Shop Parts & Accessories

Shop Aftermarket

Shop Clearance

Tire AutoNation Parts

Tires, wheels, and more.

We can get you there

Categories

Browse Categories

Mufflers for 2014 Audi Q5

Mufflers for 2014 Audi Q5 #0
4
No.
Part # / Description / Price
Price
1
Catalytic Converter 1
Audi Audi
Description: Fits A4, A5, allroad, Q5, S4 2.0 Liter. 2.0 Liter, Sedan. 2013-2016. A4 2.0L. A5 2.0L. Allroad. Convertible, 2.0 Liter. Coupe, 2.0 Liter. Q5 2.0L. w/o Hybrid. A5. 2.0l. A4. 2.0l. Q5. 2.0l. Allroad. 2013-2016. 2.0L, Sedan. Coupe, 2.0L. w/o Hybrid. This ...
MSRP $3,064.27
$2,702.69
MSRP $3,064.27
$2,702.69
2
Catalytic Converter Lock Nut
Audi Audi
Description: The original equipment Audi Catalytic Converter Lock Nut supplied under part number WHT-002-514 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
3
Gasket
Audi Audi
Description: The original equipment Audi Gasket supplied under part number 8K0-253-115-L creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $14.42
$9.81
MSRP $14.42
$9.81
3
Catalytic Converter Gasket
Audi Audi
Positions: Rear
Description: Audi part number 8W0-253-115-P, the factory Catalytic Converter Gasket, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $15.45
$10.51
MSRP $15.45
$10.51
4
Bracket
Audi Audi
Description: The original equipment Audi Bracket supplied under part number 8K0-253-376-B is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $45.58
$30.52
MSRP $45.58
$30.52
4
Exhaust System Hanger Bracket
Audi Audi
Description: Audi part number 8K0-253-295, the factory Exhaust System Hanger Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $38.11
$26.02
MSRP $38.11
$26.02
4
Exhaust System Hanger Bracket
Audi Audi
Description: Without hybrid. 2.0L 2012-15. 2013-2016. Convertible, 2.0L. Coupe, 2.0L. The original equipment Audi Exhaust System Hanger Bracket supplied under part number 06H-145-533 is a small but load bearing element of the assembly, and using the factory specificat ...
MSRP $68.34
$54.90
MSRP $68.34
$54.90
4
Exhaust System Hanger Bracket
Audi Audi
Description: Without hybrid. 2.0L 2012-15. Support. 2013-2016. Convertible, 2.0L. Coupe, 2.0L.
4
Exhaust System Hanger Bracket
Audi Audi
Description: The original equipment Audi Exhaust System Hanger Bracket supplied under part number 8K0-253-144-E is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $73.33
$58.92
MSRP $73.33
$58.92
4
Exhaust System Hanger Bracket
Audi Audi
Description: Audi part number 8K0-253-144-F, the factory Exhaust System Hanger Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $96.49
$73.23
MSRP $96.49
$73.23
4
Exhaust System Hanger Bracket
Audi Audi
Positions: Left
Description: Gas. Without hybrid. 3.2L. Diesel. This genuine Audi Exhaust System Hanger Bracket, part number 8R0-253-144-B, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $130.00
$98.67
MSRP $130.00
$98.67
4
Exhaust System Hanger Bracket
Audi Audi
Positions: Right
Description: Gas. Without hybrid. 3.2L. Diesel. The original equipment Audi Exhaust System Hanger Bracket supplied under part number 8R0-253-144-C is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, co ...
MSRP $132.98
$100.93
MSRP $132.98
$100.93
5
Exhaust System Hanger Bolt
Audi Audi
Description: This factory Audi Exhaust System Hanger Bolt (N-100-493-08) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $4.86
$3.30
MSRP $4.86
$3.30
5
Exhaust System Hanger Bolt
Audi Audi
Positions: Upper
Description: Genuine Audi Exhaust System Hanger Bolt N-040-301-6. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $5.64
$3.84
MSRP $5.64
$3.84
8
Washer
Audi Audi
Description: This genuine Audi Washer, part number N-011-670-26, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.46
$2.35
