Quarter Panel for 2017 Audi RS3
No.
Part # / Description / Price
Price
1
Inner Side Panel 
Audi
Audi Positions: Left
Description: Sedan/wagon, sedan. Listed under Audi part number 8V5-809-051-TA, this Inner Side Panel forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $887.48
$673.60
MSRP $887.48
$673.60
1
Inner Side Panel Audi
Audi Positions: Right
Description: Sedan/wagon, sedan. Listed under Audi part number 8V5-809-052-TA, this Inner Side Panel forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $931.98
$707.38
MSRP $931.98
$707.38
2
Quarter Panel Reinforcement Audi
Audi Positions: Left
Notes: PARTS: Part included with inner side panel.
Description: Sedan/wagon, sedan. Listed under Audi part number 8V5-810-613, this Quarter Panel Reinforcement forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $183.32
$140.24
MSRP $183.32
$140.24
2
Quarter Panel Reinforcement Audi
Audi Positions: Right
Notes: PARTS: Part included with inner side panel.
Description: Sedan/wagon, sedan. This factory Audi Quarter Panel Reinforcement (8V5-810-614) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $183.32
$140.24
MSRP $183.32
$140.24
2
Quarter Panel Reinforcement Audi
Audi Positions: Rear left upper
Description: Sedan/wagon, sedan. Listed under Audi part number 8V5-810-391, this Quarter Panel Reinforcement forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $159.99
$121.43
MSRP $159.99
$121.43
2
Quarter Panel Reinforcement Audi
Audi Positions: Rear right upper
Description: Sedan/wagon, sedan. Genuine Audi Quarter Panel Reinforcement 8V5-810-392. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $166.65
$126.49
MSRP $166.65
$126.49
3
Quarter Panel Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with inner side panel.
Description: Sedan/wagon, sedan. This genuine Audi Quarter Panel Bracket, part number 8V5-809-507, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $53.58
$35.87
MSRP $53.58
$35.87
3
Quarter Panel Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with inner side panel.
Description: Sedan/wagon, sedan. Listed under Audi part number 8V5-809-868, this Quarter Panel Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $57.58
$38.55
MSRP $57.58
$38.55
4
Side Body Panel Reinforcement Audi
Audi Positions: Left
Description: Sedan/wagon, sedan. Audi part number 8V5-810-569-A, the factory Side Body Panel Reinforcement, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
6
Body C-Pillar Audi
Audi Positions: Left
Description: Sedan/wagon, sedan, upper. This factory Audi Body C-Pillar (8V5-809-745) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $430.00
$326.37
MSRP $430.00
$326.37
6
Body C-Pillar Audi
Audi Positions: Right
Description: Sedan/wagon, sedan, upper. This factory Audi Body C-Pillar (8V5-809-746) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
7
Body C-Pillar Audi
Audi Positions: Left
Description: Sedan/wagon, sedan, lower. Genuine Audi Body C-Pillar 8V5-809-263-B. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $216.66
$165.75
MSRP $216.66
$165.75
7
Body C-Pillar Audi
Audi Positions: Right
Description: Sedan/wagon, sedan, lower. Audi part number 8V5-809-264-B, the factory Body C-Pillar, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
8
Door Lock Striker Plate Audi
Audi Positions: Left
Description: Convertible. 2013-2016. Station wagon. Coupe,. The original equipment Audi Door Lock Striker Plate supplied under part number 4B0-809-237-B manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $23.78
$16.23
MSRP $23.78
$16.23
8
Door Lock Striker Plate Audi
Audi Positions: Rear
Description: A3, S3. Convertible,. Sedan. Wagon. RS3. This genuine Audi Door Lock Striker Plate, part number 3C0-837-033-C, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $74.49
$59.84
MSRP $74.49
$59.84
9
Quarter Panel Reinforcement Audi
Audi Positions: Left
Description: Sedan/wagon, sedan. Listed under Audi part number 8V5-809-305, this Quarter Panel Reinforcement forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $245.00
$187.43
MSRP $245.00
$187.43
9
Quarter Panel Reinforcement Audi
Audi Positions: Right
Description: Sedan/wagon, sedan. Listed under Audi part number 8V5-809-306, this Quarter Panel Reinforcement forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $236.66
$181.05
MSRP $236.66
$181.05
10
Quarter Panel Reinforcement Bracket Audi
Audi Positions: Left
Description: Sedan/wagon, sedan. Genuine Audi Quarter Panel Reinforcement Bracket 8V5-809-801. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
10
Quarter Panel Reinforcement Bracket Audi
Audi Positions: Right
