Radiator Support for 2008 Audi TT
No.
Part # / Description / Price
Price
1
Radiator Support Panel 
Audi
Audi Description: Radiator Support Panel. w/o TT RS. Carrier. Center. Closure. Frame. Front c'member. Mount. Radiator.
Fits TT, TTS
w/o TT RS. w/o TT rs. The original equipment Audi Radiator Support Panel supplied under part number 8J0-805-594-G moves heat out of the ...
MSRP $745.00
$565.46
MSRP $745.00
$565.46
2
Convertible Top Mounting Plate Bolt Audi
Audi Description: Listed under Audi part number N-906-847-05, this Convertible Top Mounting Plate Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.08
$2.09
MSRP $3.08
$2.09
3
Deck Lid Hinge Bolt Audi
Audi Description: Radiator support,screw. Hinge,bolt. Convertible. front. Audi part number N-906-309-03, the factory Deck Lid Hinge Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $4.36
$2.96
MSRP $4.36
$2.96
4
Radiator Support Bracket Audi
Audi Positions: Left
Description: Genuine Audi Radiator Support Bracket 8J0-805-637. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $28.58
$19.51
MSRP $28.58
$19.51
4
Radiator Support Bracket Audi
Audi Positions: Right
Description: Listed under Audi part number 8J0-805-638, this Radiator Support Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $28.58
$19.51
MSRP $28.58
$19.51
5
Front Lower Radiator Support Splash Shield – Underbody Protection Audi
Audi Description: Listed under Audi part number 8J7-825-237, this Front Lower Radiator Support Splash Shield – Underbody Protection moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling c ...
MSRP $221.67
$167.58
MSRP $221.67
$167.58
5
Radiator Support Splash Shield Audi
Audi Description: Coupe. Coupe w/o TT RS. Radiator Support Splash Shield. Baffle Plate. Carrier. Center Cover. Cover panel. Crossmember. Deflector. End Plate. Front Cover. Front Deflector. Liner extension. Lower Cover. Lower Plate. Radiator Support Splash. Side Cover. Sight ...
MSRP $391.66
$299.63
MSRP $391.66
$299.63
6
Quarter Panel Splash Shield Screw Audi
Audi Description: Genuine Audi Quarter Panel Splash Shield Screw N-907-750-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
6
Radiator Support Splash Shield Bolt Audi
Audi Description: Support,bolt. Convertible. This genuine Audi Radiator Support Splash Shield Bolt, part number N-910-097-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.14
$3.50
MSRP $5.14
$3.50
6
Side Shield Bolt Audi
Audi Description: Side shield,bolt. Under cover,retainer screw. Splash shield,bolt. 2011-14. 2015-18, cover & trim, with S8, S8 Plus, with a8l sport. Type 3. Audi part number 1K0-825-951, the factory Side Shield Bolt, is a small but load bearing element of the assembly, an ...
MSRP $2.46
$1.67
MSRP $2.46
$1.67
8
Radiator Support Splash Shield Bolt Audi
Audi Description: M8x20. Coupe. Sedan/wagon,. Under cover,bolt. Audi part number WHT-000-729-A, the factory Radiator Support Splash Shield Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $1.67
$1.36
MSRP $1.67
$1.36
9
Ft Fender Liner U-Nut Audi
Audi Description: Genuine Audi Ft Fender Liner U-Nut N-104-337-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.08
$2.09
MSRP $3.08
$2.09
10
Chassis Frame Reinforcement Audi
Audi Description: Convertible. Audi part number 8J7-802-017-K, the factory Chassis Frame Reinforcement, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
10
Chassis Frame Reinforcement Audi
Audi Description: Coupe, without TT rs. Coupe, from vin 8j8049901. Genuine Audi Chassis Frame Reinforcement 8J8-802-017-F. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $670.00
$508.53
MSRP $670.00
$508.53
11
Hinge Bolt Audi
Audi Description: 2017-25. to lift gate. To 11/12/10. Diesel. 5.2L, m8x35. With TT rs. 3.0L. Listed under Audi part number N-904-400-03, this Hinge Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, c ...
MSRP $1.74
$1.18
MSRP $1.74
$1.18
14
Radiator Support Air Duct Audi
Audi Positions: Right
Description: TT. Audi part number 8J0-121-284-A, the factory Radiator Support Air Duct, moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling capacity shows up as performance and economy loss before it shows as overheating. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
15
Radiator Support Air Duct Audi
Audi Positions: Left
Description: TT. This genuine Audi Radiator Support Air Duct, part number 8J0-121-283-A, moves heat out of the engine and charge air circuits, and because modern Audi engines run tight thermal windows, a partial loss of cooling capacity shows up as performance and economy loss before it shows as overheating. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $155.98
$118.39
MSRP $155.98
$118.39
16
Ambient Air Temperature Sensor Audi
Audi Description: Listed under Audi part number 8Z0-820-535, this Ambient Air Temperature Sensor converts a physical condition into a signal the engine control module uses to set fueling and timing, so a drifting sensor degrades performance long before it triggers a hard fault. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $40.59
$27.17
MSRP $40.59
$27.17