Trunk for 2012 Audi A8 Quattro
No.
Part # / Description / Price
Price
1
Deck Lid 
Audi
Audi Notes: PARTS: Part has related component that cannot be reused/ reinstalled; trim molding.
Description: This genuine Audi Deck Lid, part number 4H0-827-023-B, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3,083.32
$2,340.24
MSRP $3,083.32
$2,340.24
2
Deck Lid Drain Plug Audi
Audi Description: 2017-21. 2013-2016. Suv, type 2. Sedan, bottom. Sportback. Convertible. Coupe. This factory Audi Deck Lid Drain Plug (8P4-827-951-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $6.15
$4.19
MSRP $6.15
$4.19
3
Deck Lid Stop Buffer Audi
Audi Description: To 02/17/2013. Upper. The original equipment Audi Deck Lid Stop Buffer supplied under part number 4H0-827-589-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
4
Deck Lid Stop Buffer Audi
Audi Positions: Left
Description: The original equipment Audi Deck Lid Stop Buffer supplied under part number 4H0-827-373-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $15.89
$10.80
MSRP $15.89
$10.80
4
Deck Lid Stop Buffer Audi
Audi Positions: Right
Description: The original equipment Audi Deck Lid Stop Buffer supplied under part number 4H0-827-374-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $15.89
$10.80
MSRP $15.89
$10.80
5
Tail Light Assembly Cap Audi
Audi Positions: Left
Description: 2015-18, inner. 2011-14, inner. This factory Audi Tail Light Assembly Cap (4H0-827-563) provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
6
Deck Lid Hinge Audi
Audi Positions: Right
Description: This factory Audi Deck Lid Hinge (4H0-827-300-E) manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $361.67
$276.68
MSRP $361.67
$276.68
6
Deck Lid Hinge Audi
Audi Positions: Left
Description: Listed under Audi part number 4H0-827-299-E, this Deck Lid Hinge manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
7
Hinge Nut Audi
Audi Positions: Left
Description: From 10/05/2020. 2017-25. Sportback. Convertible,. Coupe,. Lid & components. Audi part number N-905-115-08, the factory Hinge Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $6.06
$4.12
MSRP $6.06
$4.12
8
Hinge Bolt Audi
Audi Positions: Right
Description: M8x25. 2017-25. Hood & hardware. Convertible,. Coupe,. Genuine Audi Hinge Bolt N-909-590-04. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $2.50
$1.70
MSRP $2.50
$1.70
9
Coil Spring Audi
Audi Positions: Left
Description: This factory Audi Coil Spring (4H0-827-665-C) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
10
Deck Lid Hinge Insulator Audi
Audi Positions: Right
Description: Genuine Audi Deck Lid Hinge Insulator 4H0-827-715. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.26
$3.48
MSRP $4.26
$3.48
11
Trunk Lid Lift Support Audi
Audi Positions: Right
Description: A8, S8. The original equipment Audi Trunk Lid Lift Support supplied under part number 4H0-827-551-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $133.31
$101.19
MSRP $133.31
$101.19
12
Deck Lid Lift Support Stud Audi
Audi Positions: Left
Description: Listed under Audi part number 8J8-827-439, this Deck Lid Lift Support Stud is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $13.33
$9.06
MSRP $13.33
$9.06
13
Deck Lid Stop Buffer Audi
Audi Positions: Left
Description: This factory Audi Deck Lid Stop Buffer (4H0-827-249) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $41.98
$28.11
MSRP $41.98
$28.11
13
Deck Lid Stop Buffer Audi
Audi Description: Audi part number 8E5-827-249-F, the factory Deck Lid Stop Buffer, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $49.58
$33.19
MSRP $49.58
$33.19
14
Deck Lid Hinge Cap Audi
Audi Positions: Left
Description: Audi part number 8P3-827-261-01C, the factory Deck Lid Hinge Cap, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
16
Trunk Lock Actuator Motor Audi
Audi Description: The original equipment Audi Trunk Lock Actuator Motor supplied under part number 4H0-827-505-A conditions and distributes cabin air, where refrigerant charge, airflow path integrity, and actuator calibration together determine whether the system reaches its target temperature. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $271.66
$207.83
MSRP $271.66
$207.83
17
Deck Lid Latch Cover Audi
Audi Description: Convertible,. Sedan,. Listed under Audi part number 4H0-827-520, this Deck Lid Latch Cover manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
18
Deck Lid Release Cable Audi
Audi Description: Listed under Audi part number 8E5-827-531-K, this Deck Lid Release Cable carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
18
Deck Lid Release Cable Audi
Audi Positions: Rear
Description: Convertible,. This factory Audi Deck Lid Release Cable (8J7-880-729) carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $50.58
$33.86
MSRP $50.58
$33.86
19
