Fender & Components for 2022 Audi e-tron Sportback
No.
Part # / Description / Price
Price
1
Fender 
Audi
Audi Positions: Left
Notes: PARTS: Part has related component that cannot be reused/reinstalled; wheel opening molding.
Description: Fender. The original equipment Audi Fender supplied under part number 4KE-821-021-C forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1,373.33
$1,042.36
MSRP $1,373.33
$1,042.36
1
Fender Audi
Audi Positions: Right
Notes: PARTS: Part has related component that cannot be reused/ reinstalled; wheel opening molding.
Description: Fender. This factory Audi Fender (4KE-821-022-C) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $1,373.33
$1,042.36
MSRP $1,373.33
$1,042.36
2
Fender Bolt Audi
Audi Positions: Left
Description: End support,mount bolt. Fender. 2017-25, m6x14. Convertible,. Coupe,. RS5. This genuine Audi Fender Bolt, part number N-911-869-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1.00
$0.68
MSRP $1.00
$0.68
3
Fender Stud Audi
Audi Positions: Left
Description: 2017-21. Fender. Convertible,. Coupe,. The original equipment Audi Fender Stud supplied under part number N-912-440-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $25.24
$17.23
MSRP $25.24
$17.23
4
Fender Hardware Kit Audi
Audi Positions: Left
Description: Fender. This genuine Audi Fender Hardware Kit, part number 4KE-098-625, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $175.00
$133.88
MSRP $175.00
$133.88
5
Fender Bracket Audi
Audi Positions: Left
Description: Fender. Audi part number 4KE-821-165, the factory Fender Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $11.79
$8.01
MSRP $11.79
$8.01
7
Fender Bracket Audi
Audi Positions: Left
Description: Fender. This factory Audi Fender Bracket (4KE-821-469) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $15.89
$10.80
MSRP $15.89
$10.80
7
Fender Bracket Audi
Audi Positions: Right
Description: Fender. Listed under Audi part number 4KE-821-470, this Fender Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $33.38
$22.78
MSRP $33.38
$22.78
9
Fender Bracket Audi
Audi Positions: Left
Description: Fender. Listed under Audi part number 4KE-821-471, this Fender Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $33.38
$22.78
MSRP $33.38
$22.78
11
Fender Closing Plate Audi
Audi Positions: Left
Description: Fender. The original equipment Audi Fender Closing Plate supplied under part number 4KE-821-111 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $58.48
$46.99
MSRP $58.48
$46.99
11
Fender Closing Plate Audi
Audi Positions: Right
Description: Fender. Genuine Audi Fender Closing Plate 4KE-821-112. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $60.32
$48.46
MSRP $60.32
$48.46
12
End Plate Rivet Audi
Audi Positions: Left
Description: The original equipment Audi End Plate Rivet supplied under part number N-105-835-01-9B9 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.38
$2.30
MSRP $3.38
$2.30
13
Fender Bracket Audi
Audi Positions: Left
Description: Fender. This factory Audi Fender Bracket (4KE-821-149) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $87.15
$66.15
MSRP $87.15
$66.15
13
Fender Bracket Audi
Audi Positions: Right
Description: Fender. Genuine Audi Fender Bracket 4KE-821-150. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $92.82
$70.45
MSRP $92.82
$70.45
15
Fender Reinforcement Bar Audi
Audi Positions: Left
Description: Fender. Genuine Audi Fender Reinforcement Bar 4KE-810-055-B. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $67.82
$54.48
MSRP $67.82
$54.48
15
Fender Reinforcement Bar Audi
Audi Positions: Right
Description: Fender. Listed under Audi part number 4KE-810-056-B, this Fender Reinforcement Bar forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $67.82
$54.48
MSRP $67.82
$54.48
16
Side Shield Bolt Audi
Audi Positions: Left
Description: The original equipment Audi Side Shield Bolt supplied under part number N-106-532-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.72
$1.85
MSRP $2.72
$1.85
17
Window Regulator Nut Audi
Audi Positions: Left
