Engine & Trans Mounting for 2013 Audi A7 Quattro
No.
Part # / Description / Price
Price
1
Engine Mount 
Audi
Audi Positions: Right
Description: A6. Right. A7. 3.0L gas. This factory Audi Engine Mount (4G0-199-381-LF) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $468.33
$354.06
MSRP $468.33
$354.06
2
Engine Mount Audi
Audi Positions: Left
Description: A6. Left. A7. 3.0L gas. This factory Audi Engine Mount (4G0-199-381-LE) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $423.33
$304.80
MSRP $423.33
$304.80
3
Engine Mount Bolt Audi
Audi Positions: Right
Description: 4.0L. 2012-15, with awd. 2016-18, without awd. Gas, m10x125x45. 3.0L diesel, m10x125x45. 2.0L 2016-18 with awd. Motor mount,mount bolt. Genuine Audi Engine Mount Bolt N-102-076-02. This original equipment component is a small but load bearing element of t ...
MSRP $16.18
$11.00
MSRP $16.18
$11.00
3
Engine Mount Support Bracket Bolt Audi
Audi Description: Audi part number N-912-750-01, the factory Engine Mount Support Bracket Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $10.25
$6.98
MSRP $10.25
$6.98
5
Engine Mount Support Bracket Audi
Audi Positions: Right
Description: This factory Audi Engine Mount Support Bracket (4G0-199-308-N) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $344.14
$260.18
MSRP $344.14
$260.18
6
Engine Mount Support Bracket Audi
Audi Positions: Left
Description: 3.0L gas. Mount bracket. Support bracket. This factory Audi Engine Mount Support Bracket (4G0-199-307-H) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $391.67
$299.63
MSRP $391.67
$299.63
6
Engine Mount Support Bracket Audi
Audi Positions: Left
Description: 3.0L gas. Retainer plate. 3.0L diesel. This factory Audi Engine Mount Support Bracket (4G0-399-059-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $110.00
$83.49
MSRP $110.00
$83.49
7
Support Bolt Audi
Audi Positions: Right
Description: The original equipment Audi Support Bolt supplied under part number N-107-026-03 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1.15
$0.79
MSRP $1.15
$0.79
9
Engine Mount Heat Shield Audi
Audi Positions: Right
Description: 3.0L gas. 3.0L, auto trans. 3.0L, 2010-12. 3.0L, manual trans, 2010-2012. 3.2L, auto trans. 3.0L, 2013-17. This genuine Audi Engine Mount Heat Shield, part number 8K0-199-388-BF, controls wheel motion and isolates the body from road input, so its spring r ...
MSRP $25.97
$17.72
MSRP $25.97
$17.72
10
Engine Mount Heat Shield Audi
Audi Positions: Left
Description: 3.0L gas. 3.0L, 2013-17. 3.0L, 2010-12. Coupe, 3.0L, auto trans. 3.2L, manual trans. 3.0L, manual trans. 3.2L, auto trans. This genuine Audi Engine Mount Heat Shield, part number 8K0-199-387-T, controls wheel motion and isolates the body from road input, ...
MSRP $59.99
$48.20
MSRP $59.99
$48.20
11
Engine Mount Heat Shield Bolt Audi
Audi Positions: Right
Description: The original equipment Audi Engine Mount Heat Shield Bolt supplied under part number N-907-246-03 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $4.12
$2.80
MSRP $4.12
$2.80
11
Side Shield Bolt Audi
Audi Positions: Rear
Description: The original equipment Audi Side Shield Bolt supplied under part number N-106-532-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.72
$1.85
MSRP $2.72
$1.85
12
Engine Mount Bracket Audi
Audi Positions: Right
Description: Gas. 2.0L, manual trans, 2013-2016. 2.0L, with awd, 2013-17. Diesel. 2.0L, auto trans, 2013-17. Coupe, 2.0L, manual trans, 2013-17. With hybrid. Coupe, 3.0L, manual trans. 3.0L, 2013-17. This genuine Audi Engine Mount Bracket, part number 4G0-399-378-J, i ...
MSRP $34.46
$23.52
MSRP $34.46
$23.52
14
Engine Mount Isolator Audi
Audi Positions: Right
Description: 4.0L. 2012-15, without awd. 3.0L gas. 4.2L. 3.0L diesel. 2.0L 2016-18 with awd. This factory Audi Engine Mount Isolator (4H0-199-340-B) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set bo ...
