Brake Components for 2012 Audi A3
No.
Part # / Description / Price
Price
1
Disc Brake Rotor 
Audi
Audi Positions: Left
Description: Without awd, 253mm. A3. With diesel. This genuine Audi Disc Brake Rotor, part number 5Q0-615-601-F, handles the conversion of kinetic energy into heat during braking, so its friction material, metallurgy, and thermal capacity directly determine stopping distance and pedal feel. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $77.11
$63.40
MSRP $77.11
$63.40
1
Disc Brake Rotor Audi
Audi Positions: Rear
Description: A3. Without diesel. With awd, without S3 model. Genuine Audi Disc Brake Rotor 5Q0-615-601-D. This original equipment component handles the conversion of kinetic energy into heat during braking, so its friction material, metallurgy, and thermal capacity directly determine stopping distance and pedal feel. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $74.15
$60.73
MSRP $74.15
$60.73
2
Wheel Bearing and Hub Assembly Audi
Audi Positions: Left
Description: Convertible, without awd. Sedan/wagon, without awd. A3. Without e-tron. 1.8l. This factory Audi Wheel Bearing and Hub Assembly (5Q0-598-611) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $345.82
$264.55
MSRP $345.82
$264.55
2
Wheel Bearing and Hub Assembly Audi
Audi Positions: Rear
Description: Fwd. Q3. 32mm. Without awd. TT. Without Quattro. This genuine Audi Wheel Bearing and Hub Assembly, part number 3G0-598-611-A, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
3
Axle Bolt Audi
Audi Positions: Left
Notes: PARTS: Part included with wheel bearing.
Description: Convertible, without awd. Fwd. Mount bolt. The original equipment Audi Axle Bolt supplied under part number WHT-007-150 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $20.58
$14.05
MSRP $20.58
$14.05
4
Wheel Bearing Dust Cap Audi
Audi Positions: Left
Notes: PARTS: Part included with wheel bearing.
Description: Without Quattro. Convertible, without awd. Fwd. Sedan, without awd. This genuine Audi Wheel Bearing Dust Cap, part number 1J0-501-249-C, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $18.78
$12.77
MSRP $18.78
$12.77
5
Disc Brake Caliper Audi
Audi Positions: Left
Description: Without awd, with 253mm rotor. A3. Left. Without awd. 2.0l tdi. The original equipment Audi Disc Brake Caliper supplied under part number 1K0-615-423-J carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $472.49
$358.61
MSRP $472.49
$358.61
5
Disc Brake Caliper Audi
Audi Positions: Right
Description: Without awd, with 253mm rotor. A3. Right. Without awd. 2.0l tdi. Genuine Audi Disc Brake Caliper 1K0-615-424-J. This original equipment component carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $489.99
$371.90
MSRP $489.99
$371.90
5
Disc Brake Caliper Audi
Audi Positions: Left
Description: A3. Left. Without awd. 2.0l. Audi part number 5K0-615-423, the factory Disc Brake Caliper, carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $551.24
$418.39
MSRP $551.24
$418.39
6
Brake Bleeder Screw Audi
Audi Positions: Rear
Description: Audi part number 1K0-615-273-C, the factory Brake Bleeder Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $31.98
$21.83
MSRP $31.98
$21.83
7
Brake Bleeder Screw Cap Audi
Audi Positions: Right
Notes: PARTS: Part included with caliper.
Description: Genuine Audi Brake Bleeder Screw Cap 211-611-483. This original equipment component carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $15.10
$10.27
MSRP $15.10
$10.27
8
Parking Brake Adjusting Lever Spring Audi
Audi Positions: Left
Notes: PARTS: Part included with caliper.
Description: Parking Brake Spring. Without AWD. with 253mm rotor. Genuine Audi Parking Brake Adjusting Lever Spring 1K0-615-295. This original equipment component carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $15.10
$10.27
MSRP $15.10
$10.27
8
Parking Brake Adjusting Lever Spring Audi
Audi Positions: Right
Notes: PARTS: Part included with caliper.
Description: Parking Brake Spring. Without AWD. with 253mm rotor. This genuine Audi Parking Brake Adjusting Lever Spring, part number 1K0-615-296, carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $15.10
$10.27
MSRP $15.10
$10.27
8
Spring Audi
Audi Positions: Left
Notes: PARTS: Part included with caliper.
Description: Without AWD. with 272mm rotor. Parking Brake Spring. Listed under Audi part number 5K0-615-295, this Spring is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $30.18
$20.60
MSRP $30.18
$20.60
9
Disc Brake Pad Set Audi
Audi Description: With awd. A3. 2.0l. This genuine Audi Disc Brake Pad Set, part number 5K0-698-451-D, handles the conversion of kinetic energy into heat during braking, so its friction material, metallurgy, and thermal capacity directly determine stopping distance and pedal feel. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $104.60
$86.01
MSRP $104.60
$86.01
9
Disc Brake Pad Set Audi
Audi Description: Without awd, with 253mm rotor. A3. 2.0l tdi. The original equipment Audi Disc Brake Pad Set supplied under part number 5K0-698-451-E handles the conversion of kinetic energy into heat during braking, so its friction material, metallurgy, and thermal capacity directly determine stopping distance and pedal feel. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $84.63
$69.58
MSRP $84.63
$69.58
10
Disc Brake Caliper Bracket Audi
Audi Positions: Left
Description: Without awd, with 253mm rotor. This factory Audi Disc Brake Caliper Bracket (1K0-615-425-P) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $284.98
$218.01
MSRP $284.98
$218.01
11
Disc Brake Caliper Pin Boot Audi
Audi Positions: Left
Notes: PARTS: Part included with caliper mount.
