Shop Parts & Accessories

Shop Aftermarket

Shop Clearance

Tire AutoNation Parts

Tires, wheels, and more.

We can get you there

Categories

Browse Categories

Control Modules for 2019 Audi SQ5

Control Modules for 2019 Audi SQ5 #0
No.
Part # / Description / Price
Price
1
Direct Ignition Coil
Audi Audi
Description: To 02/26/2018. From 06/04/2015. To 03/14/2018. To 01/29/2018. To 03/25/2018. Genuine Audi Direct Ignition Coil 06H-905-110-P. This original equipment component initiates combustion at a precisely controlled moment, and because ignition energy demand rises ...
MSRP $104.98
$79.37
MSRP $104.98
$79.37
2
Direct Ignition Coil Boot
Audi Audi
Notes: PARTS: Part included with spark plug.
Description: Genuine Audi Direct Ignition Coil Boot 06H-905-199-C. This original equipment component creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $48.32
$38.82
MSRP $48.32
$38.82
3
Spark Plug
Audi Audi
Description: 2.9L. Convertible, 3.0L.
Spark Plug.
5
Oil Cooler Bolt
Audi Audi
Description: Genuine Audi Oil Cooler Bolt N-101-961-03. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.94
$2.68
MSRP $3.94
$2.68
6
Engine Crankshaft Position Sensor
Audi Audi
Description: The original equipment Audi Engine Crankshaft Position Sensor supplied under part number 057-906-433-C operates inside the engine's rotating and sealing envelope, where clearances measured in hundredths of a millimeter decide oil control, compression sealing, and long term durability. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $60.65
$48.73
MSRP $60.65
$48.73
7
Engine Oil Pan Bolt
Audi Audi
Description: 3.0L, to 04/01/2024. 2020-24 3.0L. 2.9L, to 04/01/2022. Convertible, 3.0L. This genuine Audi Engine Oil Pan Bolt, part number N-911-687-02, is a small but load bearing element of the assembly, and using the factory specification matters because thread pit ...
MSRP $0.70
$0.48
MSRP $0.70
$0.48
8
Ignition Knock (Detonation) Sensor
Audi Audi
Description:
Ignition Knock (Detonation) Sensor.
9
Ignition Knock (Detonation) Sensor Bolt
Audi Audi
Description: 3.0L, gas. 3.2L. Coupe, 3.0L. Audi part number N-106-886-01, the factory Ignition Knock (Detonation) Sensor Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $4.10
$2.79
MSRP $4.10
$2.79
10
Engine Control Module
Audi Audi
Notes: PARTS: Order by application.
Description: SQ5. 3.0L. This factory Audi Engine Control Module (80A-907-559-D-FY0) executes the control strategy for its subsystem, and because Audi modules are networked and component protected, a replacement is a software event as much as a hardware one. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1,528.29
$1,353.30
MSRP $1,528.29
$1,353.30
10
Engine Control Module
Audi Audi
Description: S4. Engine code cwdg. 3.0L, 2.9L, 3.0L. Audi part number 8W0-907-559-L-8WF, the factory Engine Control Module, executes the control strategy for its subsystem, and because Audi modules are networked and component protected, a replacement is a software event as much as a hardware one. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2,808.31
$2,486.76
MSRP $2,808.31
$2,486.76
11
Engine Control Module Bracket
Audi Audi
Description: 3.0L. The original equipment Audi Engine Control Module Bracket supplied under part number 80A-907-648-A is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $85.00
$64.52
MSRP $85.00
$64.52