MSRP $7.32
$4.98
MSRP $7.32
$4.98
15
Engine Cradle Audi
Audi Description: 4.0L. Gas. Diesel. Audi part number 4G0-399-315-L, the factory Engine Cradle, operates inside the engine's rotating and sealing envelope, where clearances measured in hundredths of a millimeter decide oil control, compression sealing, and long term durability. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2,449.99
$2,169.46
MSRP $2,449.99
$2,169.46
16
Engine Cradle Bolt Audi
Audi Description: The original equipment Audi Engine Cradle Bolt supplied under part number WHT-005-657 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $10.84
$7.37
MSRP $10.84
$7.37
17
Suspension Sub-Frame Cross-Member Brace Audi
Audi Description: 4.0L. Gas. Diesel. This factory Audi Suspension Sub-Frame Cross-Member Brace (4H0-399-345-Q) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $250.00
$191.25
MSRP $250.00
$191.25
18
Suspension Cross-Member Bolt Audi
Audi Description: A7. S7. 4.0L. Gas. Diesel. This factory Audi Suspension Cross-Member Bolt (N-911-742-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $13.51
$9.21
MSRP $13.51
$9.21
19
Suspension Cross-Member Bolt Audi
Audi Description: 4.0L. Gas. Diesel. This genuine Audi Suspension Cross-Member Bolt, part number N-911-741-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.74
$6.62
MSRP $9.74
$6.62
20
Transmission Crossmember Audi
Audi Description: 2012-15, with awd. 3.0L gas. 4.0L, with RS7. 3.0L diesel. 2.0L 2016-18 with awd. Genuine Audi Transmission Crossmember 4G0-399-263-AC. This original equipment component manages torque delivery between the engine and the driveline, where hydraulic pressure ...
MSRP $496.81
$377.08
MSRP $496.81
$377.08
21
Automatic Transmission Mount Bracket Audi
Audi Description: 2012-15, with awd. 4.0L, with RS7. 3.0L gas. 3.0L diesel. 2.0L 2016-18 with awd. Support. Audi part number 4G0-399-115-G, the factory Automatic Transmission Mount Bracket, is a small but load bearing element of the assembly, and using the factory specific ...
MSRP $105.01
$79.70
MSRP $105.01
$79.70
21
Automatic Transmission Mount Insulator Audi
Audi Description: 2.9L. Gas. 2020-24. 2017-19. 2.0L 2016-18 with awd. Diesel. 2.0L 2012-15 with awd. 4.0L. with RS7. The original equipment Audi Automatic Transmission Mount Insulator supplied under part number 4M0-399-291 controls wheel motion and isolates the body from r ...
MSRP $25.40
$17.34
MSRP $25.40
$17.34
22
Automatic Transmission Mount Bolt Audi
Audi Description: Audi part number N-106-718-01, the factory Automatic Transmission Mount Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
23
Automatic Transmission Mount Audi
Audi Description: 2012-15, with awd. 2016-18, with awd. A6. With Quattro. RS7. 3.0L gas. A7. 3.0L diesel. The original equipment Audi Automatic Transmission Mount supplied under part number 4M0-399-153-AA controls wheel motion and isolates the body from road input, so its ...
MSRP $418.34
$316.26
MSRP $418.34
$316.26
25
Belt Tensioner Bolt Audi
Audi Description: This genuine Audi Belt Tensioner Bolt, part number N-910-211-02, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.36
$2.96
MSRP $4.36
$2.96
26
Automatic Transmission Mount Nut Audi
Audi Description: Audi part number N-911-574-01, the factory Automatic Transmission Mount Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
27
Engine Mount Heat Shield Audi
Audi Positions: Right
Description: 4.0L. Gas. 3.0L diesel. This factory Audi Engine Mount Heat Shield (4G0-399-300-A) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $43.18
$28.91
MSRP $43.18
$28.91
28
Engine Mount Heat Shield Audi
Audi Positions: Left
Description: 4.0L. Gas. 3.0L diesel. Audi part number 4G0-399-299-A, the factory Engine Mount Heat Shield, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $46.38
$31.05
MSRP $46.38
$31.05
30
Window Regulator Nut Audi
Audi Positions: Right
Description: Listed under Audi part number N-015-082-10, this Window Regulator Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
31
Engine Mount Heat Shield Audi
Audi Positions: Right
Description: 4.0L. Gas. 3.0L diesel. Listed under Audi part number 4G0-399-300-B, this Engine Mount Heat Shield controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $43.78
$29.31
MSRP $43.78
$29.31
32
Engine Mount Heat Shield Audi
Audi Positions: Left
Description: 4.0L. Gas. 3.0L diesel. This factory Audi Engine Mount Heat Shield (4G0-399-299-B) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $43.78
$29.31
MSRP $43.78
$29.31