Structural Components & Rails for 2023 Audi RS3
No.
Part # / Description / Price
Price
1
Frame Side Member Reinforcement 
Audi
Audi Description: Audi part number 5Q0-803-108-A, the factory Frame Side Member Reinforcement, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $175.78
$134.47
MSRP $175.78
$134.47
2
Frame Side Member Reinforcement Bracket Audi
Audi Description: Right side. Convertible,. This genuine Audi Frame Side Member Reinforcement Bracket, part number 5Q0-805-758, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $17.68
$12.02
MSRP $17.68
$12.02
3
Frame Side Member Audi
Audi Description: Genuine Audi Frame Side Member 5Q0-803-106-B. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
4
Frame Side Member Bracket Audi
Audi Description: The original equipment Audi Frame Side Member Bracket supplied under part number 3Q0-803-298 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $26.18
$17.87
MSRP $26.18
$17.87
5
Frame Side Member Bracket Audi
Audi Description: Listed under Audi part number 5QE-803-646-A, this Frame Side Member Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $26.18
$17.87
MSRP $26.18
$17.87
6
Frame Rail End Audi
Audi Description: Convertible,. Sedan,. The original equipment Audi Frame Rail End supplied under part number 5Q0-804-182-B carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $70.32
$56.49
MSRP $70.32
$56.49
7
Frame Side Member Bracket Audi
Audi Description: Right side. Convertible,. Sedan,. The original equipment Audi Frame Side Member Bracket supplied under part number 5Q0-802-068 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, ...
MSRP $128.32
$97.39
MSRP $128.32
$97.39
8
Frame Side Member Reinforcement Audi
Audi Description: Right side. Convertible,. Sedan,. Listed under Audi part number 5Q0-803-128, this Frame Side Member Reinforcement carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $56.82
$45.65
MSRP $56.82
$45.65
9
Floor Side Rail Reinforcement Audi
Audi Description: Right side. Convertible,. This factory Audi Floor Side Rail Reinforcement (5Q0-804-426) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $55.78
$37.34
MSRP $55.78
$37.34
10
Floor Side Rail Bracket Audi
Audi Description: Right side. Convertible,. Sedan,. The original equipment Audi Floor Side Rail Bracket supplied under part number 5Q0-803-210 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $199.99
$152.99
MSRP $199.99
$152.99
11
Floor Side Rail Audi
Audi Description: Sedan/wagon,. This genuine Audi Floor Side Rail, part number 5Q0-804-456, is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $129.99
$98.66
MSRP $129.99
$98.66
12
Fender Apron Assembly Audi
Audi Description: Audi part number 5WA-805-116, the factory Fender Apron Assembly, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $678.82
$515.22
MSRP $678.82
$515.22
13
Fender Apron Bracket Audi
Audi Description: This genuine Audi Fender Apron Bracket, part number 5Q0-823-402-B, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $52.38
$35.07
MSRP $52.38
$35.07
14
Fender Apron Bracket Audi
Audi Notes: PARTS: Part included with apron assembly.
Description: This factory Audi Fender Apron Bracket (5Q0-121-409-B) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $21.99
$15.00
MSRP $21.99
$15.00
15
Fender Apron Reinforcement Audi
Audi Notes: PARTS: Part included with apron assembly.
Description: This genuine Audi Fender Apron Reinforcement, part number 5WA-805-078, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $18.38
$12.50
MSRP $18.38
$12.50
16
Fender Apron Bracket Audi
Audi Notes: PARTS: Part included with apron assembly.
Description: The original equipment Audi Fender Apron Bracket supplied under part number 5WA-810-812-A is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $34.38
$23.46
MSRP $34.38
$23.46
17
Fender Apron Audi
Audi Notes: PARTS: Part included with apron assembly.
Description: This genuine Audi Fender Apron, part number 5Q0-809-122-B, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $148.32
$112.57
MSRP $148.32
$112.57
18
Cowl Water Deflector Audi
Audi Notes: PARTS: Part included with apron assembly.
Description: This genuine Audi Cowl Water Deflector, part number 8Y0-806-239, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
19
Suspension Strut Tower Bracket Audi
Audi Description: This genuine Audi Suspension Strut Tower Bracket, part number 8Y0-805-234, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $17.48
$11.89
MSRP $17.48
$11.89
20
Fender Rail Audi
Audi Description: The original equipment Audi Fender Rail supplied under part number 8Y0-810-136 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $148.34
$112.59
MSRP $148.34
$112.59
21
End Plate Audi
Audi Notes: PARTS: Part included with side support.
Description: Right side. This factory Audi End Plate (8Y0-805-030) is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $129.49
$98.28
MSRP $129.49
$98.28