Structural Components & Rails for 2011 Audi A6
No.
Part # / Description / Price
Price
1
Frame Side Member Assembly 
Audi
Audi Positions: Right
Description: A6. Genuine Audi Frame Side Member Assembly 4F0-803-104-A. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
1
Frame Side Member Assembly Audi
Audi Positions: Left
Description: A6. The original equipment Audi Frame Side Member Assembly supplied under part number 4F0-803-103-A carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
2
Fender Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: A6. Genuine Audi Fender Bracket 4F0-805-870. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1,507.68
$1,239.69
MSRP $1,507.68
$1,239.69
2
Fender Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: A6. This factory Audi Fender Bracket (4F0-805-869) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $1,507.68
$1,239.69
MSRP $1,507.68
$1,239.69
3
Fender Brace Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: The original equipment Audi Fender Brace supplied under part number 4F0-806-242-A forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $39.58
$27.01
MSRP $39.58
$27.01
3
Fender Brace Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Audi part number 4F0-806-241-A, the factory Fender Brace, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $45.78
$30.65
MSRP $45.78
$30.65
3
Fender Brace Audi
Audi Positions: Right
Description: This genuine Audi Fender Brace, part number 4F0-821-136-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $138.32
$104.98
MSRP $138.32
$104.98
3
Fender Brace Audi
Audi Positions: Left
Description: Listed under Audi part number 4F0-821-135-B, this Fender Brace forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $138.32
$104.98
MSRP $138.32
$104.98
3
Fender Brace Audi
Audi Positions: Left
Description: 3.0, 3.2L. 5.2L. Listed under Audi part number 4F0-809-891, this Fender Brace forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $6.88
$4.68
MSRP $6.88
$4.68
3
Fender Brace Audi
Audi Positions: Right
Description: 3.0, 3.2L. 5.2L. Listed under Audi part number 4F0-809-892, this Fender Brace forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $6.88
$4.68
MSRP $6.88
$4.68
3
Fender Brace Audi
Audi Positions: Left
Description: A6. Genuine Audi Fender Brace 4F0-802-451. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $123.32
$93.60
MSRP $123.32
$93.60
3
Fender Brace Audi
Audi Positions: Right
Description: A6. Genuine Audi Fender Brace 4F0-802-452. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $118.32
$89.80
MSRP $118.32
$89.80
4
Floor Side Rail Reinforcement Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: A6. The original equipment Audi Floor Side Rail Reinforcement supplied under part number 4F0-803-125-B carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
4
Floor Side Rail Reinforcement Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: A6. Listed under Audi part number 4F0-803-126-B, this Floor Side Rail Reinforcement carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
5
Suspension Strut Tower Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: This factory Audi Suspension Strut Tower Bracket (4F0-803-697-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $99.98
$75.89
MSRP $99.98
$75.89
5
Suspension Strut Tower Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: This factory Audi Suspension Strut Tower Bracket (4F0-803-698-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $99.98
$75.89
MSRP $99.98
$75.89
6
Suspension Strut Tower Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: Listed under Audi part number 4F0-802-172-B, this Suspension Strut Tower Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $66.65
$53.55
MSRP $66.65
$53.55
6
Suspension Strut Tower Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Genuine Audi Suspension Strut Tower Bracket 4F0-802-171-B. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $66.65
$53.55
MSRP $66.65
$53.55
7
Bumper Impact Absorber Sleeve Audi
Audi Positions: Left
Description: This genuine Audi Bumper Impact Absorber Sleeve, part number 4F0-802-265, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
7
Bumper Impact Absorber Sleeve Audi
Audi Positions: Right
Description: Genuine Audi Bumper Impact Absorber Sleeve 4F0-802-266. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
8
Bumper Impact Absorber Bracket Audi
Audi Positions: Left
Description: The original equipment Audi Bumper Impact Absorber Bracket supplied under part number 4F0-898-265 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $708.31
$537.61
MSRP $708.31
$537.61
8
Bumper Impact Absorber Bracket Audi
Audi Positions: Right
Description: Genuine Audi Bumper Impact Absorber Bracket 4F0-898-266. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $704.15
$534.45
MSRP $704.15
$534.45
9
Fender Rail Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with repair kit.
