Fender & Components for 2023 Audi e-tron GT
No.
Part # / Description / Price
Price
1
Fender 
Audi
Audi Positions: Left
Description: Audi part number 4J3-821-103-A, the factory Fender, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $2,304.97
$1,749.48
MSRP $2,304.97
$1,749.48
1
Fender Audi
Audi Positions: Right
Description: The original equipment Audi Fender supplied under part number 4J3-821-104-A forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $2,980.99
$2,262.57
MSRP $2,980.99
$2,262.57
2
Stone Guard Audi
Audi Positions: Right
Description: This factory Audi Stone Guard (4J3-853-824) finishes and protects an exterior surface, and while the function is partly cosmetic, these components also manage airflow, shield against debris, and seal transitions between panels. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $45.18
$30.25
MSRP $45.18
$30.25
2
Stone Guard Audi
Audi Positions: Left
Description: Listed under Audi part number 4J3-853-823, this Stone Guard finishes and protects an exterior surface, and while the function is partly cosmetic, these components also manage airflow, shield against debris, and seal transitions between panels. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $45.18
$30.25
MSRP $45.18
$30.25
3
Stone Guard Bracket Audi
Audi Positions: Left
Description: Genuine Audi Stone Guard Bracket 4J3-821-101. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $129.49
$98.28
MSRP $129.49
$98.28
3
Stone Guard Bracket Audi
Audi Positions: Right
Description: Audi part number 4J3-821-102, the factory Stone Guard Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
4
Fender Brace Audi
Audi Positions: Right
Description: The original equipment Audi Fender Brace supplied under part number 4J3-821-240-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $79.48
$63.86
MSRP $79.48
$63.86
4
Fender Brace Audi
Audi Positions: Left
Description: The original equipment Audi Fender Brace supplied under part number 4J3-821-239-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $79.48
$63.86
MSRP $79.48
$63.86
5
Fender Bracket Audi
Audi Positions: Right
Description: Listed under Audi part number 4J3-821-166, this Fender Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $35.78
$24.42
MSRP $35.78
$24.42
5
Fender Bracket Audi
Audi Positions: Left
Description: This genuine Audi Fender Bracket, part number 4J3-821-165, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $35.78
$24.42
MSRP $35.78
$24.42
6
Fender Brace Audi
Audi Positions: Right
Description: Audi part number 4J3-821-162, the factory Fender Brace, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $35.78
$24.42
MSRP $35.78
$24.42
6
Fender Brace Audi
Audi Positions: Left
Description: This factory Audi Fender Brace (4J3-821-161) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $35.78
$24.42
MSRP $35.78
$24.42
7
Fender Bracket Audi
Audi Positions: Left
Description: Listed under Audi part number 4J3-821-433-A, this Fender Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $41.98
$28.11
MSRP $41.98
$28.11
7
Fender Bracket Audi
Audi Positions: Right
Description: This genuine Audi Fender Bracket, part number 4J3-821-434-A, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $41.98
$28.11
MSRP $41.98
$28.11
8
Brake Air Duct Audi
Audi Positions: Left
Description: Audi part number 4J3-809-963, the factory Brake Air Duct, carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $111.67
$84.76
MSRP $111.67
$84.76
8
Brake Air Duct Audi
Audi Positions: Right
Description: This genuine Audi Brake Air Duct, part number 4J3-809-964, carries and controls hydraulic pressure in the brake circuit, where sealing integrity and consistent piston travel are what turn pedal effort into clamping force. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
9
Fender Closing Plate Audi
Audi Positions: Right
Description: This factory Audi Fender Closing Plate (4J3-854-778-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $60.82
$48.86
MSRP $60.82
$48.86
9
Fender Closing Plate Audi
Audi Positions: Left
Description: Genuine Audi Fender Closing Plate 4J3-854-777-A. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $68.31
$54.89
MSRP $68.31
$54.89
10
Fender Splash Shield Audi
Audi Positions: Right
Description: Listed under Audi part number 4J3-810-908-D, this Fender Splash Shield forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $278.34
$212.93
MSRP $278.34
$212.93
10
Fender Splash Shield Audi
Audi Positions: Left
Description: Genuine Audi Fender Splash Shield 4J3-810-907-D. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $278.34
$212.93
MSRP $278.34
$212.93
11
Fender Liner Extension Audi
Audi Positions: Right
Description: Audi part number 9J1-809-958-D, the factory Fender Liner Extension, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $122.48
$92.96
MSRP $122.48
$92.96
11
Fender Liner Extension Audi
Audi Positions: Left
Description: This genuine Audi Fender Liner Extension, part number 9J1-809-957-D, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $122.48
$92.96
MSRP $122.48
$92.96
12
Fender Liner Extension Bracket Audi
Audi Positions: Right
Description: Genuine Audi Fender Liner Extension Bracket 9J1-805-374-Y. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $325.00
$248.63
MSRP $325.00
$248.63
12
Fender Liner Extension Bracket Audi
Audi Positions: Left
Description: Listed under Audi part number 9J1-805-373-Y, this Fender Liner Extension Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $325.00
$248.63
MSRP $325.00
$248.63