Control Cables for 2017 Audi S8
No.
Part # / Description / Price
Price
1
Hood Panel 
Audi
Audi Description: Hood Panel.
Fits A8, S7 Sportback, S8. Listed under Audi part number 4H0-823-029-H, this Hood Panel forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $2,488.81
$1,889.01
MSRP $2,488.81
$1,889.01
2
Hood Stop Buffer Audi
Audi Description: 4.2L. Genuine Audi Hood Stop Buffer 4E0-823-481. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.74
$6.62
MSRP $9.74
$6.62
4
Hood Seal Audi
Audi Positions: Right
Description: This factory Audi Hood Seal (4H0-823-721-B) creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $38.18
$26.06
MSRP $38.18
$26.06
4
Hood Seal Audi
Audi Positions: Front
Description: This genuine Audi Hood Seal, part number 4H0-823-126-H, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $62.48
$50.20
MSRP $62.48
$50.20
4
Hood Seal Audi
Audi Positions: Front
Description: This factory Audi Hood Seal (4H0-823-731-E) creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
4
Hood Seal Audi
Audi Positions: Front right
Description: This factory Audi Hood Seal (4H0-823-734-B) creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
5
Hood Hinge Audi
Audi Positions: Left
Description: Audi part number 4H0-823-301-L, the factory Hood Hinge, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $251.67
$192.53
MSRP $251.67
$192.53
5
Hood Hinge Audi
Audi Positions: Right
Description: This factory Audi Hood Hinge (4H0-823-302-L) manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $240.01
$183.60
MSRP $240.01
$183.60
6
Hinge Nut Audi
Audi Positions: Left
Description: From 10/05/2020. 2017-25. Sportback. Convertible,. Coupe,. Lid & components. Audi part number N-905-115-08, the factory Hinge Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $6.06
$4.12
MSRP $6.06
$4.12
7
Hood Hinge Bolt Audi
Audi Positions: Left
Description: With TT rs. This factory Audi Hood Hinge Bolt (N-908-623-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $7.18
$4.88
MSRP $7.18
$4.88
8
Hood Hinge Cover Audi
Audi Positions: Right
Description: Genuine Audi Hood Hinge Cover 4H0-823-316-C. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $18.86
$12.82
MSRP $18.86
$12.82
8
Hood Hinge Cover Audi
Audi Positions: Left
Description: Listed under Audi part number 4H0-823-315-C, this Hood Hinge Cover manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $26.18
$17.87
MSRP $26.18
$17.87
9
Hood Lift Support Audi
Audi Positions: Right
Description: A8, S8. The original equipment Audi Hood Lift Support supplied under part number 4H0-823-359-D forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $125.01
$87.30
MSRP $125.01
$87.30
10
Hood Lift Support Stud Audi
Audi Positions: Left
Description: This factory Audi Hood Lift Support Stud (4H0-823-186-E) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $134.82
$102.33
MSRP $134.82
$102.33
11
Convertible Top Mounting Plate Bolt Audi
Audi Positions: Right
Description: Seat cushion, contour seat, m6x12. 2006-10. Convertible,. Cushion components, passenger side 2017-19. 2004-05 with 4.2L. 2005 with 6.0L. The original equipment Audi Convertible Top Mounting Plate Bolt supplied under part number N-907-371-05 is a small but ...
MSRP $2.06
$1.40
MSRP $2.06
$1.40
12
Hood Safety Catch Audi
Audi Description: Listed under Audi part number 4H0-823-485-D, this Hood Safety Catch forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
15
Hood Latch Audi
Audi Positions: Right
Description: A8, S8. This genuine Audi Hood Latch, part number 4H0-823-509-D, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $240.13
$214.31
MSRP $240.13
$214.31
16
Hood Contact Switch Audi
Audi Positions: Right
Description: A6, S6. Micro switch. A8, S8. The original equipment Audi Hood Contact Switch supplied under part number 4H0-953-236 presents vehicle information to the driver or accepts driver input, so its display, backlighting, and switch contacts are the interface between the operator and the vehicle's electronics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $111.16
$84.36
MSRP $111.16
$84.36
17
Drive Motor Battery Pack Charging Port Assembly Bracket Audi
Audi Description: Rear camera,retainer brkt. 2017-25. Convertible,. High voltage charging socket. Coupe,. Camera system. This genuine Audi Drive Motor Battery Pack Charging Port Assembly Bracket, part number 3B0-919-136-A, is a small but load bearing element of the assembl ...
