Bumper & Components - Front for 2011 Audi A4
No.
Part # / Description / Price
Price
1
Bumper Cover 
Audi
Audi Description: A4, w/S-Line Pkg 2009-2012. S4 2010-2012.
Fits A4, S4
A4, w/S-Line Pkg, 2009-2012. S4, 2010-2012. S4, 2010-2012. A4, w/ s-Line Pkg 2009-2012. Genuine Audi Bumper Cover 8K0-807-105-D-GRU. This original equipment component forms part of the vehicle's v ...
MSRP $2,109.32
$1,645.27
MSRP $2,109.32
$1,645.27
1
Bumper Cover Audi
Audi Positions: Front
Description: A4, without s-line pkg 2009-2012. The original equipment Audi Bumper Cover supplied under part number 8K0-807-105-GRU forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1,323.33
$1,032.20
MSRP $1,323.33
$1,032.20
2
Bumper Cover Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with bumper cover.
Description: S4, 2010-2012. A4, without s-line pkg 2009-2012. This genuine Audi Bumper Cover Bracket, part number 8K0-807-277, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $35.18
$24.01
MSRP $35.18
$24.01
3
Bumper Cover Bolt Audi
Audi Positions: Left
Description: This factory Audi Bumper Cover Bolt (N-101-602-04) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.38
$2.30
MSRP $3.38
$2.30
6
Tow Eye Cap Audi
Audi Notes: PARTS: Part included with bumper cover.
Description: S4, 2010-2012. A4, with s-line pkg 2009-2012. This factory Audi Tow Eye Cap (8K0-807-241-A-GRU) is a genuine Audi accessory engineered to the vehicle's mounting points and load limits, so it fits without drilling and carries a defined capacity rating. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $62.48
$50.20
MSRP $62.48
$50.20
7
Bumper Cover Spacer Panel Audi
Audi Description: S4, 2010-2012. A4, with s-line pkg 2009-2012. This genuine Audi Bumper Cover Spacer Panel, part number 8K0-807-233-B, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $240.00
$183.60
MSRP $240.00
$183.60
8
Radiator Mount Bolt Audi
Audi Positions: Right
Description: Genuine Audi Radiator Mount Bolt N-909-675-02. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.08
$2.09
MSRP $3.08
$2.09
9
Radiator Support Splash Shield Nut Audi
Audi Positions: Left
Description: Listed under Audi part number 8K0-805-922-A, this Radiator Support Splash Shield Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
10
Bumper Cover Reinforcement Audi
Audi Description: S4, 2010-2012. A4, with s-line pkg 2009-2012. The original equipment Audi Bumper Cover Reinforcement supplied under part number 8K0-807-899 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $55.32
$44.44
MSRP $55.32
$44.44
11
Lift-Gate Trim Cover Screw Audi
Audi Description: This genuine Audi Lift-Gate Trim Cover Screw, part number N-105-072-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $2.78
$1.89
MSRP $2.78
$1.89
13
Valance Panel Audi
Audi Description: A4, with s-line pkg 2009-2012. Spoiler. The original equipment Audi Valance Panel supplied under part number 8K0-807-110-1RR forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $250.00
$191.25
MSRP $250.00
$191.25
14
Spoiler Rivet Audi
Audi Description: This factory Audi Spoiler Rivet (N-038-549-1) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $1.80
$1.24
MSRP $1.80
$1.24
15
Bumper Impact Absorber Audi
Audi Description: A4, without s-line pkg, 2009-2012, from 02/06/2010. S4, 2010-2012, from 02/06/2010. The original equipment Audi Bumper Impact Absorber supplied under part number 8K0-807-550-J forms part of the vehicle's visible exterior surface, so panel gap, contour, an ...
