Automatic Temperature Controls for 2024 Audi Q8 e-tron
No.
Part # / Description / Price
Price
1
Cowl Cover 
Audi
Audi Description: Listed under Audi part number 4KL-819-401-9B9, this Cowl Cover carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $141.81
$107.64
MSRP $141.81
$107.64
2
Cowl Cover Seal Audi
Audi Description: Genuine Audi Cowl Cover Seal 4KE-823-723-A. This original equipment component creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $96.65
$73.36
MSRP $96.65
$73.36
3
Cabin Air Intake Duct Audi
Audi Description: Listed under Audi part number 4KL-819-904-C, this Cabin Air Intake Duct delivers metered, filtered air to the combustion chambers, and any unmetered air or restriction on this path shifts fuel trims and dulls throttle response. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
4
Instrument Panel Air Duct Bolt Audi
Audi Description: Genuine Audi Instrument Panel Air Duct Bolt N-912-378-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $0.60
$0.41
MSRP $0.60
$0.41
5
Air Grille Audi
Audi Description: Audi part number 4KE-819-408, the factory Air Grille, finishes and protects an exterior surface, and while the function is partly cosmetic, these components also manage airflow, shield against debris, and seal transitions between panels. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $36.98
$25.24
MSRP $36.98
$25.24
6
Ambient Air Quality Sensor Audi
Audi Description: This factory Audi Ambient Air Quality Sensor (4H0-907-658-C) converts a physical condition into a signal the engine control module uses to set fueling and timing, so a drifting sensor degrades performance long before it triggers a hard fault. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $156.05
$112.36
MSRP $156.05
$112.36
7
Cowl Water Deflector Audi
Audi Description: This factory Audi Cowl Water Deflector (4KL-819-979-C) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $39.16
$26.74
MSRP $39.16
$26.74
8
Instrument Panel Air Duct Rivet Audi
Audi Description: Audi part number 7L6-868-307, the factory Instrument Panel Air Duct Rivet, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.89
$3.32
MSRP $4.89
$3.32
9
Sound Absorber Audi
Audi Description: Upper. Listed under Audi part number 4KE-863-829, this Sound Absorber finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
10
Sound Absorber Audi
Audi Description: Lower. Listed under Audi part number 4KE-863-830, this Sound Absorber finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
11
Sound Absorber Audi
Audi Positions: Left
Description: Side. Listed under Audi part number 4KE-863-827, this Sound Absorber finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
11
Sound Absorber Audi
Audi Positions: Right
Description: Side. Listed under Audi part number 4KE-863-828, this Sound Absorber finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $69.65
$55.96
MSRP $69.65
$55.96
11
Sound Absorber Audi
Audi Positions: Front left
Description: Listed under Audi part number 4KE-864-741, this Sound Absorber finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $14.57
$11.89
MSRP $14.57
$11.89
12
Floor Pan Heat Shield Clip Audi
Audi Description: Genuine Audi Floor Pan Heat Shield Clip N-903-350-04. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.76
$0.52
MSRP $0.76
$0.52
12
Isolator Bracket Audi
Audi Description: Front. With dual zone control. Convertible,. Coupe, 2020-24. 2018-19. Listed under Audi part number WHT-007-080, this Isolator Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.40
$1.63
MSRP $2.40
$1.63
13
Sound Absorber Audi
Audi Description: This factory Audi Sound Absorber (4KE-864-859) finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
14
Engine Compartment Insulation Audi
Audi Description: Listed under Audi part number 4KL-863-947, this Engine Compartment Insulation finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
15
Dashboard Panel Insulator Clip Audi
Audi Description: Sound absorber,button. Insulator,retainer. Lower qtr trim,retainer. Convertible,. Audi part number N-908-713-01, the factory Dashboard Panel Insulator Clip, is a small but load bearing element of the assembly, and using the factory specification matters b ...
MSRP $0.26
$0.18
MSRP $0.26
$0.18
16
Cowl Crossmember Audi
Audi Description: Audi part number 4KE-805-253-B, the factory Cowl Crossmember, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $429.15
$325.72
MSRP $429.15
$325.72
17
Cowl Water Deflector Audi
Audi Positions: Left
Description: This genuine Audi Cowl Water Deflector, part number 4KE-805-265-A, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
17
Cowl Water Deflector Audi
Audi Positions: Right
Description: This genuine Audi Cowl Water Deflector, part number 4KE-805-266, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
18
Cowl Water Deflector Audi
Audi Positions: Left
Description: Genuine Audi Cowl Water Deflector 4KE-805-209. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
18
Cowl Water Deflector Audi
Audi Positions: Right
Description: Listed under Audi part number 4KE-805-210, this Cowl Water Deflector carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
19
Cowl Reinforcement Audi
Audi Positions: Left
Description: This genuine Audi Cowl Reinforcement, part number 4KE-805-645, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
19
Cowl Reinforcement Audi
Audi Positions: Right
Description: Listed under Audi part number 4KE-805-646, this Cowl Reinforcement carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
20
Fuel Filler Neck Mount Plate Gasket Audi
Audi Positions: Left
Description: Audi part number 4KE-819-142, the factory Fuel Filler Neck Mount Plate Gasket, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $11.79
$8.01
MSRP $11.79
$8.01
21
Cowl Panel Reinforcement Audi
Audi Description: Listed under Audi part number 4KE-805-713, this Cowl Panel Reinforcement carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
22
Cowl Panel Reinforcement Seal Audi
Audi Description: Genuine Audi Cowl Panel Reinforcement Seal 4KE-819-532. This original equipment component creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
23
Cowl Panel Reinforcement Audi
Audi Description: Audi part number 4KE-804-367, the factory Cowl Panel Reinforcement, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $47.38
$31.72
MSRP $47.38
$31.72
24
Firewall Audi
Audi Description: The original equipment Audi Firewall supplied under part number 4KE-805-431-A carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
25
End Plate Audi
Audi Description: Audi part number 4KE-802-755-A, the factory End Plate, is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.