Engine & Trans Mounting for 2011 Audi A6 Quattro
No.
Part # / Description / Price
Price
1
Engine Mount 
Audi
Audi Positions: Right
Description: A6. Rear. With electric. Right. 3.0L. 3.2L, to vin 4f5087150. Listed under Audi part number 4F0-199-382-BL, this Engine Mount controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $548.34
$394.80
MSRP $548.34
$394.80
2
Engine Mount Audi
Audi Positions: Left
Description: A6. Rear. With electric. Left. 3.0L. 3.2L, to vin 4f5087150. The original equipment Audi Engine Mount supplied under part number 4F0-199-379-BH controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $456.67
$328.80
MSRP $456.67
$328.80
3
Engine Mount Bracket Audi
Audi Positions: Right
Description: 3.2L. 3.0L. The original equipment Audi Engine Mount Bracket supplied under part number 4F0-199-352-M is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $287.81
$220.18
MSRP $287.81
$220.18
4
Engine Mount Bracket Audi
Audi Positions: Left
Description: 3.2L. 3.0L. Listed under Audi part number 4F0-199-351-S, this Engine Mount Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $327.81
$250.78
MSRP $327.81
$250.78
5
Engine Mount Support Bracket Audi
Audi Positions: Right
Description: 3.2L. 3.0L. The original equipment Audi Engine Mount Support Bracket supplied under part number 4F0-199-308-N is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $224.98
$172.11
MSRP $224.98
$172.11
6
Engine Mount Support Bracket Audi
Audi Positions: Left
Description: 3.2L. 3.0L. This genuine Audi Engine Mount Support Bracket, part number 4F0-199-307-M, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $196.65
$150.44
MSRP $196.65
$150.44
7
Engine Mount Bracket Audi
Audi Description: 3.2L. A6. 3.0L. The original equipment Audi Engine Mount Bracket supplied under part number 4B0-199-335-L is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $109.32
$78.71
MSRP $109.32
$78.71
8
Engine Mount Bushing Audi
Audi Description: This genuine Audi Engine Mount Bushing, part number 8E0-199-339, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $25.58
$15.35
MSRP $25.58
$15.35
9
Engine Mount Support Bracket Audi
Audi Description: Front support. 3.2L. A6. 3.0L. This factory Audi Engine Mount Support Bracket (4F0-199-343-G) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $192.98
$147.63
MSRP $192.98
$147.63
10
Transmission Crossmember Audi
Audi Description: 3.2L. 3.0L. 4.2L. This genuine Audi Transmission Crossmember, part number 4F0-399-403, manages torque delivery between the engine and the driveline, where hydraulic pressure control, clutch pack condition, and fluid quality determine both shift feel and service life. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $79.15
$63.59
MSRP $79.15
$63.59
11
Cross-Member Mount Bolt Audi
Audi Description: 3.2L. 3.0L. 4.2L. 5.2L. Listed under Audi part number N-910-666-01, this Cross-Member Mount Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.00
$1.36
MSRP $2.00
$1.36
12
Transmission Crossmember Audi
Audi Description: 3.0L, from 3/10/09. 4.2L, from 3/10/09. Listed under Audi part number 4F0-399-263-AD, this Transmission Crossmember manages torque delivery between the engine and the driveline, where hydraulic pressure control, clutch pack condition, and fluid quality determine both shift feel and service life. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $749.98
$569.24
MSRP $749.98
$569.24
13
Trans Mount Audi
Audi Description: A6. 3.0L, trans code kku. 4.2L, trans code kku. 5.2L. The original equipment Audi Trans Mount supplied under part number 4F0-399-151-AP is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, ...
13
Trans Mount Audi
Audi Description: 3.0L, trans code kks or kkt, trans code kks or kkt. 4.2L, trans code kks or kkt, trans code kks or kkt. 3.2L. Genuine Audi Trans Mount 4F0-399-151-AN. This original equipment component is a small but load bearing element of the assembly, and using the fac ...
14
Rear Support Audi
Audi Description: 4.2L. 3.0L. 3.2L. Genuine Audi Rear Support 4F0-399-115-AL. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.