Trunk for 2012 Audi R8
No.
Part # / Description / Price
Price
1
Deck Lid 
Audi
Audi Description: Coupe. This genuine Audi Deck Lid, part number 420-827-739-G, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
2
Deck Lid Stop Buffer Audi
Audi Positions: Left
Description: Coupe. Engine lid,damper. Listed under Audi part number 420-827-522-A, this Deck Lid Stop Buffer forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $61.98
$49.80
MSRP $61.98
$49.80
3
Engine Lid Spacer Audi
Audi Positions: Right
Description: Coupe. Genuine Audi Engine Lid Spacer 420-827-549. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $22.00
$15.02
MSRP $22.00
$15.02
4
Lift-Gate Stop Bumper Audi
Audi Positions: Right
Description: The original equipment Audi Lift-Gate Stop Bumper supplied under part number 8P4-827-239-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $14.66
$9.97
MSRP $14.66
$9.97
5
Hood Seal Audi
Audi Description: Coupe. The original equipment Audi Hood Seal supplied under part number 420-827-459 creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
5
Hood Seal Audi
Audi Positions: Front right rearward
Description: This genuine Audi Hood Seal, part number 420-823-734, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $110.32
$83.73
MSRP $110.32
$83.73
5
Hood Seal Audi
Audi Positions: Front left rearward
Description: The original equipment Audi Hood Seal supplied under part number 420-823-733 creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $110.32
$83.73
MSRP $110.32
$83.73
5
Hood Seal Audi
Audi Positions: Front lower
Description: Genuine Audi Hood Seal 420-823-731-A. This original equipment component creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $238.34
$182.33
MSRP $238.34
$182.33
6
Hinge Audi
Audi Positions: Left
Description: Coupe. to vin 429000950. Listed under Audi part number 420-827-305-C, this Hinge manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $191.65
$146.61
MSRP $191.65
$146.61
6
Hinge Audi
Audi Positions: Right
Description: Coupe. to vin 429000950. Genuine Audi Hinge 420-827-306-C. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $191.65
$146.61
MSRP $191.65
$146.61
7
Hinge Upper Bolt Audi
Audi Positions: Right
Description: Coupe. High voltage. Audi part number N-107-343-01, the factory Hinge Upper Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1.32
$0.90
MSRP $1.32
$0.90
8
Belt Cover Bolt Audi
Audi Positions: Right
Description: Coupe. Convertible,. High voltage charging unit, m8x16. This factory Audi Belt Cover Bolt (N-909-624-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $0.54
$0.37
MSRP $0.54
$0.37
9
Bumper Impact Absorber Washer Audi
Audi Positions: Right
Description: Coupe. Audi part number N-900-333-12, the factory Bumper Impact Absorber Washer, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1.26
$0.86
MSRP $1.26
$0.86
10
Drive Motor Battery Pack Tray Nut Audi
Audi Positions: Left
Description: 48 volt. Convertible,. Coupe. Suv. 4.0L. Wagon. Capacitor. 3.0L. 2.0L, condenser and compressor. The original equipment Audi Drive Motor Battery Pack Tray Nut supplied under part number N-106-092-04 is a small but load bearing element of the assembly, and ...
MSRP $3.31
$2.26
MSRP $3.31
$2.26
11
Hood Stop Buffer Audi
Audi Positions: Right
Description: Coupe. This genuine Audi Hood Stop Buffer, part number 4E0-823-429, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1.74
$1.18
MSRP $1.74
$1.18
12
Hood Safety Catch Bracket Audi
Audi Description: Coupe. This genuine Audi Hood Safety Catch Bracket, part number 4E0-823-203-B, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $21.78
$14.86
MSRP $21.78
$14.86
12
Deck Lid Striker Audi
Audi Positions: Rear
Description: Convertible. Listed under Audi part number 427-827-507, this Deck Lid Striker manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
13
Radiator Support Splash Shield Bolt Audi
Audi Description: Audi part number N-909-747-01, the factory Radiator Support Splash Shield Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $0.65
$0.53
MSRP $0.65
$0.53
14
Scuff Plate Grommet Audi
Audi Description: Coupe. With 1.4L. Listed under Audi part number N-909-946-01, this Scuff Plate Grommet is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.74
$0.50
MSRP $0.74
$0.50
15
Trunk Lock Actuator Motor Audi
Audi Description: A8, S8. From vin 4e5010201. Coupe. Without spyder. R8. This genuine Audi Trunk Lock Actuator Motor, part number 4E0-823-509-H, conditions and distributes cabin air, where refrigerant charge, airflow path integrity, and actuator calibration together determine whether the system reaches its target temperature. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $247.14
$207.60
MSRP $247.14
$207.60
16
Exhaust Manifold Heat Shield Bolt Audi
Audi Description: Coupe. 5.2L. Convertible,. 4.2L feed. Retaining brkt,bolt. Gas, auxiliary, 2015-18. 4.2L, return. Gas, auxiliary, 2013-14. The original equipment Audi Exhaust Manifold Heat Shield Bolt supplied under part number N-907-809-04 is a small but load bearing el ...
MSRP $1.06
$0.72
MSRP $1.06
$0.72
17
Release Cable Audi
Audi Description: Coupe. Release cable. R8. This factory Audi Release Cable (420-827-531-E) carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $125.98
$95.62
MSRP $125.98
$95.62
17
Deck Lid Release Cable Audi
Audi Positions: Rear
Description: Emergency cable. Coupe. Audi part number 420-827-531-F, the factory Deck Lid Release Cable, carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
20
Liftgate Lift Support Audi
Audi Positions: Left
Description: Coupe, without carbon engine cover, without carbon engine cover. R8. This genuine Audi Liftgate Lift Support, part number 420-827-552, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $105.00
$79.70
MSRP $105.00
$79.70
21
Support Cylinder Ball Stud Audi
Audi Positions: Left
Description: Convertible. Apron & upper rail. Coupe. from 4/05/10. This genuine Audi Support Cylinder Ball Stud, part number 8Z0-827-439, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.74
$6.62
MSRP $9.74
$6.62