Description: Audi part number 4F0-805-606-C, the factory Fender Rail Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $241.66
$184.88
MSRP $241.66
$184.88
10
Fender Rail Audi
Audi Positions: Left
Description: This genuine Audi Fender Rail, part number 4F0-809-201, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $504.15
$382.65
MSRP $504.15
$382.65
10
Fender Rail Audi
Audi Positions: Right
Description: The original equipment Audi Fender Rail supplied under part number 4F0-809-202 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $799.99
$607.19
MSRP $799.99
$607.19
11
Fender Rail Reinforcement Audi
Audi Positions: Left
Description: Genuine Audi Fender Rail Reinforcement 4F0-809-111-K. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $395.82
$302.80
MSRP $395.82
$302.80
11
Fender Rail Reinforcement Audi
Audi Positions: Right
Description: This genuine Audi Fender Rail Reinforcement, part number 4F0-809-112-K, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $395.82
$302.80
MSRP $395.82
$302.80
11
Fender Rail Reinforcement Audi
Audi Positions: Left
Description: Genuine Audi Fender Rail Reinforcement 4F0-803-113. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $50.18
$33.60
MSRP $50.18
$33.60
11
Fender Rail Reinforcement Audi
Audi Positions: Right
Description: This factory Audi Fender Rail Reinforcement (4F0-803-114) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $50.18
$33.60
MSRP $50.18
$33.60
13
Fender Rail Audi
Audi Positions: Right
Description: From vin 4f6153601 to vin 4f8069900, from vin 4f6153601 to vin 4f8069900. From VIN 4F8069901. Listed under Audi part number 4F0-803-108-B, this Fender Rail forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point ali ...
MSRP $133.32
$101.19
MSRP $133.32
$101.19
13
Fender Rail Audi
Audi Positions: Left
Description: From vin 4f6153601 to vin 4f8069900, from vin 4f6153601 to vin 4f8069900. From VIN 4F8069901. Listed under Audi part number 4F0-803-107-B, this Fender Rail forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point ali ...
MSRP $133.32
$101.19
MSRP $133.32
$101.19
15
Fender Reinforcement Bar Audi
Audi Positions: Left
Description: A6. This factory Audi Fender Reinforcement Bar (4F0-802-117) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $383.32
$293.24
MSRP $383.32
$293.24
15
Fender Reinforcement Bar Audi
Audi Positions: Right
Description: A6. Genuine Audi Fender Reinforcement Bar 4F0-802-118. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $383.32
$293.24
MSRP $383.32
$293.24
16
Suspension Strut Tower Bracket Audi
Audi Positions: Right
Description: Listed under Audi part number 4F0-810-254-B, this Suspension Strut Tower Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $194.98
$149.16
MSRP $194.98
$149.16
16
Suspension Strut Tower Bracket Audi
Audi Positions: Left
Description: This genuine Audi Suspension Strut Tower Bracket, part number 4F0-810-253-B, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $86.52
$65.67
MSRP $86.52
$65.67
17
Suspension Strut Tower Audi
Audi Positions: Right
Description: This genuine Audi Suspension Strut Tower, part number 4F0-805-148-C, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
17
Suspension Strut Tower Audi
Audi Positions: Left
Description: Listed under Audi part number 4F0-805-147-C, this Suspension Strut Tower controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
18
Suspension Strut Tower Bracket Audi
Audi Positions: Left
Description: This factory Audi Suspension Strut Tower Bracket (4F0-805-263-C) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $73.75
$59.25
MSRP $73.75
$59.25
18
Suspension Strut Tower Bracket Audi
Audi Positions: Right
Description: Genuine Audi Suspension Strut Tower Bracket 4F0-805-264-C. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $31.38
$21.42
MSRP $31.38
$21.42
20
Fender Bracket Audi
Audi Description: Audi part number 4F0-614-135-B, the factory Fender Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $57.98
$46.58
MSRP $57.98
$46.58
21
Fender Reinforcement Bar Bracket Audi
Audi Positions: Right
Description: A6. This factory Audi Fender Reinforcement Bar Bracket (4F0-803-332) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $99.99
$75.89
MSRP $99.99
$75.89
21
Fender Reinforcement Bar Bracket Audi
Audi Positions: Left
Description: A6. Listed under Audi part number 4F0-803-331, this Fender Reinforcement Bar Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
22
Tow Hook Audi
Audi Description: Sedan. Wagon. The original equipment Audi Tow Hook supplied under part number 8E0-805-616-D is a genuine Audi accessory engineered to the vehicle's mounting points and load limits, so it fits without drilling and carries a defined capacity rating. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $96.67
$73.37
MSRP $96.67
$73.37
23
Cowl Crossmember Audi
Audi Description: A6. This genuine Audi Cowl Crossmember, part number 4F0-806-603-B, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $773.34
$586.96
MSRP $773.34
$586.96
24
Cowl Crossmember Bracket Audi
Audi Description: A6. Audi part number 4F0-805-629-A, the factory Cowl Crossmember Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $188.32
$144.06
MSRP $188.32
$144.06
25
Suspension Strut Mount Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with crossmember assembly.
Description: A6. Audi part number 4F0-805-739-D, the factory Suspension Strut Mount Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $189.98
$145.34
MSRP $189.98
$145.34
25
Suspension Strut Mount Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with crossmember assembly.
Description: A6. Listed under Audi part number 4F0-805-740-D, this Suspension Strut Mount Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $189.98
$145.34
MSRP $189.98
$145.34