Engine & Trans Mounting for 2012 Audi A8 Quattro
No.
Part # / Description / Price
Price
1
Mount 
Audi
Audi Positions: Right
Description: 4.2 Liter. A part that locates and Supports the engine. It also Reduces vibrations From the engine. Carrier. BEARING Support. Motor. Side.
Fits A8
4.2 Liter. A8 Right. A8. 4.2L. Right. This genuine Audi Mount, part number 4G0-199-382-AE, is a small bu ...
MSRP $531.68
$382.80
MSRP $531.68
$382.80
2
Mount Audi
Audi Positions: Left
Description: 4.2 Liter. A part that locates and Supports the engine. It also Reduces vibrations From the engine. Bracket. Carrier. Plate. BEARING. Motor. Side.
Fits A8
4.2 Liter. A8 Left. A8. 4.2L. Left. This factory Audi Mount (4G0-199-381-LB) is a small but load ...
MSRP $869.23
$678.00
MSRP $869.23
$678.00
3
Engine Mount Bracket Audi
Audi Positions: Right
Description: 4.2L. The original equipment Audi Engine Mount Bracket supplied under part number 4H0-199-308-AC is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $205.82
$157.45
MSRP $205.82
$157.45
3
Engine Mount Bracket Audi
Audi Positions: Right
Description: 4.2L. This genuine Audi Engine Mount Bracket, part number 4H0-399-060-B, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
4
Engine Mount Bracket Audi
Audi Positions: Left
Description: 4.2L. This genuine Audi Engine Mount Bracket, part number 4H0-199-307-AC, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $216.65
$165.74
MSRP $216.65
$165.74
5
Engine Mount Heat Shield Audi
Audi Positions: Right
Description: 4.2L. Listed under Audi part number 8K0-199-388-AR, this Engine Mount Heat Shield controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $58.98
$47.39
MSRP $58.98
$47.39
5
Engine Mount Heat Shield Audi
Audi Positions: Right
Description: 4.0L. 6.3L. 4.2L. This factory Audi Engine Mount Heat Shield (4H0-399-308-A) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $52.65
$42.30
MSRP $52.65
$42.30
5
Engine Mount Heat Shield Audi
Audi Positions: Right
Description: Gas. 4.2L. Diesel. This factory Audi Engine Mount Heat Shield (4H0-399-300-A) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $51.38
$34.40
MSRP $51.38
$34.40
6
Engine Mount Heat Shield Audi
Audi Positions: Left
Description: 4.2L. This factory Audi Engine Mount Heat Shield (8K0-199-387-P) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $53.82
$43.24
MSRP $53.82
$43.24
6
Engine Mount Heat Shield Audi
Audi Positions: Left
Description: 4.0L. Gas. 6.3L. 4.2L. Diesel. Audi part number 4H0-399-299-A, the factory Engine Mount Heat Shield, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $51.38
$34.40
MSRP $51.38
$34.40
6
Engine Mount Heat Shield Audi
Audi Positions: Left
Description: 4.0L. 6.3L. 4.2L. Audi part number 4H0-399-307-A, the factory Engine Mount Heat Shield, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $52.65
$42.30
MSRP $52.65
$42.30
7
Engine Cradle Audi
Audi Description: 4.0L. 4.2L. Gas. Diesel. This genuine Audi Engine Cradle, part number 4H0-399-315-AE, operates inside the engine's rotating and sealing envelope, where clearances measured in hundredths of a millimeter decide oil control, compression sealing, and long term durability. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $3,032.71
$2,685.46
MSRP $3,032.71
$2,685.46
8
Engine Cradle Brace Audi
Audi Description: 4.0L. 6.3L. 4.2L. The original equipment Audi Engine Cradle Brace supplied under part number 4H0-399-345-R carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
9
Transmission Crossmember Audi
Audi Description: The original equipment Audi Transmission Crossmember supplied under part number 4H0-399-263-AK manages torque delivery between the engine and the driveline, where hydraulic pressure control, clutch pack condition, and fluid quality determine both shift feel and service life. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $598.98
$454.63
MSRP $598.98
$454.63
10
Automatic Transmission Mount Audi
Audi Positions: Right
Description: 4.0L. 6.3L. 4.2L. Listed under Audi part number 4H0-399-152-BC, this Automatic Transmission Mount controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $499.98
$379.49
MSRP $499.98
$379.49
11
Automatic Transmission Mount Audi
Audi Positions: Left
Description: 4.0L. 6.3L. 4.2L. This genuine Audi Automatic Transmission Mount, part number 4H0-399-151-AT, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $499.98
$379.49
MSRP $499.98
$379.49
12
Automatic Transmission Mount Bracket Audi
Audi Positions: Right
Description: 4.0L. 6.3L. 4.2L. This genuine Audi Automatic Transmission Mount Bracket, part number 4H0-399-114-E, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $62.37
$50.11
MSRP $62.37
$50.11
13
Automatic Transmission Mount Bracket Audi
Audi Positions: Left
Description: 4.0L. 6.3L. 4.2L. The original equipment Audi Automatic Transmission Mount Bracket supplied under part number 4H0-399-113-E is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and ...
