Frame for 2008 Audi R8
No.
Part # / Description / Price
Price
1
Engine Cradle 
Audi
Audi Description: Coupe. manual trans. The original equipment Audi Engine Cradle supplied under part number 420-813-031-F operates inside the engine's rotating and sealing envelope, where clearances measured in hundredths of a millimeter decide oil control, compression sealing, and long term durability. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9,982.13
$8,839.17
MSRP $9,982.13
$8,839.17
2
Air Cleaner Bracket Audi
Audi Notes: PARTS: Part included with rear frame.
Description: Coupe. Genuine Audi Air Cleaner Bracket 420-814-291-D. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $820.81
$623.00
MSRP $820.81
$623.00
4
Frame Side Member Audi
Audi Positions: Rear lower
Description: Coupe, manual trans. Convertible, manual trans. Listed under Audi part number 420-813-032-F, this Frame Side Member carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3,157.13
$2,795.64
MSRP $3,157.13
$2,795.64
4
Frame Side Member Audi
Audi Positions: Rear left lower rearward
Description: Coupe, manual trans. Convertible, manual trans. This factory Audi Frame Side Member (420-813-109-E) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
4
Frame Side Member Audi
Audi Positions: Rear right lower rearward
Description: Coupe, manual trans. Convertible, manual trans. This genuine Audi Frame Side Member, part number 420-813-110-E, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
5
Suspension Control Arm Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with strut mount.
Description: Coupe, manual trans. Convertible, manual trans. Audi part number 420-813-723-D, the factory Suspension Control Arm Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
5
Suspension Control Arm Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with strut mount.
Description: Coupe, manual trans. Convertible, manual trans. This factory Audi Suspension Control Arm Bracket (420-813-724-D) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
6
Headrest Guide Audi
Audi Positions: Left
Notes: PARTS: Part included with strut mount.
Description: Coupe. Convertible. Listed under Audi part number 420-813-878, this Headrest Guide forms part of the factory seat assembly, where foam density, cover tension, and mounting geometry all work together to hold the occupant in the position Audi engineered for comfort and restraint performance. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $186.67
$142.80
MSRP $186.67
$142.80
7
Bumper Cover Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with strut mount.
Description: Coupe. Convertible. The original equipment Audi Bumper Cover Bracket supplied under part number 420-813-541-C is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $61.32
$49.26
MSRP $61.32
$49.26
7
Bumper Cover Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with strut mount.
Description: Coupe. Convertible. The original equipment Audi Bumper Cover Bracket supplied under part number 420-813-542-C is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $69.15
$55.56
MSRP $69.15
$55.56
9
Suspension Subframe Crossmember Audi
Audi Description: Coupe, manual trans. Convertible, manual trans. This factory Audi Suspension Subframe Crossmember (420-814-285-C) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $808.31
$613.51
MSRP $808.31
$613.51
10
Spacer Plate Audi
Audi Positions: Left
Description: Coupe, .05 mm. Coupe, .5mm. Convertible, .05 mm. Convertible, .5mm. This genuine Audi Spacer Plate, part number 420-813-176, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $50.83
$40.84
MSRP $50.83
$40.84
10
Spacer Plate Audi
Audi Positions: Left
Description: Coupe, 1.0 mm. Coupe, 1.0mm. Convertible, 1.0 mm. Convertible, 1.0mm. Listed under Audi part number 420-813-176-A, this Spacer Plate is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
11
Exhaust Manifold Bolt Audi
Audi Positions: Left
Description: Coupe. 5.2L, auto trans. Convertible. 4.2L, auto trans. Genuine Audi Exhaust Manifold Bolt WHT-002-459. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $4.09
$2.79
MSRP $4.09
$2.79
12
Spacer Plate Lower Bolt Audi
Audi Positions: Left
Notes: PARTS: Part included with strut mount.
Description: Coupe. Convertible. This factory Audi Spacer Plate Lower Bolt (N-107-094-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $2.22
$1.51
MSRP $2.22
$1.51
13
Frame Side Member Bracket Audi
Audi Positions: Left
Description: Convertible. Coupe, from vin 429002501 to 2/08/10, from vin 429002501 to 2/08/10. Coupe, to vin 429002500. Listed under Audi part number 420-810-251-H, this Frame Side Member Bracket is a small but load bearing element of the assembly, and using the facto ...
