Bumper for 2016 Audi RS7
No.
Part # / Description / Price
Price
1
Bumper Cover 
Audi
Audi Description: RS7. RS7 Cover & Brackets.
Fits RS7, RS7 Sportback, S7 Sportback
RS7. RS7, Cover & Brackets. RS7, Cover & Brackets. The original equipment Audi Bumper Cover supplied under part number 4G8-807-065-BR-GRU forms part of the vehicle's visible exterior sur ...
MSRP $4,959.81
$3,868.66
MSRP $4,959.81
$3,868.66
2
Fender Liner Screw Audi
Audi Description: Audi part number N-910-570-01, the factory Fender Liner Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.59
$2.43
MSRP $3.59
$2.43
2
Park Assist Camera Screw Audi
Audi Description: Camera and components. Coupe. With s-line. Convertible, rear camera. 4.2L. RS7. Audi part number N-909-159-01, the factory Park Assist Camera Screw, is a small but load bearing element of the assembly, and using the factory specification matters because t ...
MSRP $0.30
$0.20
MSRP $0.30
$0.20
3
Tow Eye Cap Audi
Audi Notes: PARTS: Part included with bumper cover.
Description: RS7. The original equipment Audi Tow Eye Cap supplied under part number 4G8-807-241-G-GRU is a genuine Audi accessory engineered to the vehicle's mounting points and load limits, so it fits without drilling and carries a defined capacity rating. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
4
Headlight Washer Cover Audi
Audi Positions: Left
Notes: PARTS: Part included with bumper cover.
Description: RS7. This factory Audi Headlight Washer Cover (4G8-955-275-F-GRU) provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $241.67
$184.88
MSRP $241.67
$184.88
4
Headlight Washer Cover Audi
Audi Positions: Right
Notes: PARTS: Part included with bumper cover.
Description: RS7. Audi part number 4G8-955-276-F-GRU, the factory Headlight Washer Cover, provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $241.67
$184.88
MSRP $241.67
$184.88
5
Radiator Support Air Deflector Audi
Audi Description: RS7. This genuine Audi Radiator Support Air Deflector, part number 4G8-807-899-C, moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling capacity shows up as performance and economy loss before it shows as overheating. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $175.00
$133.88
MSRP $175.00
$133.88
6
Bumper Trim Audi
Audi Description: The original equipment Audi Bumper Trim supplied under part number 4G8-807-717-B-AP6 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $913.34
$693.22
MSRP $913.34
$693.22
6
Bumper Trim Audi
Audi Description: RS7, cover & brackets, titanium gray. Audi part number 4G8-807-717-B-MI7, the factory Bumper Trim, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $791.67
$600.88
MSRP $791.67
$600.88
6
Bumper Trim Audi
Audi Description: The original equipment Audi Bumper Trim supplied under part number 4G8-807-717-C forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $6,596.48
$5,006.73
MSRP $6,596.48
$5,006.73
6
Bumper Trim Audi
Audi Positions: Rear
Description: RS7, cover & brackets, titanium. Listed under Audi part number 4G8-807-731-GRU, this Bumper Trim forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $1,793.99
$1,588.57
MSRP $1,793.99
$1,588.57
7
Lift-Gate Trim Screw Audi
Audi Description: RS7. Audi part number N-106-795-01, the factory Lift-Gate Trim Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $2.67
$1.82
MSRP $2.67
$1.82
8
License Bracket U-Nut Audi
Audi Description: This genuine Audi License Bracket U-Nut, part number N-900-942-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
9
Valance Panel Audi
Audi Description: RS7. The original equipment Audi Valance Panel supplied under part number 4G8-807-611-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $441.66
$335.23
MSRP $441.66
$335.23
10
Quarter Panel Splash Shield Screw Audi
Audi Description: Genuine Audi Quarter Panel Splash Shield Screw N-907-750-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
11
Air Inlet Duct U-Nut Audi
Audi Description: The original equipment Audi Air Inlet Duct U-Nut supplied under part number N-015-437-4 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
12
Spoiler Audi
Audi Description: A vehicle body part mounted flush to a body panel used to work w/ a vehicle aerodynamics used to create less drag and increased aerodynamics. A7 w/o Prestige Pkg. A7 w/o S-Line Pkg Covers & Brackets. A7 w/Prestige Pkg, S7. RS7. RS7 Cover & Brackets. Air D ...
MSRP $255.00
$195.08
MSRP $255.00
$195.08
13
Impact Bar Audi
Audi Description: 2012-15 A6, w/o S Line Pkg. 2012-15 A6, w/S Line Pkg. 2012-15 S6. 2016 A6, w/o S Line Type. 2016 A6, w/S Line Type. 2016-18 A6, w/S Type S6. 2017-18 A6, w/o S Type. A7 w/o Prestige Pkg. A7 w/o S-Line Pkg Covers & Brackets. A7 w/Prestige Pkg, S7. A7 w/S-Lin ...