Description: Listed under Audi part number N-015-082-10, this Window Regulator Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
18
Fender Reinforcement Bar Bracket Audi
Audi Positions: Left
Description: Fender. The original equipment Audi Fender Reinforcement Bar Bracket supplied under part number 4KE-821-163 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $17.15
$11.66
MSRP $17.15
$11.66
18
Fender Reinforcement Bar Bracket Audi
Audi Positions: Right
Description: Fender. Genuine Audi Fender Reinforcement Bar Bracket 4KE-821-164. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $17.15
$11.66
MSRP $17.15
$11.66
19
Bumper Cover Spacer Panel Bolt Audi
Audi Positions: Left
Description: Genuine Audi Bumper Cover Spacer Panel Bolt N-911-405-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $5.24
$3.56
MSRP $5.24
$3.56
20
Fender Splash Shield Audi
Audi Positions: Left
Description: Fender, 08/12/19-01/11/2021. This factory Audi Fender Splash Shield (4KE-821-171-C) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $255.00
$195.08
MSRP $255.00
$195.08
20
Fender Splash Shield Audi
Audi Positions: Right
Description: Fender, 08/12/19-01/11/2021. Fender, to 08/12/2019. Audi part number 4KE-821-172-C, the factory Fender Splash Shield, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $255.00
$195.08
MSRP $255.00
$195.08
21
Radiator Support Splash Shield Nut Audi
Audi Positions: Left
Notes: PARTS: Part included with fender liner.
Description: Audi part number WHT-005-296, the factory Radiator Support Splash Shield Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $4.61
$3.14
MSRP $4.61
$3.14
22
Quarter Panel Splash Shield Nut Audi
Audi Positions: Left
Description: Listed under Audi part number N-909-591-01, this Quarter Panel Splash Shield Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.62
$2.46
MSRP $3.62
$2.46
23
Fender Liner Screw Audi
Audi Positions: Left
Description: Audi part number N-910-570-01, the factory Fender Liner Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.59
$2.43
MSRP $3.59
$2.43
24
Radiator Support Splash Shield Rivet Audi
Audi Positions: Left
Description: Listed under Audi part number WHT-004-750, this Radiator Support Splash Shield Rivet is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1.40
$0.95
MSRP $1.40
$0.95
25
Fender Liner Nut Audi
Audi Positions: Left
Description: This factory Audi Fender Liner Nut (WHT-008-489) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.61
$3.14
MSRP $4.61
$3.14
26
Fender Liner Extension Audi
Audi Positions: Left
Description: Fender, to 07/13/2020. Fender, from 07/13/2020. Genuine Audi Fender Liner Extension 4KE-853-887-D. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $111.99
$85.00
MSRP $111.99
$85.00
26
Fender Liner Extension Audi
Audi Positions: Right
Description: Fender, to 07/13/2020. Fender, from 07/13/2020. Genuine Audi Fender Liner Extension 4KE-853-888-E. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $111.99
$85.00
MSRP $111.99
$85.00
29
Radiator Support Splash Shield Bolt Audi
Audi Positions: Left
Description: This factory Audi Radiator Support Splash Shield Bolt (N-912-516-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $4.46
$3.03
MSRP $4.46
$3.03
30
Body A-Pillar Trim Panel Screw Audi
Audi Positions: Left
Description: This factory Audi Body A-Pillar Trim Panel Screw (WHT-003-841) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $5.15
$3.51
MSRP $5.15
$3.51
32
Brake Air Duct Audi
Audi Positions: Left
Description: Fender. Audi part number 4KE-121-733, the factory Brake Air Duct, carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $59.18
$39.62
MSRP $59.18
$39.62
32
Brake Air Duct Audi
Audi Positions: Right
Description: Fender. This factory Audi Brake Air Duct (4KE-121-734) carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $57.18
$38.28
MSRP $57.18
$38.28
32
Brake Air Duct Audi
Audi Positions: Front right
Description: Cover & components, sportback. This factory Audi Brake Air Duct (4KE-121-736-C-Y9B) carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.