MSRP $3.46
$2.35
9
Exhaust Manifold Bolt And Spring
Audi Audi
Description: Audi part number 893-253-353, the factory Exhaust Manifold Bolt And Spring, delivers metered, filtered air to the combustion chambers, and any unmetered air or restriction on this path shifts fuel trims and dulls throttle response. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $28.87
$19.71
MSRP $28.87
$19.71
10
Exhaust System Hanger Sleeve
Audi Audi
Description: This genuine Audi Exhaust System Hanger Sleeve, part number 4B0-253-205-C, routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $13.84
$9.41
MSRP $13.84
$9.41
11
Plate Lock Nut
Audi Audi
Description: Bracket,lock nut. Without hybrid. 3.2L. To x090000. 2006-08. 4.2L. Coupe, 2.0L. Convertible, 3.0L. Coupe, 3.0L. 3.0L diesel. This genuine Audi Plate Lock Nut, part number N-023-003-13, is a small but load bearing element of the assembly, and using the fac ...
MSRP $1.50
$1.22
MSRP $1.50
$1.22
12
Exhaust System Hanger Bolt
Audi Audi
Description: Audi part number N-010-244-26, the factory Exhaust System Hanger Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1.40
$0.95
MSRP $1.40
$0.95
13
Exhaust System Hanger Spacer
Audi Audi
Description: Audi part number 4B0-253-205-D, the factory Exhaust System Hanger Spacer, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $25.40
$17.34
MSRP $25.40
$17.34
14
Exhaust System Hanger Insulator
Audi Audi
Description: Genuine Audi Exhaust System Hanger Insulator 4A0-253-149-B. This original equipment component routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $23.06
$15.74
MSRP $23.06
$15.74
15
Exhaust Pipe
Audi Audi
Description: Audi part number 8K0-253-102-AC, the factory Exhaust Pipe, routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
16
Exhaust Pipe Lock Nut
Audi Audi
Description: This factory Audi Exhaust Pipe Lock Nut (N-911-308-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1.28
$0.87
MSRP $1.28
$0.87
18
Exhaust Muffler
Audi Audi
Description: Q5. Without diesel. Front. 2.0l. With hybrid. This factory Audi Exhaust Muffler (8R0-253-409-T) routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1,538.45
$1,264.99
MSRP $1,538.45
$1,264.99
18
Exhaust Muffler
Audi Audi
Positions: Right
Description: Q5. Without diesel. Rear. Right. 2.0l. Without hybrid. Genuine Audi Exhaust Muffler 8R0-253-609-AH. This original equipment component routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1,257.68
$1,034.12
MSRP $1,257.68
$1,034.12
18
Exhaust Muffler
Audi Audi
Positions: Left
Description: Q5. Without diesel. Rear. With hybrid. Listed under Audi part number 8R0-253-609-AR, this Exhaust Muffler routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $938.91
$772.02
MSRP $938.91
$772.02
19
Exhaust Clamp
Audi Audi
Description: Genuine Audi Exhaust Clamp 1k0253141p. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $16.94
$11.52
MSRP $16.94
$11.52
21
Exhaust Muffler
Audi Audi
Positions: Left
Description: Q5. Without diesel. Rear. Left. 2.0l. Without hybrid. Listed under Audi part number 8R0-253-609-AG, this Exhaust Muffler routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1,257.67
$1,034.12
MSRP $1,257.67
$1,034.12
22
Exhaust Muffler Clamp
Audi Audi
Positions: Right
Description: Audi part number 1K0-253-141-M, the factory Exhaust Muffler Clamp, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $63.98
$51.40
MSRP $63.98
$51.40
26
Exhaust System Hanger Bolt
Audi Audi
Positions: Right
Description: Genuine Audi Exhaust System Hanger Bolt N-019-531-5. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.86
$3.30
MSRP $4.86
$3.30
1 This price excludes a refundable manufacturer's core charge. Add the part to your cart to see the core charge.