Engine & Trans Mounting for 2016 Audi RS7
No.
Part # / Description / Price
Price
1
Engine Mount 
Audi
Audi Positions: Right
Description: Part number supersedes to: 4H0-199-384-B X1, 4H0-907-508 X1, N-107-148-01 X14.0 Liter. A part that locates and Supports the engine. It also Reduces vibrations From the engine. Carrier.. I. BEARING Support. Front. Motor. Side.
Fits A7 Sportback, RS7, RS7 Sportback, S6, S7, S7 Sportback
4.0 Liter. RS7 Right. S6 Right. S7 Right. S6. S7. RS7. 4.0L. Right.
A part that locates and supports the engine. It also reduces vibrations from the engine.
A part that locates and supports the engine. It also reduces vibrations from the engine.
2
Engine Mount Audi
Audi Positions: Left
Description: 4.0 Liter. A part that locates and Supports the engine. It also Reduces vibrations From the engine. Bracket. Carrier. Plate. Support.. I. BEARING Support. Front. Motor. Side.
Fits A7 Sportback, RS7, RS7 Sportback, S6, S7, S7 Sportback
4.0 Liter. RS7 Lef ...
MSRP $776.24
$558.89
MSRP $776.24
$558.89
3
Engine Mount Bolt Audi
Audi Positions: Right
Description: 4.0L, m10x35. Listed under Audi part number N-105-410-02, this Engine Mount Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.08
$2.09
MSRP $3.08
$2.09
3
Engine Mount Bolt Audi
Audi Positions: Right
Description: 4.0L, m10x45. Genuine Audi Engine Mount Bolt N-102-875-06. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $7.18
$4.88
MSRP $7.18
$4.88
3
Engine Mount Bolt Audi
Audi Positions: Right
Description: 4.0L. 2012-15, with awd. 2016-18, without awd. Gas, m10x125x45. 3.0L diesel, m10x125x45. 2.0L 2016-18 with awd. Motor mount,mount bolt. Genuine Audi Engine Mount Bolt N-102-076-02. This original equipment component is a small but load bearing element of t ...
MSRP $16.18
$11.00
MSRP $16.18
$11.00
3
Support Bolt Audi
Audi Description: The original equipment Audi Support Bolt supplied under part number N-107-026-03 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1.15
$0.79
MSRP $1.15
$0.79
4
Retainer Plate Audi
Audi Positions: Right
Description: 4.0L. Retainer plate. S7, RS7. Right. Audi part number 4G0-399-060-E, the factory Retainer Plate, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $244.99
$187.43
MSRP $244.99
$187.43
5
Retainer Plate Audi
Audi Positions: Left
Description: 4.0L. Retainer plate. S7, RS7. Left. Genuine Audi Retainer Plate 4G0-399-059-G. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $724.31
$549.76
MSRP $724.31
$549.76
6
Retainer Plate Bolt Audi
Audi Positions: Left
Description: The original equipment Audi Retainer Plate Bolt supplied under part number N-911-744-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
7
Engine Mount Support Bracket Audi
Audi Positions: Right
Description: 4.0L. Mount bracket. Mount support. Genuine Audi Engine Mount Support Bracket 4H0-199-308-AK. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, ...
MSRP $111.65
$84.74
MSRP $111.65
$84.74
8
Engine Mount Support Bracket Audi
Audi Positions: Left
Description: 4.0L. Mount bracket. Mount support. This genuine Audi Engine Mount Support Bracket, part number 4H0-199-307-AK, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $243.32
$186.14
MSRP $243.32
$186.14
10
Engine Mount Isolator Audi
Audi Positions: Left
Description: 4.0L. 2012-15, without awd. 3.0L gas. 4.2L. 3.0L diesel. 2.0L 2016-18 with awd. This factory Audi Engine Mount Isolator (4H0-199-340-B) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set bo ...
MSRP $7.32
$4.98
MSRP $7.32
$4.98
11
Transmission Crossmember Audi
Audi Description: 2012-15, with awd. 3.0L gas. 4.0L, with RS7. 3.0L diesel. 2.0L 2016-18 with awd. Genuine Audi Transmission Crossmember 4G0-399-263-AC. This original equipment component manages torque delivery between the engine and the driveline, where hydraulic pressure ...