MSRP $236.66
$181.05
MSRP $236.66
$181.05
16
Impact Bar Audi
Audi Positions: Front
Description: 2010-12 A5. 2013-16. 2013-17 A5. 2013-17 A5, w/o S-Line Pkg Covers & Reinforcements. 2013-17 A5, w/S-Line Pkg Covers & Reinforcements. 2013-17 Covers & Reinforcements S5. 2013-17 S5. A4, w/o S-Line Pkg 2009-2012. A4, w/o S-Line Pkg 2013-2016. A4, w/S-Line ...
MSRP $815.01
$618.59
MSRP $815.01
$618.59
17
Bumper Impact Bar Bolt Audi
Audi Positions: Left
Description: This factory Audi Bumper Impact Bar Bolt (N-100-362-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $14.88
$10.12
MSRP $14.88
$10.12
18
Bumper Cover Support Rail Audi
Audi Positions: Left
Description: S4, 2010-2012. A4, without s-line pkg 2009-2012. Audi part number 8K0-807-333-A, the factory Bumper Cover Support Rail, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $57.65
$46.32
MSRP $57.65
$46.32
18
Bumper Cover Support Rail Audi
Audi Positions: Front right
Description: S4, 2010-2012. A4, without s-line pkg 2009-2012. Audi part number 8K0-807-334-A, the factory Bumper Cover Support Rail, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $57.65
$46.32
MSRP $57.65
$46.32
20
Window Regulator Nut Audi
Audi Positions: Right
Description: Listed under Audi part number N-015-082-10, this Window Regulator Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
21
Shock Mount Bolt Audi
Audi Positions: Right
Description: Listed under Audi part number N-906-484-02, this Shock Mount Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $2.56
$1.74
MSRP $2.56
$1.74
22
Bumper Guide Audi
Audi Positions: Right
Description: S4, 2010-2012. A4, without s-line pkg 2009-2012. This factory Audi Bumper Guide (8K0-807-284) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $55.38
$37.08
MSRP $55.38
$37.08
22
Bumper Guide Audi
Audi Positions: Front left
Description: S4, 2010-2012. A4, without s-line pkg 2009-2012. Audi part number 8K0-807-283, the factory Bumper Guide, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $55.38
$37.08
MSRP $55.38
$37.08
23
Fender Liner Screw Audi
Audi Positions: Right
Description: Audi part number N-910-570-01, the factory Fender Liner Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.59
$2.43
MSRP $3.59
$2.43
24
Bumper Cover Support Rail Nut Audi
Audi Positions: Right
Description: Audi part number N-904-880-05, the factory Bumper Cover Support Rail Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
25
Bumper Cover Spacer Panel Audi
Audi Description: 2010-12, A5. 2010-12, S5. S4, 2010-2012. A4, without s-line pkg 2009-2012. Cover. This genuine Audi Bumper Cover Spacer Panel, part number 8T0-807-217-A-01C, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $70.98
$57.03
MSRP $70.98
$57.03
26
Grille Audi
Audi Positions: Right
Description: S4, 2010-2012, with auto cruise. A4, with S-LINE PKG 2009-2012. with auto cruise. Audi part number 8K0-807-682-E-01C, the factory Grille, finishes and protects an exterior surface, and while the function is partly cosmetic, these components also manage airflow, shield against debris, and seal transitions between panels. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $107.63
$81.69
MSRP $107.63
$81.69
26
Grille Audi
Audi Positions: Right
Description: S4, 2010-2012, without auto cruise. A4, with S-LINE PKG 2009-2012. without auto cruise. This genuine Audi Grille, part number 8K0-807-682-C-01C, finishes and protects an exterior surface, and while the function is partly cosmetic, these components also manage airflow, shield against debris, and seal transitions between panels. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $138.31
$104.98
MSRP $138.31
$104.98
26
Grille Audi
Audi Positions: Left
Description: A4, with S-LINE PKG 2009-2012. with auto cruise. The original equipment Audi Grille supplied under part number 8K0-807-681-C-01C finishes and protects an exterior surface, and while the function is partly cosmetic, these components also manage airflow, shield against debris, and seal transitions between panels. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $132.97
$100.93
MSRP $132.97
$100.93