Vendor #41-921. 3.1L. 3.8L, without supercharged. Iridium is the latest in spark plug technology and is an exact replacement for vehicles' original components
Iridium composition provides ...
MSRP $16.46
$10.62
MSRP $16.46
$10.62
Spark Plug Wire Set GM
GM Description: Express, savana. 4.3l. Wire set. Silverado, sierra. 4.3l. 4.3L, 2008-2014. Durable to help transfer high voltage pulses without damage
Spark Plug Wire Set.
Spark Plug Wire Set.
MSRP $169.92
$105.35
MSRP $169.92
$105.35
Acdelcoâ„¢ Spark Plug GM
GM Description: Vendor:acdelco. Vendor #41-101. 3.4L. 3.5L. 4.3L. Iridium. Platinum. Vendor #41-921. 3.1L. 3.8L, without supercharged.