Engine & Trans Mounting for 2023 Audi S4
No.
Part # / Description / Price
Price
1
Engine Mount 
Audi
Audi Positions: Right
Description: S5. Right. S4. RS5. Convertible, 3.0L. SQ5 Sportback. 2.9L. Listed under Audi part number 4M0-199-372-GM, this Engine Mount controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $340.00
$244.80
MSRP $340.00
$244.80
2
Mount Audi
Audi Positions: Left
Description: S5. Left. S4. SQ5 Sportback. RS5. Convertible, 3.0L. 2.9L. Listed under Audi part number 4M0-199-371-GM, this Mount is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $341.66
$258.30
MSRP $341.66
$258.30
3
Motor Mount Mount Bolt Audi
Audi Positions: Right
Description: Listed under Audi part number N-906-967-02, this Motor Mount Mount Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
4
Engine Mount Support Bracket Bolt Audi
Audi Positions: Right
Description: Audi part number N-912-750-01, the factory Engine Mount Support Bracket Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $10.25
$6.98
MSRP $10.25
$6.98
4
Engine Mount Bolt Audi
Audi Description: Listed under Audi part number N-912-467-01, this Engine Mount Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $4.61
$3.14
MSRP $4.61
$3.14
6
Engine Mount Support Bracket Audi
Audi Positions: Right
Description: Retainer plate. 2020-24. 3.0L plug-in hybrid, without plug-in hybrid. Coupe, 3.0L. Convertible, 3.0L. This factory Audi Engine Mount Support Bracket (8W0-199-308-S) is a small but load bearing element of the assembly, and using the factory specification m ...
MSRP $233.32
$178.49
MSRP $233.32
$178.49
7
Engine Mount Support Bracket Audi
Audi Positions: Left
Description: Retainer plate. 2.9L. Support. 2020-24. 3.0L plug-in hybrid, without plug-in hybrid. Coupe, 3.0L. Convertible, 3.0L. Listed under Audi part number 8W0-199-307-S, this Engine Mount Support Bracket is a small but load bearing element of the assembly, and us ...
8
Support Bolt Audi
Audi Positions: Right
Description: The original equipment Audi Support Bolt supplied under part number N-107-026-03 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1.15
$0.79
MSRP $1.15
$0.79
9
Engine Mount Support Bracket Bolt Audi
Audi Positions: Right
Description: Without 2.0L hybrid, 3.0L, gas. Support,screw. 2.9L. 3.2L. Coupe, 3.0L, m8x35. Convertible, 3.0L, m8x35. This factory Audi Engine Mount Support Bracket Bolt (N-910-266-02) is a small but load bearing element of the assembly, and using the factory specific ...
MSRP $1.94
$1.32
MSRP $1.94
$1.32
10
Transmission Crossmember Audi
Audi Description: 3.0L, from 09/28/2020. Convertible, 3.0L. Coupe, 3.0L, to 09/28/2020. 2.9L. Listed under Audi part number 8W0-399-262-AR, this Transmission Crossmember manages torque delivery between the engine and the driveline, where hydraulic pressure control, clutch ...
MSRP $598.98
$454.63
MSRP $598.98
$454.63
11
Transmission Cross-Member Bolt Audi
Audi Description: Audi part number N-912-097-01, the factory Transmission Cross-Member Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1.48
$1.01
MSRP $1.48
$1.01
12
Automatic Transmission Mount Bracket Audi
Audi Description: This factory Audi Automatic Transmission Mount Bracket (8W0-399-156-BH) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $148.33
$112.59
MSRP $148.33
$112.59
13
Automatic Transmission Mount Nut Audi
Audi Description: Audi part number N-911-574-01, the factory Automatic Transmission Mount Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
14
Automatic Transmission Mount Brace Audi
Audi Description: 2017-25, from 04/15/2019. 2.0L. from 02/22/2021. 3.0L plug-in hybrid. 4.0L, rsq8. Convertible, 3.0L. 2.9L. Coupe, 2.0L, auto transmission, from 04/15/2019. The original equipment Audi Automatic Transmission Mount Brace supplied under part number 8W0-399-2 ...
MSRP $19.48
$13.25
MSRP $19.48
$13.25
15
Automatic Transmission Mount Bolt Audi
Audi Description: This factory Audi Automatic Transmission Mount Bolt (N-107-247-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $5.15
$3.51
MSRP $5.15
$3.51
16
Automatic Transmission Mount Bracket Audi
Audi Description: Convertible, 3.0L. 2.9L. Genuine Audi Automatic Transmission Mount Bracket 8W0-399-118-S. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $91.65
$69.56
MSRP $91.65
$69.56
17
Automatic Transmission Mount Bolt Audi
Audi Description: The original equipment Audi Automatic Transmission Mount Bolt supplied under part number N-107-204-02 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.26
$1.54
MSRP $2.26
$1.54