Powertrain Control for 2024 Audi S8

1

6H905110P - Electrical: Ignition Coil for Audi Image

Direct Ignition Coil

Audi

Description: To 02/26/2018. From 06/04/2015. To 03/14/2018. To 01/29/2018. To 03/25/2018. Genuine Audi Direct Ignition Coil 06H-905-110-P. This original equipment component initiates combustion at a precisely controlled moment, and because ignition energy demand rises ...

MSRP $104.98

$79.37

MSRP $104.98

$79.37

2

6H905199C - Electrical: Connector for Audi Image

Direct Ignition Coil Boot

06H-905-199-C

Audi

Notes: PARTS: Part included with ignition coil.

Description: Genuine Audi Direct Ignition Coil Boot 06H-905-199-C. This original equipment component creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.

MSRP $48.32

$38.82

MSRP $48.32

$38.82

3

Spark Plug

0P2-905-601

Audi

Description: 4.0L, SQ8.
Spark Plug.

View Details

4

6M907601G - Electrical: Camshaft Sensor for Audi Image

Engine Camshaft Position Sensor

06M-907-601-G

Audi

View Details

5

57906433C - Electrical: Crankshaft Sensor for Audi Image

Engine Crankshaft Position Sensor

057-906-433-C

Audi

Description: The original equipment Audi Engine Crankshaft Position Sensor supplied under part number 057-906-433-C operates inside the engine's rotating and sealing envelope, where clearances measured in hundredths of a millimeter decide oil control, compression sealing, and long term durability. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.

MSRP $60.65

$48.73

MSRP $60.65

$48.73

6

6M905377 - Electrical: Knock Sensor for Audi Image

Ignition Knock (Detonation) Sensor

06M-905-377

Audi

Description:
Ignition Knock (Detonation) Sensor.

View Details

7

ECM

4N0-907-557-P-4N4

Audi

Notes: PARTS: Part listed for estimating purposes only. Contact local dealer for specific part number and pricing.

Description: 4.0L, S8. This genuine Audi ECM, part number 4N0-907-557-P-4N4, executes the control strategy for its subsystem, and because Audi modules are networked and component protected, a replacement is a software event as much as a hardware one. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.

MSRP $1,170.12

$962.13

MSRP $1,170.12

$962.13

8

Engine Control Module Bracket

4N1-907-285

Audi

Description: 4.0L. Genuine Audi Engine Control Module Bracket 4N1-907-285. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.

MSRP $26.32

$21.55

MSRP $26.32

$21.55

8

Engine Control Module Bracket

4N0-907-179-A

Audi

Description: Electro-hydraulic engine mount. This factory Audi Engine Control Module Bracket (4N0-907-179-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.

MSRP $64.98

$52.21

MSRP $64.98

$52.21

8

Engine Control Module Bracket

4N0-907-713

Audi

Description: All wheel drive, type 1. This factory Audi Engine Control Module Bracket (4N0-907-713) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.

MSRP $66.82

$53.68

MSRP $66.82

$53.68

8

Engine Control Module Bracket

4N0-907-713-A

Audi

Description: All wheel drive, type 2. This factory Audi Engine Control Module Bracket (4N0-907-713-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.

MSRP $64.48

$51.81

MSRP $64.48

$51.81

Air Conditioning & Heat

Air Intake & Fuel Delivery

Brakes & Brake Parts

Charging & Starting Systems

Cooling Systems

Engine & Components

Exhaust

Exterior

Filters

Interior

Lighting & Lamps

Suspension & Steering

Transmission & Drivetrain

Wheels, Tire & Parts

Vehicle

Here for All Your Automotive Needs

Accessories

Shop Parts & Accessories

Shop Aftermarket

Shop Clearance

Powertrain Control for 2024 Audi S8

My Garage

Categories

Powertrain Control for 2024 Audi S8