MSRP $841.67
$638.83
MSRP $841.67
$638.83
14
Bumper Impact Bar Bolt Audi
Audi Positions: Left
Description: This factory Audi Bumper Impact Bar Bolt (N-100-362-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $14.88
$10.12
MSRP $14.88
$10.12
14
Radiator Mount Bolt Audi
Audi Description: Audi part number 8K0-805-399-B, the factory Radiator Mount Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
14
Side Member Assembly Bolt Audi
Audi Description: This genuine Audi Side Member Assembly Bolt, part number N-019-530-8, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.08
$6.17
MSRP $9.08
$6.17
15
Bumper Impact Bar Nut Audi
Audi Positions: Left
Description: The original equipment Audi Bumper Impact Bar Nut supplied under part number N-023-003-11 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
15
Impact Bar Nut Audi
Audi Description: This factory Audi Impact Bar Nut (N-103-401-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
16
Bumper Impact Absorber Audi
Audi Description: RS7. This factory Audi Bumper Impact Absorber (4G8-807-550-M) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $233.34
$178.50
MSRP $233.34
$178.50
17
Bumper Impact Bar Bracket Audi
Audi Positions: Left
Description: A7 with s-line pkg, S7, cover & brackets, S7. RS7. Listed under Audi part number 4G0-807-133-B, this Bumper Impact Bar Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $326.67
$249.90
MSRP $326.67
$249.90
17
Bumper Impact Bar Bracket Audi
Audi Positions: Right
Description: A7 with s-line pkg, S7, cover & brackets, S7. RS7. This factory Audi Bumper Impact Bar Bracket (4G0-807-134-B) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $326.67
$249.90
MSRP $326.67
$249.90
19
Bumper Cover Support Rail Audi
Audi Positions: Left
Description: A7 without prestige pkg. A7 without s-line pkg covers & brackets. A7 with s-line pkg, S7, cover & brackets. A7 with prestige pkg, S7. S6. RS7. The original equipment Audi Bumper Cover Support Rail supplied under part number 4G0-807-333 forms part of the v ...
MSRP $14.39
$9.78
MSRP $14.39
$9.78
20
Support Rivet Audi
Audi Positions: Left
Description: Listed under Audi part number N-907-657-01, this Support Rivet is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.74
$1.86
MSRP $2.74
$1.86
21
Support Brace Audi
Audi Positions: Left
Description: A7 with prestige pkg, S7. A7 without prestige pkg. A7 without s-line pkg covers & brackets. A7 with s-line pkg, S7, cover & brackets. RS7. Listed under Audi part number 4G8-807-591-C, this Support Brace carries structural load and defines the mounting geo ...
MSRP $37.78
$25.78
MSRP $37.78
$25.78
21
Support Brace Audi
Audi Positions: Right
Description: A7 without prestige pkg. A7 without s-line pkg covers & brackets. A7 with s-line pkg, S7 cover & brackets. A7 with prestige pkg, S7. RS7. The original equipment Audi Support Brace supplied under part number 4G8-807-592-C carries structural load and define ...
MSRP $37.78
$25.78
MSRP $37.78
$25.78
22
Bumper Cover Support Rail Rivet Audi
Audi Positions: Left
Description: Audi part number N-910-939-01, the factory Bumper Cover Support Rail Rivet, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.38
$2.30
MSRP $3.38
$2.30
23
Convertible Top Mounting Plate Bolt Audi
Audi Positions: Left
Description: Listed under Audi part number N-906-847-05, this Convertible Top Mounting Plate Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.08
$2.09
MSRP $3.08
$2.09
24
Bumper Cover Support Rail Nut Audi
Audi Positions: Left
Description: This genuine Audi Bumper Cover Support Rail Nut, part number N-906-887-03, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.24
$2.20
MSRP $3.24
$2.20
24
Fender Liner Nut Audi
Audi Description: Listed under Audi part number WHT-003-207, this Fender Liner Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.72
$2.53
MSRP $3.72
$2.53
25
Bumper Guide Audi
Audi Positions: Left
Description: A7 with prestige pkg, S7. A7 with s-line pkg, S7, cover & brackets. RS7. This factory Audi Bumper Guide (4G8-807-283-C) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $53.98
$36.14
MSRP $53.98
$36.14
25
Bumper Guide Audi
Audi Positions: Right
Description: A7 without prestige pkg. A7 without s-line pkg, covers & brackets. A7 with s-line pkg, S7, cover & brackets. A7 with prestige pkg, S7. RS7. The original equipment Audi Bumper Guide supplied under part number 4G8-807-284-C forms part of the vehicle's visib ...
MSRP $53.98
$36.14
MSRP $53.98
$36.14
26
Hood Release Cable Bolt Audi
Audi Positions: Left
Description: Genuine Audi Hood Release Cable Bolt N-909-995-03. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
26
Bumper Cover Support Rail Bolt Audi
Audi Description: Listed under Audi part number N-909-059-03, this Bumper Cover Support Rail Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $11.26
$7.66
MSRP $11.26
$7.66
27
Bumper Cover Stay Audi
Audi Positions: Left
Description: RS7. This genuine Audi Bumper Cover Stay, part number 4G8-807-095-E, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $261.66
$200.18
MSRP $261.66
$200.18
27
Bumper Cover Stay Audi
Audi Positions: Right
Description: RS7. Listed under Audi part number 4G8-807-096-E, this Bumper Cover Stay forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $261.66
$200.18
MSRP $261.66
$200.18
28
Bumper End Cap Audi
Audi Positions: Left
Description: RS7. This genuine Audi Bumper End Cap, part number 4G8-807-151-B, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $132.98
$100.93
MSRP $132.98
$100.93
28
Bumper End Cap Audi
Audi Positions: Right
Description: RS7. This genuine Audi Bumper End Cap, part number 4G8-807-152-B, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $132.98
$100.93
MSRP $132.98
$100.93
29
Radiator Support Air Duct Clip Audi
Audi Positions: Left
Description: Audi part number N-911-467-01, the factory Radiator Support Air Duct Clip, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.66
$2.48
MSRP $3.66
$2.48