Brackets, Flanges & Hangers for 2016 Audi A3
No.
Part # / Description / Price
Price
2
Trans Mount 
Audi
Audi Positions: Left
Description: Audi part number 5Q0-199-555-BJ, the factory Trans Mount, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $150.49
$108.35
MSRP $150.49
$108.35
3
Motor Mount Mount Bolt Audi
Audi Positions: Left
Description: The original equipment Audi Motor Mount Mount Bolt supplied under part number N-105-524-04 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1.78
$1.21
MSRP $1.78
$1.21
4
Engine Mount Bolt Audi
Audi Positions: Right
Description: This genuine Audi Engine Mount Bolt, part number N-107-069-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $1.10
$0.75
MSRP $1.10
$0.75
4
Floor Pan Splash Shield Bolt Audi
Audi Positions: Front left
Description: With sportback. Engine code: dhha, dsna. 2.5L. Engine code: czra, dspa. M10x35. Sedan, 1.8L, short. Sedan, 2.0L gas, short. 2.0L, diesel, short. The original equipment Audi Floor Pan Splash Shield Bolt supplied under part number N-106-997-01 is a small bu ...
MSRP $0.98
$0.67
MSRP $0.98
$0.67
5
Engine Mount Stud Audi
Audi Positions: Front left
Description: Sedan, 1.8L. 2.0L, diesel. This factory Audi Engine Mount Stud (N-107-707-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $6.74
$4.58
MSRP $6.74
$4.58
5
Engine Mount Stud Audi
Audi Positions: Front right
Description: This factory Audi Engine Mount Stud (N-910-296-02) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $2.22
$1.51
MSRP $2.22
$1.51
6
Support Audi
Audi Positions: Right
Description: This factory Audi Support (06J-199-207-S) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $323.32
$232.79
MSRP $323.32
$232.79
7
Automatic Transmission Mount Bracket Audi
Audi Positions: Left
Description: Genuine Audi Automatic Transmission Mount Bracket 1K0-199-117-AM. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $223.31
$170.84
MSRP $223.31
$170.84
8
Suspension Sub-Frame Reinforcement Bracket Audi
Audi Positions: Right
Description: Coupe. Sedan, 2.0L gas. 1.8L. This genuine Audi Suspension Sub-Frame Reinforcement Bracket, part number 5Q0-199-518-E, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $29.57
$20.19
MSRP $29.57
$20.19
8
Engine Mount Support Bracket Audi
Audi Description: Rear support. Sedan, 1.8L. 2.0L. This factory Audi Engine Mount Support Bracket (5Q0-199-855-AD) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $124.97
$89.99
MSRP $124.97
$89.99
9
Shock Mount Bolt Audi
Audi Description: The original equipment Audi Shock Mount Bolt supplied under part number N-910-661-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1.06
$0.68
MSRP $1.06
$0.68
10
Engine Mount Support Bracket Bolt Audi
Audi Description: Convertible, 2.0L, engine code cntc, m10x75. 2009-15 with awd, tts. Convertible, 1.8L, m10x75. Sedan, 2.0L gas, engine codes cntc,cyfb, m10x75. Listed under Audi part number N-911-671-01, this Engine Mount Support Bracket Bolt is a small but load bearing ...
MSRP $2.26
$1.54
MSRP $2.26
$1.54
10
Engine Mount Support Bracket Bolt Audi
Audi Description: Awd. Sedan, 1.8L, m10x50. Sedan, 2.0L gas, engine codes cntc,cyfb, m10x50. Rwd. This factory Audi Engine Mount Support Bracket Bolt (N-106-994-01) is a small but load bearing element of the assembly, and using the factory specification matters because thr ...
MSRP $5.64
$3.84
MSRP $5.64
$3.84
10
Suspension Cross-Member Bolt Audi
Audi Description: This genuine Audi Suspension Cross-Member Bolt, part number N-107-854-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $2.04
$1.39
MSRP $2.04
$1.39
10
Engine Mount Support Bracket Bolt Audi
Audi Description: M10x35. Side support,screw. Convertible, 2.0L, m10x30. 1.4L, m10x30. Sedan, 2.0L gas, m10x30. 1.8L. Mount,screw. Listed under Audi part number N-912-312-01, this Engine Mount Support Bracket Bolt is a small but load bearing element of the assembly, and us ...
MSRP $1.02
$0.69
MSRP $1.02
$0.69
11
Suspension Subframe Reinforcement Bracket Audi
Audi Positions: Left
Description: 2.0L. Convertible. This factory Audi Suspension Subframe Reinforcement Bracket (5Q7-199-517-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
11
Suspension Subframe Reinforcement Bracket Audi
Audi Positions: Right
Description: 2.0L. Convertible. Genuine Audi Suspension Subframe Reinforcement Bracket 5Q7-199-518-A. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.