Structural Components & Rails for 2015 Audi Q5
No.
Part # / Description / Price
Price
1
Frame Side Member 
Audi
Audi Positions: Left
Description: Listed under Audi part number 8R0-802-037-A, this Frame Side Member carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
1
Frame Side Member Audi
Audi Positions: Right
Description: The original equipment Audi Frame Side Member supplied under part number 8R0-802-038-A carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
2
Floor Side Rail Reinforcement Audi
Audi Positions: Right
Description: To 02/02/2015. Frm 02/03/2015. The original equipment Audi Floor Side Rail Reinforcement supplied under part number 8R0-804-190 carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
2
Floor Side Rail Reinforcement Audi
Audi Positions: Left
Description: To 02/02/2015. Frm 02/03/2015. This genuine Audi Floor Side Rail Reinforcement, part number 8R0-804-189, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
3
Floor Side Rail Audi
Audi Positions: Left
Description: This genuine Audi Floor Side Rail, part number 8R0-803-107-A, is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
3
Floor Side Rail Audi
Audi Positions: Right
Description: Audi part number 8R0-803-108, the factory Floor Side Rail, is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $209.12
$159.97
MSRP $209.12
$159.97
4
Bumper Impact Bar Bracket Audi
Audi Positions: Right
Description: This genuine Audi Bumper Impact Bar Bracket, part number 8R0-805-678, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $106.83
$81.07
MSRP $106.83
$81.07
4
Bumper Impact Bar Bracket Audi
Audi Positions: Left
Description: The original equipment Audi Bumper Impact Bar Bracket supplied under part number 8R0-805-677 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $106.83
$81.07
MSRP $106.83
$81.07
4
Bumper Impact Bar Bracket Audi
Audi Positions: Left
Description: With s-line pkg, from 02/01/2009. With SQ5. Listed under Audi part number 8R0-807-331-D, this Bumper Impact Bar Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $253.34
$193.80
MSRP $253.34
$193.80
4
Bumper Impact Bar Bracket Audi
Audi Positions: Left
Description: 2013-17, with distance sensor. 2009-12, with distance sensor. Audi part number 8R0-807-133-A, the factory Bumper Impact Bar Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coa ...
MSRP $250.01
$191.25
MSRP $250.01
$191.25
5
Frame Side Member Reinforcement Audi
Audi Positions: Left
Description: This factory Audi Frame Side Member Reinforcement (8R0-802-849-A) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
5
Frame Side Member Reinforcement Audi
Audi Positions: Right
Description: Audi part number 8R0-802-850-A, the factory Frame Side Member Reinforcement, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
6
Frame Side Member Audi
Audi Positions: Left
Notes: PARTS: Part included with inner side rail.
Description: This genuine Audi Frame Side Member, part number 8R0-803-717-B, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
6
Frame Side Member Audi
Audi Positions: Right
Notes: PARTS: Part included with inner side rail.
Description: Audi part number 8R0-803-718-D, the factory Frame Side Member, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
7
Fender Rail Mount Plate Audi
Audi Positions: Right
Notes: PARTS: Part included with inner side rail. Order by application.
Description: The original equipment Audi Fender Rail Mount Plate supplied under part number 8R0-802-172 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
7
Fender Rail Mount Plate Audi
Audi Positions: Left
Notes: PARTS: Part included with inner side rail. Order by application.
Description: The original equipment Audi Fender Rail Mount Plate supplied under part number 8R0-802-171 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
8
Fender Rail Reinforcement Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with inner side rail.
Description: This genuine Audi Fender Rail Reinforcement Bracket, part number 8R0-803-697, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
8
Fender Rail Reinforcement Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with inner side rail.
Description: This factory Audi Fender Rail Reinforcement Bracket (8R0-803-698) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $121.66
$92.33
MSRP $121.66
$92.33
9
Fender Apron Extension Audi
Audi Positions: Right
Description: This genuine Audi Fender Apron Extension, part number 8R0-801-118-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $441.65
$335.21
MSRP $441.65
$335.21
9
Fender Apron Extension Audi
Audi Positions: Left
Description: This factory Audi Fender Apron Extension (8R0-801-117-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $441.65
$335.21
MSRP $441.65
$335.21
10
Fender Apron Assembly Audi
Audi Positions: Right
Description: Genuine Audi Fender Apron Assembly 8R0-805-140-B. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $801.54
$659.07
MSRP $801.54
$659.07
10
Fender Apron Assembly Audi
Audi Positions: Left
Description: The original equipment Audi Fender Apron Assembly supplied under part number 8R0-805-139-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $795.82
$604.02
MSRP $795.82
$604.02
11
Support Audi
Audi Positions: Right
Notes: PARTS: Part included with apron assembly.
Description: To 02/02/2015. Frm 02/03/2015. Genuine Audi Support 8R0-805-872-A. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
11
Support Audi
Audi Positions: Left
Notes: PARTS: Part included with apron assembly.
Description: To 02/02/2015. Frm 02/03/2015. This genuine Audi Support, part number 8R0-805-869-A, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
12
Fender Rail Audi
Audi Positions: Right
Notes: PARTS: Part included with apron assembly.
Description: The original equipment Audi Fender Rail supplied under part number 8R0-805-304-A forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $144.78
$109.89
MSRP $144.78
$109.89
12
Fender Rail Audi
Audi Positions: Left
Notes: PARTS: Part included with apron assembly.
Description: The original equipment Audi Fender Rail supplied under part number 8R0-805-303-A forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $144.78
$109.89
MSRP $144.78
$109.89
13
Fender Rail Reinforcement Audi
Audi Positions: Left
Notes: PARTS: Part included with apron assembly.
Description: This factory Audi Fender Rail Reinforcement (8R0-806-027) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $256.66
$196.35
MSRP $256.66
$196.35
13
Fender Rail Reinforcement Audi
Audi Positions: Right
Notes: PARTS: Part included with apron assembly.
Description: Listed under Audi part number 8R0-806-028, this Fender Rail Reinforcement forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $251.14
$192.13
MSRP $251.14
$192.13
14
Suspension Strut Mount Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with apron assembly.
Description: This factory Audi Suspension Strut Mount Bracket (8R0-803-358) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $34.70
$23.68
MSRP $34.70
$23.68
14
Suspension Strut Mount Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with apron assembly.
Description: This genuine Audi Suspension Strut Mount Bracket, part number 8R0-803-357, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $34.70
$23.68
MSRP $34.70
$23.68
15
Fender Rail Reinforcement Brace Audi
Audi Positions: Left
Notes: PARTS: Part included with apron assembly.
Description: Audi part number 8R0-805-277-A, the factory Fender Rail Reinforcement Brace, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $116.66
$88.54
MSRP $116.66
$88.54
15
Fender Rail Reinforcement Brace Audi
Audi Positions: Right
Notes: PARTS: Part included with apron assembly.
Description: This factory Audi Fender Rail Reinforcement Brace (8R0-805-278-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $122.49
$92.96
MSRP $122.49
$92.96
16
Frame Rail End Audi
Audi Positions: Right
Notes: PARTS: Part included with inner side rail.
Description: Section. Genuine Audi Frame Rail End 8R0-803-352. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
16
Frame Rail End Audi
Audi Positions: Left
Notes: PARTS: Part included with inner side rail.
Description: Section. This genuine Audi Frame Rail End, part number 8R0-803-351, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.