MSRP $137.20
$104.13
MSRP $137.20
$104.13
13
Frame Side Member Bracket Audi
Audi Positions: Right
Description: Convertible. Coupe, from 2/09/10, from 2/09/10. Coupe, to vin 429002500. Coupe, from vin 429002501 to 2/08/10, from vin 429002501 to 2/08/10. This factory Audi Frame Side Member Bracket (420-810-252-H) is a small but load bearing element of the assembly, ...
MSRP $291.65
$223.11
MSRP $291.65
$223.11
14
Fender Rail Audi
Audi Positions: Left
Description: Coupe. This factory Audi Fender Rail (420-813-077-E) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $429.15
$325.72
MSRP $429.15
$325.72
14
Fender Rail Audi
Audi Positions: Right
Description: Coupe. Audi part number 420-813-078-E, the factory Fender Rail, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $429.15
$325.72
MSRP $429.15
$325.72
15
Drive Shaft Mount Bolt Audi
Audi Positions: Left
Description: Drive shaft,mount bolt. Coupe. 2.0L, 2009-15 with awd, TT. Convertible, with awd, 2012-17. 2.0L, 2009-15 with awd, tts. 2.0L 2008 all 2009 without awd. 3.2L. Audi part number N-019-530-6, the factory Drive Shaft Mount Bolt, is a small but load bearing ele ...
MSRP $4.86
$3.30
MSRP $4.86
$3.30
17
Frame Side Member Bracket Audi
Audi Positions: Left
Description: Coupe. from vin 428004501. Coupe, to vin 428004500. Audi part number 420-809-063-D, the factory Frame Side Member Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $591.64
$449.06
MSRP $591.64
$449.06
17
Frame Side Member Bracket Audi
Audi Positions: Right
Description: Coupe. from vin 428004501. This factory Audi Frame Side Member Bracket (420-809-064-D) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $591.64
$449.06
MSRP $591.64
$449.06
18
Frame Side Member Bracket Audi
Audi Positions: Left
Description: Coupe. Convertible. The original equipment Audi Frame Side Member Bracket supplied under part number 420-814-541-C is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $32.32
$22.06
MSRP $32.32
$22.06
18
Frame Side Member Bracket Audi
Audi Positions: Right
Description: Coupe. Convertible. The original equipment Audi Frame Side Member Bracket supplied under part number 420-814-542-C is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $93.32
$70.83
MSRP $93.32
$70.83
19
Rear Body Reinforcement Audi
Audi Positions: Left
Description: Coupe. Listed under Audi part number 420-809-761-A, this Rear Body Reinforcement carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
19
Rear Body Reinforcement Audi
Audi Positions: Right
Description: Coupe. Genuine Audi Rear Body Reinforcement 420-809-762-A. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
20
Rear Body Panel Audi
Audi Description: Coupe. Convertible. Audi part number 420-813-501-E, the factory Rear Body Panel, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $499.98
$379.49
MSRP $499.98
$379.49
21
Floor Pan Audi
Audi Positions: Left
Description: Coupe. The original equipment Audi Floor Pan supplied under part number 420-813-503-D forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
21
Floor Pan Audi
Audi Positions: Right
Description: Coupe. The original equipment Audi Floor Pan supplied under part number 420-813-504-D forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
22
Floor Pan Reinforcement Audi
Audi Positions: Left
Description: Coupe. Convertible. Genuine Audi Floor Pan Reinforcement 420-803-329-N. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
22
Floor Pan Reinforcement Audi
Audi Positions: Right
Description: Coupe. Convertible. This genuine Audi Floor Pan Reinforcement, part number 420-803-330-N, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
23
Floor Pan Reinforcement Brace Audi
Audi Positions: Left
Description: Coupe. Convertible. This factory Audi Floor Pan Reinforcement Brace (420-803-501-Q) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
23
Floor Pan Reinforcement Brace Audi
Audi Positions: Right
Description: Coupe. Convertible. This factory Audi Floor Pan Reinforcement Brace (420-803-502-M) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
24
Frame Side Member Audi
Audi Positions: Left
Description: Coupe. This factory Audi Frame Side Member (420-810-991-B) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
24
Frame Side Member Audi
Audi Positions: Right
Description: Coupe. This factory Audi Frame Side Member (420-810-992-B) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
25
Frame Side Member Reinforcement Audi
Audi Positions: Left
Description: Coupe. Listed under Audi part number 420-809-239-C, this Frame Side Member Reinforcement carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
25
Frame Side Member Reinforcement Audi
Audi Positions: Right
Description: Coupe. The original equipment Audi Frame Side Member Reinforcement supplied under part number 420-809-240-C carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $824.99
$626.16
MSRP $824.99
$626.16