MSRP $496.81
$377.08
MSRP $496.81
$377.08
12
Transmission Cross-Member Bolt Audi
Audi Description: Audi part number N-912-097-01, the factory Transmission Cross-Member Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1.48
$1.01
MSRP $1.48
$1.01
13
Automatic Transmission Mount Audi
Audi Description: 2012-15, with awd. 2016-18, with awd. A6. With Quattro. RS7. 3.0L gas. A7. 3.0L diesel. The original equipment Audi Automatic Transmission Mount supplied under part number 4M0-399-153-AA controls wheel motion and isolates the body from road input, so its ...
MSRP $418.34
$316.26
MSRP $418.34
$316.26
14
Automatic Transmission Mount Nut Audi
Audi Description: Audi part number N-911-574-01, the factory Automatic Transmission Mount Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
15
Automatic Transmission Mount Insulator Audi
Audi Description: 2.9L. Gas. 2020-24. 2017-19. 2.0L 2016-18 with awd. Diesel. 2.0L 2012-15 with awd. 4.0L. with RS7. The original equipment Audi Automatic Transmission Mount Insulator supplied under part number 4M0-399-291 controls wheel motion and isolates the body from r ...
MSRP $25.40
$17.34
MSRP $25.40
$17.34
16
Belt Tensioner Bolt Audi
Audi Description: This genuine Audi Belt Tensioner Bolt, part number N-910-211-02, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.36
$2.96
MSRP $4.36
$2.96
17
Automatic Transmission Mount Bracket Audi
Audi Description: 2012-15, with awd. 4.0L, with RS7. 3.0L gas. 3.0L diesel. 2.0L 2016-18 with awd. Support. Audi part number 4G0-399-115-G, the factory Automatic Transmission Mount Bracket, is a small but load bearing element of the assembly, and using the factory specific ...
MSRP $105.01
$79.70
MSRP $105.01
$79.70
19
Automatic Transmission Mount Bolt Audi
Audi Description: Audi part number N-106-718-01, the factory Automatic Transmission Mount Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
20
Engine Mount Heat Shield Audi
Audi Positions: Right
Description: 4.0L. Gas. 3.0L diesel. This factory Audi Engine Mount Heat Shield (4G0-399-300-A) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $43.18
$28.91
MSRP $43.18
$28.91
21
Engine Mount Heat Shield Audi
Audi Positions: Left
Description: 4.0L. Gas. 3.0L diesel. Audi part number 4G0-399-299-A, the factory Engine Mount Heat Shield, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $46.38
$31.05
MSRP $46.38
$31.05
22
Side Shield Bolt Audi
Audi Positions: Left
Description: The original equipment Audi Side Shield Bolt supplied under part number N-106-532-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.72
$1.85
MSRP $2.72
$1.85
23
Window Regulator Nut Audi
Audi Positions: Right
Description: Listed under Audi part number N-015-082-10, this Window Regulator Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
24
Engine Cradle Audi
Audi Description: 4.0L. Gas. Diesel. Audi part number 4G0-399-315-L, the factory Engine Cradle, operates inside the engine's rotating and sealing envelope, where clearances measured in hundredths of a millimeter decide oil control, compression sealing, and long term durability. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2,449.99
$2,169.46
MSRP $2,449.99
$2,169.46
25
Engine Cradle Bolt Audi
Audi Description: The original equipment Audi Engine Cradle Bolt supplied under part number WHT-005-657 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $10.84
$7.37
MSRP $10.84
$7.37
26
Suspension Sub-Frame Cross-Member Brace Audi
Audi Description: 4.0L. Gas. Diesel. This factory Audi Suspension Sub-Frame Cross-Member Brace (4H0-399-345-Q) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $250.00
$191.25
MSRP $250.00
$191.25
27
Suspension Cross-Member Bolt Audi
Audi Description: A7. S7. 4.0L. Gas. Diesel. This factory Audi Suspension Cross-Member Bolt (N-911-742-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $13.51
$9.21
MSRP $13.51
$9.21
28
Suspension Cross-Member Bolt Audi
Audi Description: 4.0L. Gas. Diesel. This genuine Audi Suspension Cross-Member Bolt, part number N-911-741-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.74
$6.62
MSRP $9.74
$6.62
29
Engine Mount Heat Shield Audi
Audi Positions: Right
Description: 4.0L. Gas. 3.0L diesel. Listed under Audi part number 4G0-399-300-B, this Engine Mount Heat Shield controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $43.78
$29.31
MSRP $43.78
$29.31
30
Engine Mount Heat Shield Audi
Audi Positions: Left
Description: 4.0L. Gas. 3.0L diesel. This factory Audi Engine Mount Heat Shield (4G0-399-299-B) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $43.78
$29.31
MSRP $43.78
$29.31