Splash Shields for 2014 Audi A4
No.
Part # / Description / Price
Price
1
Radiator Support Splash Shield 
Audi
Audi Description: 2.0 Liter. 2.0 Liter Auto Trans. 3.0 Liter. Radiator Support Splash Shield. Baffle Plate. Carrier. Center Cover. Cover panel. Crossmember. Deflector. End Plate. Front Cover. Front Deflector. Liner extension. Lower Cover. Lower Plate. Radiator Support Splas ...
MSRP $578.34
$416.40
MSRP $578.34
$416.40
1
Radiator Support Splash Shield Audi
Audi Description: Coupe, 2.0L, manual trans. The original equipment Audi Radiator Support Splash Shield supplied under part number 8K1-863-821-B moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss ...
MSRP $630.00
$478.17
MSRP $630.00
$478.17
2
Radiator Support Splash Shield Guide Pin Audi
Audi Notes: PARTS: Part included with front shield.
Description: Genuine Audi Radiator Support Splash Shield Guide Pin 8w0805121. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $5.20
$3.54
MSRP $5.20
$3.54
4
Radiator Mount Bolt Audi
Audi Description: Genuine Audi Radiator Mount Bolt N-909-675-02. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.08
$2.09
MSRP $3.08
$2.09
5
Radiator Support Splash Shield Nut Audi
Audi Description: Listed under Audi part number 8K0-805-922-A, this Radiator Support Splash Shield Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
5
Engine Air Intake Hose Nut Audi
Audi Positions: Front
Description: 3.0L. 2.0L plug-in hybrid. 2013-2016. 4.2L. 3.2L. This genuine Audi Engine Air Intake Hose Nut, part number N-906-106-02, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
6
Radiator Support Splash Shield Audi
Audi Description: 2.0 Liter. 2013-2016. 3.0 Liter. All. Radiator Support Splash Shield.
Fits A4, allroad, Q5, S4, SQ5
2.0 Liter. 2013-2016, From 05/07/2012. 2013-2016, to 05/04/2012. 3.0 Liter. All. All. 2.0L. 3.0L. 2013-2016, From 05/07/2012. The original equipment Au ...
MSRP $408.33
$294.00
MSRP $408.33
$294.00
7
Quarter Panel Splash Shield Screw Audi
Audi Notes: PARTS: Part included with rear shield.
Description: Genuine Audi Quarter Panel Splash Shield Screw N-907-750-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
9
Radiator Support Splash Shield Rivet Audi
Audi Description: Inner shield,rivet. Rear shield,rivet. 2017-25. With sportback. 2013-2016. Coupe,. 4.2L. 3.2L. Genuine Audi Radiator Support Splash Shield Rivet 8K0-863-788. This original equipment component is a small but load bearing element of the assembly, and using ...
MSRP $7.21
$4.91
MSRP $7.21
$4.91
10
Fender Splash Shield Audi
Audi Positions: Right
Description: Audi part number 8K0-853-888-A, the factory Fender Splash Shield, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $59.31
$47.66
MSRP $59.31
$47.66
10
Fender Splash Shield Audi
Audi Positions: Left
Description: This factory Audi Fender Splash Shield (8K0-853-887-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $59.31
$47.66
MSRP $59.31
$47.66
10
Fender Splash Shield Audi
Audi Positions: Front left
Description: A4, without s-line pkg. This genuine Audi Fender Splash Shield, part number 8K0-821-171-P, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $246.67
$188.70
MSRP $246.67
$188.70
10
Fender Splash Shield Audi
Audi Positions: Front right
Description: A4, without s-line pkg. S4. Genuine Audi Fender Splash Shield 8K0-821-172-P. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $201.65
$154.26
MSRP $201.65
$154.26
11
Fender Liner Screw Audi
Audi Positions: Left
Description: Audi part number N-910-570-01, the factory Fender Liner Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.59
$2.43
MSRP $3.59
$2.43
12
Fender Liner Extension Clip Audi
Audi Positions: Right
Description: Genuine Audi Fender Liner Extension Clip 8K0-821-213-A. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48