Stabilizer Bar & Components for 2008 Audi TT
No.
Part # / Description / Price
Price
1
Suspension Stabilizer Bar 
Audi
Audi Description: A3. Without awd. TT. Without Quattro. The original equipment Audi Suspension Stabilizer Bar supplied under part number 1K0-511-409-BN controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
2
Suspension Stabilizer Bar Bushing Audi
Audi Positions: Right
Description: TT. With awd, with 18.5mm stabilizer bar, with 18.5mm stabilizer bar. Without awd. A3. 18,5 x 2,5. Genuine Audi Suspension Stabilizer Bar Bushing 1K0-511-327-AP. This original equipment component controls wheel motion and isolates the body from road input ...
MSRP $21.18
$14.46
MSRP $21.18
$14.46
3
Suspension Stabilizer Bar Bracket Audi
Audi Positions: Right
Description: A8, S8. TT. A3. Q3. Awd. Fwd. Audi part number 1K0-511-439-E, the factory Suspension Stabilizer Bar Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $50.79
$34.00
MSRP $50.79
$34.00
4
Suspension Stabilizer Bar Bracket Bolt Audi
Audi Positions: Left
Description: This factory Audi Suspension Stabilizer Bar Bracket Bolt (N-106-447-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.86
$3.30
MSRP $4.86
$3.30
5
Stabilizer Link Audi
Audi Positions: Left
Description: A3. Q3. TT. Fwd. Awd. The original equipment Audi Stabilizer Link supplied under part number 1K0-505-465-AA controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $77.32
$62.12
MSRP $77.32
$62.12
6
Suspension Stabilizer Bar Link Nut Audi
Audi Positions: Left
Description: Genuine Audi Suspension Stabilizer Bar Link Nut N-102-861-10. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $4.37
$2.96
MSRP $4.37
$2.96
7
Suspension Stabilizer Bar Link Bolt Audi
Audi Positions: Right
Description: Fwd. Awd. Genuine Audi Suspension Stabilizer Bar Link Bolt WHT-000-226. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $6.50
$4.42
MSRP $6.50
$4.42
9
Lateral Arm Audi
Audi Positions: Left
Description: Incl.Bushings. Without awd. TT. A3. All. Genuine Audi Lateral Arm 1K0-501-529-H. This original equipment component is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $131.64
$99.92
MSRP $131.64
$99.92
10
Upper Control Arm Washer Audi
Audi Positions: Rear
Description: Upper cntrl arm,washer. Awd. Link assy,lock washer. Fwd. Knuckle,lock washer. Audi part number 1K0-505-193, the factory Upper Control Arm Washer, is a small but load bearing element of the assembly, and using the factory specification matters because thre ...
MSRP $8.58
$5.83
MSRP $8.58
$5.83
11
Lateral Arm Bolt Audi
Audi Positions: Left
Description: Without awd. This factory Audi Lateral Arm Bolt (N-106-423-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $4.64
$3.16
MSRP $4.64
$3.16
12
Ft Lower Control Arm Lock Nut Audi
Audi Positions: Right
Description: Audi part number N-101-064-03, the factory Ft Lower Control Arm Lock Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $5.98
$4.07
MSRP $5.98
$4.07
12
Upper Control Arm Retainer Nut Audi
Audi Positions: Rear
Description: This factory Audi Upper Control Arm Retainer Nut (N-104-018-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.72
$2.53
MSRP $3.72
$2.53
13
Lateral Arm Bolt Audi
Audi Positions: Left
Description: Upper cntrl arm,bolt. Fwd. Lateral arm,bolt. Without awd. The original equipment Audi Lateral Arm Bolt supplied under part number N-910-767-01 is a small but load bearing element of the assembly, and using the factory specification matters because thread ...
MSRP $20.18
$13.77
MSRP $20.18
$13.77
15
Upper Control Arm Lock Washer Audi
Audi Positions: Right
Description: Upper cntrl arm,lock washer. Convertible, with awd. Sedan, with awd. Link assy,washer. Fwd. Knuckle,washer. Without awd. To 01/23/2023. This factory Audi Upper Control Arm Lock Washer (WHT-000-724) is a small but load bearing element of the assembly, and ...
MSRP $14.72
$10.01
MSRP $14.72
$10.01
17
Suspension Track Bar Audi
Audi Positions: Right
Description: Without awd. Audi part number 8J7-505-478, the factory Suspension Track Bar, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
17
Suspension Track Bar Audi
Audi Positions: Left
Description: Without awd. This genuine Audi Suspension Track Bar, part number 8J7-505-477, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
19
Suspension Track Bar Bolt Audi
Audi Positions: Left
Description: Without awd. This genuine Audi Suspension Track Bar Bolt, part number N-908-709-02, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1.26
$0.86
MSRP $1.26
$0.86