MSRP $103.32
$78.42
MSRP $103.32
$78.42
14
Automatic Transmission Mount Brace Audi
Audi Positions: Right
Description: 4.0L. 6.3L. 4.2L. Listed under Audi part number 4H0-399-404-E, this Automatic Transmission Mount Brace controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $40.58
$27.17
MSRP $40.58
$27.17
15
Automatic Transmission Mount Brace Audi
Audi Positions: Left
Description: 4.0L. 6.3L. 4.2L. Listed under Audi part number 4H0-399-403-E, this Automatic Transmission Mount Brace controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
19
Engine Mount Bracket Audi
Audi Positions: Left
Description: 4.2L. Genuine Audi Engine Mount Bracket 4H0-399-059-C. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $256.68
$196.36
MSRP $256.68
$196.36
20
Engine Mount Isolator Audi
Audi Positions: Right
Notes: PARTS: Part included with retainer plate.
Description: 4.0L. 2012-15, without awd. 3.0L gas. 4.2L. 3.0L diesel. 2.0L 2016-18 with awd. This factory Audi Engine Mount Isolator (4H0-199-340-B) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set bo ...
MSRP $7.32
$4.98
MSRP $7.32
$4.98
23
Engine Torque Strut Mount Audi
Audi Positions: Right
Description: 4.0L. 6.3L. 4.2L. Genuine Audi Engine Torque Strut Mount 4H0-399-656-B. This original equipment component controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
24
Engine Torque Strut Mount Audi
Audi Positions: Left
Description: 4.0L. 6.3L. 4.2L. Listed under Audi part number 4H0-399-655-B, this Engine Torque Strut Mount controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
25
Engine Torque Strut Audi
Audi Positions: Right
Description: 4.0L. 6.3L. 4.2L. This genuine Audi Engine Torque Strut, part number 4H0-399-644-B, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $254.49
$194.68
MSRP $254.49
$194.68
26
Engine Torque Strut Audi
Audi Positions: Left
Description: 4.0L. 6.3L. 4.2L. The original equipment Audi Engine Torque Strut supplied under part number 4H0-399-643-B controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $228.32
$174.66
MSRP $228.32
$174.66
27
Engine Torque Strut Nut Audi
Audi Positions: Right
Description: 4.0L. 6.3L. 4.2L. Listed under Audi part number 4H0-399-445-A, this Engine Torque Strut Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.64
$3.84
MSRP $5.64
$3.84
28
Automatic Transmission Mount Audi
Audi Description: 4.0L. 6.3L. 4.2L. A8, S8. Listed under Audi part number 8K0-399-151-CM, this Automatic Transmission Mount controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
29
Suspension Cross-Member Stop Audi
Audi Description: This factory Audi Suspension Cross-Member Stop (8K0-399-291-A) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $15.89
$10.80
MSRP $15.89
$10.80
30
Automatic Transmission Mount Bracket Audi
Audi Description: This genuine Audi Automatic Transmission Mount Bracket, part number 8K0-399-115-BS, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $102.16
$77.53
MSRP $102.16
$77.53