Description: This genuine Audi Disc Brake Caliper Pin Boot, part number 1K0-698-470, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
11
Boot Kit Audi
Audi Positions: Left
Notes: PARTS: Part included with caliper mount.
Description: Without AWD. with 272mm rotor. Boot. This genuine Audi Boot Kit, part number 5K0-698-470, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
12
Brake Dust Shield Audi
Audi Positions: Left
Description: A3. Left. 2.0l tdi. Without awd, from vin 8p8057779. Listed under Audi part number 1K0-615-611-AB, this Brake Dust Shield handles the conversion of kinetic energy into heat during braking, so its friction material, metallurgy, and thermal capacity directly determine stopping distance and pedal feel. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $113.65
$86.26
MSRP $113.65
$86.26
12
Brake Dust Shield Audi
Audi Positions: Right
Description: A3. Right. 2.0l tdi. Without awd, from vin 8p8057779. This genuine Audi Brake Dust Shield, part number 1K0-615-612-AB, handles the conversion of kinetic energy into heat during braking, so its friction material, metallurgy, and thermal capacity directly determine stopping distance and pedal feel. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $113.65
$86.26
MSRP $113.65
$86.26
12
Brake Dust Shield Audi
Audi Positions: Left
Description: A3. Without awd. Left. 2.0l. This factory Audi Brake Dust Shield (1T0-615-611-B) handles the conversion of kinetic energy into heat during braking, so its friction material, metallurgy, and thermal capacity directly determine stopping distance and pedal feel. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $78.09
$62.73
MSRP $78.09
$62.73
12
Brake Dust Shield Audi
Audi Positions: Right
Description: A3. Without awd. Right. 2.0l. Audi part number 1T0-615-612-B, the factory Brake Dust Shield, handles the conversion of kinetic energy into heat during braking, so its friction material, metallurgy, and thermal capacity directly determine stopping distance and pedal feel. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $78.09
$62.73
MSRP $78.09
$62.73
14
Brake Line Audi
Audi Positions: Rear left
Description: Without awd. This genuine Audi Brake Line, part number 1K0-611-763-E, carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $108.32
$82.21
MSRP $108.32
$82.21
14
Brake Line Audi
Audi Positions: Rear right
Description: Without awd. Genuine Audi Brake Line 1K0-611-764-L. This original equipment component carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $108.32
$82.21
MSRP $108.32
$82.21
15
ABS Wheel Speed Sensor Audi
Audi Positions: Right
Description: A3. Without awd. Right. Fwd, without park sensor. To 11/02/2009. TT. Without Quattro. Exc.Automated Parking System. Listed under Audi part number WHT-003-858-C, this ABS Wheel Speed Sensor feeds wheel behavior data to the stability and antilock control st ...
MSRP $103.32
$78.42
MSRP $103.32
$78.42
15
ABS Wheel Speed Sensor Audi
Audi Positions: Left
Description: A3. Without awd. Left. Fwd, without park sensor. TT. Without Quattro. Exc.Automated Parking System. From 11/02/2009. To 11/02/2009. Listed under Audi part number WHT-003-859-C, this ABS Wheel Speed Sensor feeds wheel behavior data to the stability and ant ...
MSRP $103.25
$78.37
MSRP $103.25
$78.37
16
ABS Wheel Speed Sensor Wiring Harness Audi
Audi Positions: Right
Description: Without awd, without ride select. Audi part number 1K0-927-904-AR, the factory ABS Wheel Speed Sensor Wiring Harness, feeds wheel behavior data to the stability and antilock control strategy, so signal accuracy determines whether the system can modulate individual wheels correctly during a limit event. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $167.68
$138.96
MSRP $167.68
$138.96
16
ABS Wheel Speed Sensor Wiring Harness Audi
Audi Positions: Left
Description: Without awd. Genuine Audi ABS Wheel Speed Sensor Wiring Harness 1K0-927-904-AS. This original equipment component feeds wheel behavior data to the stability and antilock control strategy, so signal accuracy determines whether the system can modulate individual wheels correctly during a limit event. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $186.14
$154.26
MSRP $186.14
$154.26
16
ABS Wheel Speed Sensor Wiring Harness Audi
Audi Positions: Left
Description: Without awd, with ride select. The original equipment Audi ABS Wheel Speed Sensor Wiring Harness supplied under part number 8P0-927-904-D feeds wheel behavior data to the stability and antilock control strategy, so signal accuracy determines whether the s ...
MSRP $221.52
$183.59
MSRP $221.52
$183.59
16
ABS Wheel Speed Sensor Wiring Harness Audi
Audi Positions: Right
Description: Without awd, with ride select. Audi part number 8P0-927-904-F, the factory ABS Wheel Speed Sensor Wiring Harness, feeds wheel behavior data to the stability and antilock control strategy, so signal accuracy determines whether the system can modulate individual wheels correctly during a limit event. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $221.52
$183.59
MSRP $221.52
$183.59
16
ABS Wheel Speed Sensor Wiring Harness Audi
Audi Positions: Rear left
Description: Exc.Magnetic Ride Control. Exc.Automatic Headlight Range Control Dynamic. Exc.Adaptive Headlight System. This factory Audi ABS Wheel Speed Sensor Wiring Harness (1K0-927-904-BA) feeds wheel behavior data to the stability and antilock control strategy, so ...
MSRP $167.68
$138.96
MSRP $167.68
$138.96