Lift-Gate Lock Striker Plate Audi
Audi Description: A6, S6. With power closing trunk. With power release. A8, S8. A7, S7, RS7. This factory Audi Lift-Gate Lock Striker Plate (4H0-827-383-A) manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
20
Deck Lid Seal Audi
Audi Description: Genuine Audi Deck Lid Seal 4H0-827-705-B. This original equipment component creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $376.66
$288.15
MSRP $376.66
$288.15
21
Trunk Lid Pull Down Motor Audi
Audi Description: A8, S8. Audi part number 4H0-827-851-D, the factory Trunk Lid Pull Down Motor, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1,103.07
$907.01
MSRP $1,103.07
$907.01
22
Trunk Lid Pull Down Motor Insulator Audi
Audi Description: Audi part number 4H0-827-629-B, the factory Trunk Lid Pull Down Motor Insulator, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $10.00
$6.80
MSRP $10.00
$6.80
23
Seat Hinge Cover Audi
Audi Positions: Right
Description: The original equipment Audi Seat Hinge Cover supplied under part number 4H0-971-446-B forms part of the factory seat assembly, where foam density, cover tension, and mounting geometry all work together to hold the occupant in the position Audi engineered for comfort and restraint performance. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $78.49
$63.05
MSRP $78.49
$63.05
23
Seat Hinge Cover Audi
Audi Positions: Left
Description: Audi part number 4H0-971-445-B, the factory Seat Hinge Cover, forms part of the factory seat assembly, where foam density, cover tension, and mounting geometry all work together to hold the occupant in the position Audi engineered for comfort and restraint performance. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $80.82
$64.93
MSRP $80.82
$64.93
24
Deck Lid Hinge Clip Audi
Audi Description: Coupe,. Genuine Audi Deck Lid Hinge Clip 4H0-827-310. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $7.19
$4.88
MSRP $7.19
$4.88
25
Deck Lid Lock Audi
Audi Description: The original equipment Audi Deck Lid Lock supplied under part number 107-827-573-AC manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $420.81
$319.40
MSRP $420.81
$319.40
26
Deck Lid Handle Audi
Audi Description: Black, with park sensor. CONVERTIBLE. with rear camera. Audi part number 4E0-827-574-M-3FZ, the factory Deck Lid Handle, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $376.67
$288.15
MSRP $376.67
$288.15
26
Deck Lid Handle Audi
Audi Description: Without rear camera. Listed under Audi part number 8E0-827-574-C-3FZ, this Deck Lid Handle manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $363.33
$277.95
MSRP $363.33
$277.95
26
Deck Lid Handle Audi
Audi Description: With rear & front camera, with rear & front camera. This genuine Audi Deck Lid Handle, part number 4H0-827-574-3FZ, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
26
Deck Lid Handle Audi
Audi Positions: Rear
Description: Audi part number 4H0-867-821-9B9, the factory Deck Lid Handle, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
26
Deck Lid Handle Audi
Audi Positions: Rear
Description: Release handle. Convertible,. Audi part number 4F5-880-703, the factory Deck Lid Handle, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $13.04
$8.87
MSRP $13.04
$8.87
27
Interior Grab Bar Cap Audi
Audi Description: This genuine Audi Interior Grab Bar Cap, part number 4H0-827-597, encloses and protects the component behind it, keeping debris, moisture, and heat away from hardware that was not designed to be exposed while also finishing the visible surface. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $22.78
$15.55
MSRP $22.78
$15.55
29
Lift-Gate Pull Handle Bracket Audi
Audi Positions: Left
Description: Outer. From VIN 4L7042001. Convertible. The original equipment Audi Lift-Gate Pull Handle Bracket supplied under part number 8E0-827-657-G is a small but load bearing element of the assembly, and using the factory specification matters because thread pitc ...
MSRP $9.74
$6.62
MSRP $9.74
$6.62
29
Lift-Gate Pull Handle Bracket Audi
Audi Positions: Right
Description: Outer. From VIN 4L7042001. Convertible. The original equipment Audi Lift-Gate Pull Handle Bracket supplied under part number 8E0-827-657-H is a small but load bearing element of the assembly, and using the factory specification matters because thread pitc ...
MSRP $9.74
$6.62
MSRP $9.74
$6.62
30
License Plate Bracket Audi
Audi Description: This genuine Audi License Plate Bracket, part number 4H0-827-113-G-9B9, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $211.66
$161.93
MSRP $211.66
$161.93
31
License Plate Bracket Insulator Audi
Audi Description: Sedan,. Convertible,. Coupe. This factory Audi License Plate Bracket Insulator (8D0-853-419-F) finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $24.78
$16.91
MSRP $24.78
$16.91