Splash Shields for 2016 Audi RS7
No.
Part # / Description / Price
Price
1
Radiator Support Splash Shield 
Audi
Audi Description: 4.0L, with RS7. This factory Audi Radiator Support Splash Shield (4G0-863-821-L) moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling capacity shows up as performance and economy loss before it shows as overheating. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
1
Radiator Support Splash Shield Audi
Audi Positions: Front rearward
Description: 3.0 Liter. 4.0 Liter. A6. Radiator Support Splash Shield. S6.
Fits A6, A7, A7 Sportback, RS7, RS7 Sportback, S6, S7, S7 Sportback
3.0 Liter. 4.0 Liter. A6. S6. A6. S6. 3.0L. 4.0L. The original equipment Audi Radiator Support Splash Shield supplied und ...
MSRP $578.33
$438.96
MSRP $578.33
$438.96
1
Radiator Support Splash Shield Audi
Audi Positions: Front right
Description: A6. 4.0L. S6. 3.0L. The original equipment Audi Radiator Support Splash Shield supplied under part number 4G0-863-190 moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of coolin ...
MSRP $51.38
$34.40
MSRP $51.38
$34.40
1
Radiator Support Splash Shield Audi
Audi Positions: Front left
Description: A6. 4.0L. S6. 3.0L. Audi part number 4G0-863-189, the factory Radiator Support Splash Shield, moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling capacity shows up as performance and economy loss before it shows as overheating. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $51.38
$34.40
MSRP $51.38
$34.40
2
Radiator Support Splash Shield Guide Pin Audi
Audi Description: Genuine Audi Radiator Support Splash Shield Guide Pin 8w0805121. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $5.20
$3.54
MSRP $5.20
$3.54
3
Radiator Support Splash Shield Bolt Audi
Audi Description: This factory Audi Radiator Support Splash Shield Bolt (N-911-407-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.36
$0.24
MSRP $0.36
$0.24
4
Radiator Support Splash Shield Screw Audi
Audi Description: A6. 4.0L. S6. The original equipment Audi Radiator Support Splash Shield Screw supplied under part number N-908-962-02 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $6.78
$4.61
MSRP $6.78
$4.61
5
Radiator Support Splash Shield Nut Audi
Audi Description: Listed under Audi part number 8K0-805-922-A, this Radiator Support Splash Shield Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
8
Radiator Support Splash Shield Washer Audi
Audi Notes: PARTS: Part included with under cover.
Description: A6. 4.0L. 2017-19. 2017-25. to 01/28/2019. S6. Coupe, 2.0L. Coupe, 3.0L. 4.2L, to vin 8t8044600. 3.2L, to vin 8t8044600. Audi part number WHT-002-227, the factory Radiator Support Splash Shield Washer, is a small but load bearing element of the assembly, ...
MSRP $5.65
$3.84
MSRP $5.65
$3.84
9
Quarter Panel Splash Shield Nut Audi
Audi Description: Listed under Audi part number N-909-591-01, this Quarter Panel Splash Shield Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.62
$2.46
MSRP $3.62
$2.46
10
Radiator Support Air Duct Audi
Audi Description: A6. 4.0L. S6. This factory Audi Radiator Support Air Duct (4G0-863-325-A) moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling capacity shows up as performance and economy loss before it shows as overheating. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $35.18
$24.01
MSRP $35.18
$24.01
11
Radiator Support Baffle Audi
Audi Positions: Right
Description: 4.0L, with RS7. The original equipment Audi Radiator Support Baffle supplied under part number 4G8-821-192-D moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling capacity shows up as performance and economy loss before it shows as overheating. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $301.65
$230.76
MSRP $301.65
$230.76
11
Radiator Support Baffle Audi
Audi Positions: Left
Description: 4.0L, with RS7. This genuine Audi Radiator Support Baffle, part number 4G8-821-191-D, moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling capacity shows up as performance and economy loss before it shows as overheating. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
12
Fender Liner Extension Clip Audi
Audi Positions: Right
Notes: PARTS: Part included with side air baffle.
Description: Genuine Audi Fender Liner Extension Clip 8K0-821-213-A. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
14
Radiator Support Splash Shield Grommet Audi
Audi Positions: Right
Description: Side air baffle,grommet. A6. 2017-25. 4.0L. S6. Ducts, vents, shields and components. This factory Audi Radiator Support Splash Shield Grommet (8K0-261-595) is a small but load bearing element of the assembly, and using the factory specification matters b ...
MSRP $5.13
$3.48
MSRP $5.13
$3.48