Ride Control for 2022 Audi RS e-tron GT
No.
Part # / Description / Price
Price
N/A
Active Suspension Control Module 
Audi
Audi Description: A8 Quattro. E-tron Quattro. E-tron Sportback. A6 allroad. S6. S7. S8. SQ5 Sportback. RS6 avant. Audi part number 4M0-907-778, the factory Active Suspension Control Module, executes the control strategy for its subsystem, and because Audi modules are netwo ...
MSRP $319.70
$241.69
MSRP $319.70
$241.69
N/A
Suspension Ride Height Sensor Audi
Audi Description: The original equipment Audi Suspension Ride Height Sensor supplied under part number 9J1-616-572-B controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $286.65
$219.29
MSRP $286.65
$219.29
N/A
Suspension Ride Height Sensor Audi
Audi Description: Listed under Audi part number 9J1-616-571-B, this Suspension Ride Height Sensor controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $297.82
$227.83
MSRP $297.82
$227.83
N/A
Suspension Self-Leveling Unit Accumulator Audi
Audi Description: This factory Audi Suspension Self-Leveling Unit Accumulator (9J1-616-202-A) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $468.99
$355.96
MSRP $468.99
$355.96
N/A
Suspension Self-Leveling Valve Audi
Audi Description: The original equipment Audi Suspension Self-Leveling Valve supplied under part number 971-616-056-C controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $415.88
$318.15
MSRP $415.88
$318.15
N/A
Air Suspension Compressor Audi
Audi Description: This genuine Audi Air Suspension Compressor, part number 9J1-616-006-D, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
1
Suspension Control Arm Bushing Audi
Audi Description: Genuine Audi Suspension Control Arm Bushing 971-505-544. This original equipment component controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
2
Suspension Control Arm Audi
Audi Description: Audi part number 9J1-505-311-A, the factory Suspension Control Arm, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
2
Suspension Control Arm Audi
Audi Description: Listed under Audi part number 9J1-505-312-A, this Suspension Control Arm controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $687.15
$521.55
MSRP $687.15
$521.55
3
Cross-Member Audi
Audi Description: RS e-tron GT. Genuine Audi Cross-Member 9J1-599-030-K. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
5
Air Spring 2 Audi
Audi Description: 2022-2024. Left. RS e-tron GT. This factory Audi Air Spring (9J1-616-025-D) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $955.46
$785.63
MSRP $955.46
$785.63
5
Air Suspension Spring Audi
Audi Description: Listed under Audi part number 9J1-616-026-D, this Air Suspension Spring controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
6
Suspension Stabilizer Bar Bracket Audi
Audi Description: Listed under Audi part number 9P1-511-418-A, this Suspension Stabilizer Bar Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $24.78
$16.91
MSRP $24.78
$16.91
7
Suspension Stabilizer Bar Bushing Audi
Audi Description: Listed under Audi part number 992-511-035-A, this Suspension Stabilizer Bar Bushing controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $19.42
$13.21
MSRP $19.42
$13.21
8
Suspension Stabilizer Bar Link Audi
Audi Description: Genuine Audi Suspension Stabilizer Bar Link 971-511-467-F. This original equipment component controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $98.31
$74.62
MSRP $98.31
$74.62
9
Suspension Stabilizer Bar Audi
Audi Description: Listed under Audi part number 9J1-511-025-Y, this Suspension Stabilizer Bar controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $249.49
$190.85
MSRP $249.49
$190.85
12
Shock Absorber Bellows Audi
Audi Description: The original equipment Audi Shock Absorber Bellows supplied under part number 971-512-137 creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $18.00
$12.24
MSRP $18.00
$12.24
13
Steering Knuckle Audi
Audi Description: The original equipment Audi Steering Knuckle supplied under part number 971-505-435-J transmits driver input to the road wheels, where free play, friction, and mounting rigidity determine both steering precision and the vehicle's ability to hold a straight line. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $991.67
$815.41
MSRP $991.67
$815.41
13
Steering Knuckle Audi
Audi Description: Listed under Audi part number 971-505-436-J, this Steering Knuckle transmits driver input to the road wheels, where free play, friction, and mounting rigidity determine both steering precision and the vehicle's ability to hold a straight line. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $823.69
$677.28
MSRP $823.69
$677.28
14
Hub Audi
Audi Description: Audi part number 971-407-615-C, the factory Hub, is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $481.66
$365.59
MSRP $481.66
$365.59
15
CV Axle Retainer Plate Audi
Audi Description: Listed under Audi part number 971-501-375-A, this CV Axle Retainer Plate is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $9.42
$6.41
MSRP $9.42
$6.41
16
Bearing Audi
Audi Description: 360x36 mm. 365x28 mm. S e-tron GT. RS e-tron GT Performance. This factory Audi Bearing (971-501-287-D) is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $237.47
$181.66
MSRP $237.47
$181.66
17
Shock Absorber 2 Audi
Audi Description: The original equipment Audi Shock Absorber supplied under part number 9J1-513-035-E controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $801.65
$608.45
MSRP $801.65
$608.45
18
Shock Mount Audi
Audi Description: Genuine Audi Shock Mount 9J1-513-353. This original equipment component controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
19
Coil Spring Retainer Audi
Audi Description: Listed under Audi part number 971-412-149, this Coil Spring Retainer is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $29.58
$20.19
MSRP $29.58
$20.19
20
Lateral Arm Audi
Audi Description: Genuine Audi Lateral Arm 9J1-501-529. This original equipment component is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
21
Suspension Control Arm Audi
Audi Description: Audi part number 971-505-397-A, the factory Suspension Control Arm, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $257.65
$197.10
MSRP $257.65
$197.10
21
Suspension Control Arm Audi
Audi Description: The original equipment Audi Suspension Control Arm supplied under part number 971-505-398-A controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $257.65
$197.10
MSRP $257.65
$197.10
22
Suspension Control Arm Audi
Audi Description: This genuine Audi Suspension Control Arm, part number 971-505-323-B, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $256.66
$196.35
MSRP $256.66
$196.35
2 This part contains hazardous materials. Extra shipping costs apply.