Trans Mounting for 2008 Audi R8
No.
Part # / Description / Price
Price
1
Support Bracket 
Audi
Audi Positions: Left
Description: 5.2L, manual trans. 4.2L, manual trans. This factory Audi Support Bracket (420-399-113-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $228.32
$174.66
MSRP $228.32
$174.66
2
Support Bracket Bolt Audi
Audi Positions: Right
Description: 5.2L, manual trans. 4.2L, manual trans. Listed under Audi part number N-107-547-01, this Support Bracket Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1.00
$0.68
MSRP $1.00
$0.68
2
Trans Mount Bolt Audi
Audi Description: Trans mount,bolt. 5.2L, manual trans. 4.2L, manual trans. Listed under Audi part number N-107-281-01, this Trans Mount Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $14.99
$10.20
MSRP $14.99
$10.20
3
Trans Mount Audi
Audi Positions: Left
Description: R8. 5.2L, manual trans. 4.2L, manual trans. Audi part number 420-399-151-B, the factory Trans Mount, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $520.00
$394.68
MSRP $520.00
$394.68
5
Trans Mount Nut Audi
Audi Positions: Right
Description: 5.2L, manual trans. 4.2L, manual trans. Listed under Audi part number N-107-175-01, this Trans Mount Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $19.48
$13.25
MSRP $19.48
$13.25
6
Trans Mount Screw Audi
Audi Positions: Left
Description: Trans mount,screw. 5.2L, manual trans. 4.2L, manual trans. P/S pump,rear bolt. 2010-12, 3.0L. 2008-12, 3.2L. Audi part number N-910-264-03, the factory Trans Mount Screw, is a small but load bearing element of the assembly, and using the factory specifica ...
MSRP $6.15
$4.19
MSRP $6.15
$4.19
7
Floor Pan Heat Shield Audi
Audi Description: 4.2L. 5.2L. The original equipment Audi Floor Pan Heat Shield supplied under part number 420-301-325 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
8
Floor Pan Heat Shield Screw Audi
Audi Description: 4.2L. 5.2L. This factory Audi Floor Pan Heat Shield Screw (N-103-389-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $2.78
$1.89
MSRP $2.78
$1.89
9
Floor Pan Heat Shield Audi
Audi Description: 4.2L. 5.2L. Listed under Audi part number 420-301-325-D, this Floor Pan Heat Shield forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $149.47
$113.45
MSRP $149.47
$113.45
11
Floor Pan Heat Shield Clip Audi
Audi Description: 4.2L. 5.2L. Listed under Audi part number 420-301-365, this Floor Pan Heat Shield Clip is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
12
Floor Pan Heat Shield Audi
Audi Description: 4.2L. 5.2L. The original equipment Audi Floor Pan Heat Shield supplied under part number 420-301-325-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
12
Floor Pan Heat Shield Audi
Audi Positions: Front
Description: Coupe, engine compartment. This factory Audi Floor Pan Heat Shield (420-825-249-B) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
12
Floor Pan Heat Shield Audi
Audi Description: Coupe, engine compartment, center. Coupe, center, manual trans. Convertible, engine compartment, center. Convertible, center, manual trans. The original equipment Audi Floor Pan Heat Shield supplied under part number 420-825-645-C forms part of the vehicl ...
MSRP $274.99
$210.38
MSRP $274.99
$210.38
12
Floor Pan Heat Shield Audi
Audi Description: Coupe, engine compartment, center. Coupe, center, manual trans. Convertible, engine compartment, center. Convertible, center, manual trans. This genuine Audi Floor Pan Heat Shield, part number 420-825-646-C, forms part of the vehicle's visible exterior su ...
MSRP $256.66
$196.35
MSRP $256.66
$196.35
12
Exhaust Heat Shield Audi
Audi Positions: Left
Description: 5.2L, side. Coupe engine compartment. rear. 4.2L, side. Convertible, rear. The original equipment Audi Exhaust Heat Shield supplied under part number 420-825-689-B routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $248.33
$189.98
MSRP $248.33
$189.98
12
Exhaust Heat Shield Audi
Audi Positions: Right
Description: 5.2L, side. Coupe engine compartment. rear. 4.2L, side. Convertible, rear. This genuine Audi Exhaust Heat Shield, part number 420-825-690-B, routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $248.33
$189.98
MSRP $248.33
$189.98
12
Floor Pan Heat Shield Audi
Audi Positions: Front left lower
Description: Coupe, engine compartment, front, 4.2L. Coupe, engine compartment, front, 5.2L. The original equipment Audi Floor Pan Heat Shield supplied under part number 420-825-731-E forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $321.68
$246.08
MSRP $321.68
$246.08
12
Floor Pan Heat Shield Audi
Audi Positions: Front right lower
Description: Coupe, engine compartment, front, 4.2L. Coupe, engine compartment, front, 5.2L. Audi part number 420-825-733-A, the factory Floor Pan Heat Shield, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $325.00
$248.63
MSRP $325.00
$248.63
12
Floor Pan Heat Shield Audi
Audi Positions: Front left upper
Description: Coupe, engine compartment, front. Coupe, front, manual trans. Listed under Audi part number 420-825-741, this Floor Pan Heat Shield forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.