Electrical Components for 2025 Audi SQ6 e-tron
Related Parts
Part # / Description / Price
Price
Strainer Gasket 
Audi
Audi Notes: PARTS: Part included with strainer.
Description: Drive motor-rear. Audi part number 0EL-901-112, the factory Strainer Gasket, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $9.10
$7.43
MSRP $9.10
$7.43
Strainer Seal Audi
Audi Notes: PARTS: Part included with strainer.
Description: Drive motor-rear. Listed under Audi part number 0EL-901-112-A, this Strainer Seal creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $9.10
$7.43
MSRP $9.10
$7.43
Engine Coolant Pipe Gasket Audi
Audi Notes: PARTS: Part included with cooling pipe.
Description: Drive motor-front. Listed under Audi part number 0EL-901-219, this Engine Coolant Pipe Gasket creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $26.03
$21.32
MSRP $26.03
$21.32
Engine Coolant Pipe Seal Audi
Audi Notes: PARTS: Part included with cooling pipe.
Description: Drive motor-front. The original equipment Audi Engine Coolant Pipe Seal supplied under part number 0EL-901-219-A creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of ...
MSRP $26.03
$21.32
MSRP $26.03
$21.32
Strainer Gasket Audi
Audi Notes: PARTS: Part included with strainer.
Description: Drive motor-front. This genuine Audi Strainer Gasket, part number 0EN-901-112, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $9.10
$7.43
MSRP $9.10
$7.43
Engine Coolant Pipe Gasket Audi
Audi Notes: PARTS: Part included with adapter.
Description: Drive motor-front. This genuine Audi Adapter Gasket, part number 0EN-901-219, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1.43
$1.17
MSRP $1.43
$1.17
Engine Coolant Pipe Seal Audi
Audi Notes: PARTS: Part included with adapter.
Description: Drive motor-front. The original equipment Audi Adapter Seal supplied under part number 0EN-901-219-A creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.62
$0.50
MSRP $0.62
$0.50
Window Regulator Nut Audi
Audi Description: Listed under Audi part number N-015-082-10, this Window Regulator Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
Brake Dust Shield Bolt Audi
Audi Description: Engine noise production. 360x36 mm. 358x28 mm. 420x40 mm. Rear insulator,bolt. This factory Audi Brake Dust Shield Bolt (N-100-829-13) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.24
$0.16
MSRP $0.24
$0.16
Engine Coolant Bypass Pipe Bolt Audi
Audi Notes: PARTS: Part included with drive unit.
Description: The original equipment Audi Engine Coolant Bypass Pipe Bolt supplied under part number N-104-056-04 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $0.36
$0.24
MSRP $0.36
$0.24
Engine Intake Manifold Bolt Audi
Audi Description: 3.0L. Automatied driving. 4.0L. The original equipment Audi Engine Intake Manifold Bolt supplied under part number N-104-057-02 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $1.40
$0.95
MSRP $1.40
$0.95
Hybrid / Electric Vehicle Sound Alert Speaker Bracket Bolt Audi
Audi Description: The original equipment Audi Hybrid / Electric Vehicle Sound Alert Speaker Bracket Bolt supplied under part number N-104-422-04 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $4.36
$2.96
MSRP $4.36
$2.96
Engine Camshaft Position Sensor Bolt Audi
Audi Description: This factory Audi Engine Camshaft Position Sensor Bolt (N-104-514-05) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $0.76
$0.52
MSRP $0.76
$0.52
A/C Refrigerant Line Screw Audi
Audi Description: Listed under Audi part number N-104-734-02, this A/C Refrigerant Line Screw is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $0.54
$0.37
MSRP $0.54
$0.37
Drive Motor Bolt Audi
Audi Notes: PARTS: Part included with drive unit.
Description: Drive motor-rear. This factory Audi Support Screw (N-106-730-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1.13
$0.76
MSRP $1.13
$0.76
Bumper Cover Support Rail Bolt Audi
Audi Description: Genuine Audi Bumper Cover Support Rail Bolt N-107-480-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $0.70
$0.48
MSRP $0.70
$0.48
Roof Luggage Carrier Side Rail Nut Audi
Audi Description: Listed under Audi part number N-905-708-02, this Roof Luggage Carrier Side Rail Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
Evaporative Emissions System Line Clamp Audi
Audi Notes: PARTS: Part included with cooling pipe.
Description: Audi part number N-906-869-01, the factory Evaporative Emissions System Line Clamp, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.36
$0.24
MSRP $0.36
$0.24
Drive Unit Clip Audi
Audi Notes: PARTS: Part included with drive unit.
Description: Drive motor-front. This genuine Audi Drive Unit Clip, part number N-906-870-04, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $32.58
$22.24
MSRP $32.58
$22.24
Blind Spot Detection System Warning Sensor Bolt Audi
Audi Description: Genuine Audi Blind Spot Detection System Warning Sensor Bolt N-909-059-02. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $2.78
$1.89
MSRP $2.78
$1.89
Hybrid / Electric Vehicle Sound Alert Speaker Bracket Bolt Audi
Audi Description: Audi part number N-909-936-03, the factory Hybrid / Electric Vehicle Sound Alert Speaker Bracket Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $4.36
$2.96
MSRP $4.36
$2.96
Engine Coolant Pipe Bolt Audi
Audi Notes: PARTS: Part included with drive unit.
Description: Drive motor-rear. Drive motor-front. Listed under Audi part number N-910-717-05, this Temp Sensor Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $1.50
$1.02
MSRP $1.50
$1.02
Bracket Nut Audi
Audi Description: Genuine Audi Bracket Nut N-911-893-03. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1.22
$0.83
MSRP $1.22
$0.83
Cover Retainer Audi
Audi Notes: PARTS: Part included with drive unit.
Description: Drive motor-front. Drive motor-rear. Genuine Audi Cover Retainer N-912-977-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $0.30
$0.20
MSRP $0.30
$0.20
Console Trim Panel Nut Audi
Audi Description: Front bracket,nut. Onboard supply control. Convertible, body & components. Coupe, body & components. Covers & components, lower. This genuine Audi Console Trim Panel Nut, part number WHT-000-733, is a small but load bearing element of the assembly, and us ...
MSRP $0.30
$0.20
MSRP $0.30
$0.20
Drive Unit Sleeve Audi
Audi Notes: PARTS: Part included with drive unit.
Description: Drive motor-rear. Listed under Audi part number WHT-009-892, this Drive Unit Sleeve executes the control strategy for its subsystem, and because Audi modules are networked and component protected, a replacement is a software event as much as a hardware one. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.63
$0.52
MSRP $0.63
$0.52