MSRP $9.32
$7.60
MSRP $9.32
$7.60
18
Hood Latch Bracket Audi
Audi Positions: Left
Description: Audi part number 4H0-823-425-B, the factory Hood Latch Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $22.10
$15.08
MSRP $22.10
$15.08
18
Hood Latch Bracket Audi
Audi Positions: Right
Description: This genuine Audi Hood Latch Bracket, part number 4H0-823-426-B, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $50.48
$40.56
MSRP $50.48
$40.56
19
Hood Latch Cover Audi
Audi Positions: Left
Description: Convertible,. Sedan. Wagon. The original equipment Audi Hood Latch Cover supplied under part number 4H0-823-188 manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
20
Hood Release Cable Audi
Audi Description: A8, S8. Front. The original equipment Audi Hood Release Cable supplied under part number 4H0-823-531-D carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $60.32
$48.46
MSRP $60.32
$48.46
21
Hood Release Cable Clip Audi
Audi Description: Lock cable,clip. Washer hose,holder. Release cable,clip. Diesel, reducing fluid tank & sensors. With TT rs. 3.0L diesel, emission reduction system. Audi part number 1H0-971-939-C, the factory Hood Release Cable Clip, is a small but load bearing element of ...
MSRP $2.69
$2.20
MSRP $2.69
$2.20
22
Hood Release Cable Clip Audi
Audi Description: Convertible,. Sedan. 2017-21. Lock and cables. Wagon. Coupe,. The original equipment Audi Hood Release Cable Clip supplied under part number 4H0-823-543 is a small but load bearing element of the assembly, and using the factory specification matters becau ...
MSRP $11.50
$7.82
MSRP $11.50
$7.82
23
Hood Release Cable Audi
Audi Description: Genuine Audi Hood Release Cable 4H0-823-535. This original equipment component carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $90.97
$69.06
MSRP $90.97
$69.06
24
Hood Release Cable Clip Audi
Audi Description: Listed under Audi part number 4H0-823-567, this Hood Release Cable Clip is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
25
Hood Release Handle Audi
Audi Description: A8, S8. Rear. Audi part number 4H1-823-633-D, the factory Hood Release Handle, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $81.16
$65.20
MSRP $81.16
$65.20
26
Hood Release Handle Audi
Audi Description: Silver. This genuine Audi Hood Release Handle, part number 4H1-823-533-ET1, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
26
Hood Release Handle Audi
Audi Description: Brown. The original equipment Audi Hood Release Handle supplied under part number 4H1-823-533-DF3 manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
26
Hood Release Handle Audi
Audi Description: Black. Genuine Audi Hood Release Handle 4H1-823-533-6PS. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $94.49
$71.71
MSRP $94.49
$71.71
26
Hood Release Handle Audi
Audi Description: Gray. This factory Audi Hood Release Handle (4H1-823-533-BC5) manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
26
Hood Release Handle Audi
Audi Description: Satin beige. Genuine Audi Hood Release Handle 4H1-823-533-BH9. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
28
Hood Seal Audi
Audi Positions: Left
Description: Audi part number 4H0-823-733-B, the factory Hood Seal, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
29
Cowl Extension Audi
Audi Positions: Right
Description: The original equipment Audi Cowl Extension supplied under part number 4H0-823-746-C carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $26.18
$17.87
MSRP $26.18
$17.87
29
Cowl Extension Audi
Audi Positions: Left
Description: Listed under Audi part number 4H0-823-745-C, this Cowl Extension carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.58
$6.51
MSRP $9.58
$6.51
30
Hood Hinge Cover Audi
Audi Description: This factory Audi Hood Hinge Cover (4H1-805-806) manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $21.78
$14.86
MSRP $21.78
$14.86
31
Hood Insulation Pad Audi
Audi Description: This factory Audi Hood Insulation Pad (4H0-863-825-B) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $326.67
$249.90
MSRP $326.67
$249.90
32
Hood Insulation Pad Clip Audi
Audi Notes: PARTS: Part included with insulator.
Description: Convertible,. 2017-21. Sedan, sedan. 2013-2016. Hood & hardware. Wagon. This factory Audi Hood Insulation Pad Clip (8E0-863-727-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $2.44
$1.66
MSRP $2.44
$1.66