Description: Sedan/wagon, sedan. Audi part number 8V5-809-802, the factory Quarter Panel Reinforcement Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $39.98
$27.29
MSRP $39.98
$27.29
11
Quarter Panel Reinforcement Bracket Audi
Audi Positions: Right
Description: Sedan/wagon, sedan. Audi part number 8V5-810-332, the factory Quarter Panel Reinforcement Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $30.98
$21.14
MSRP $30.98
$21.14
12
Body C-Pillar Baffle Plate Audi
Audi Positions: Left
Description: Sedan/wagon, sedan, upper. This factory Audi Body C-Pillar Baffle Plate (8V5-809-647) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $11.79
$8.01
MSRP $11.79
$8.01
13
Body C-Pillar Baffle Plate Audi
Audi Positions: Left
Description: Sedan/wagon, sedan, inner. Listed under Audi part number 8V5-809-697, this Body C-Pillar Baffle Plate carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $11.79
$8.01
MSRP $11.79
$8.01
14
Body C-Pillar Baffle Plate Audi
Audi Positions: Left
Description: Sedan/wagon, sedan, lower. Genuine Audi Body C-Pillar Baffle Plate 8V5-809-698-A. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $17.48
$11.89
MSRP $17.48
$11.89
15
Wheel Housing Side Panel Audi
Audi Positions: Left
Description: Sedan/wagon, sedan. Audi part number 8V5-809-409-TA, the factory Wheel Housing Side Panel, is a rotating component whose diameter, offset, and load rating are matched to the vehicle's brake package, suspension geometry, and speedometer calibration. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $468.34
$355.47
MSRP $468.34
$355.47
15
Wheel Housing Side Panel Audi
Audi Positions: Right
Description: Sedan/wagon, sedan. The original equipment Audi Wheel Housing Side Panel supplied under part number 8V5-809-410-TA is a rotating component whose diameter, offset, and load rating are matched to the vehicle's brake package, suspension geometry, and speedometer calibration. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $481.66
$365.59
MSRP $481.66
$365.59
16
Quarter Panel Filler Panel Audi
Audi Positions: Left
Notes: PARTS: Part included with outer wheelhouse.
Description: Convertible,. Sedan/wagon, sedan. Listed under Audi part number 8V5-809-347, this Quarter Panel Filler Panel forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $110.32
$83.73
MSRP $110.32
$83.73
16
Quarter Panel Filler Panel Audi
Audi Positions: Right
Notes: PARTS: Part included with outer wheelhouse.
Description: Convertible,. Sedan/wagon, sedan. This genuine Audi Quarter Panel Filler Panel, part number 8V5-809-348, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $110.32
$83.73
MSRP $110.32
$83.73
17
Wheel Housing Side Panel Audi
Audi Positions: Left
Description: Sedan/wagon, sedan. Audi part number 8V5-809-851-TA, the factory Wheel Housing Side Panel, is a rotating component whose diameter, offset, and load rating are matched to the vehicle's brake package, suspension geometry, and speedometer calibration. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $586.67
$445.28
MSRP $586.67
$445.28
17
Wheel Housing Side Panel Audi
Audi Positions: Right
Description: Sedan/wagon, sedan. This genuine Audi Wheel Housing Side Panel, part number 8V5-809-852-TA, is a rotating component whose diameter, offset, and load rating are matched to the vehicle's brake package, suspension geometry, and speedometer calibration. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $650.00
$493.35
MSRP $650.00
$493.35
18
Wheel Housing Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with inner wheelhouse.
Description: Front extn. Convertible,. Sedan, sedan. Wagon. Mount. The original equipment Audi Wheel Housing Bracket supplied under part number 5Q0-802-397 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $16.64
$11.32
MSRP $16.64
$11.32
18
Wheel Housing Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with inner wheelhouse.
Description: Front extn. Convertible,. Sedan, sedan. Wagon. Mount. This factory Audi Wheel Housing Bracket (5Q0-802-398) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $7.30
$4.96
MSRP $7.30
$4.96
19
Wheel Housing Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with inner wheelhouse.
Description: Sedan/wagon, sedan. The original equipment Audi Wheel Housing Bracket supplied under part number 8V5-809-303 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
19
Wheel Housing Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with inner wheelhouse.
Description: Sedan/wagon, sedan. Audi part number 8V5-809-304, the factory Wheel Housing Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
20
Wheel Housing Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with inner wheelhouse.
Description: Coupe. Wagon. Convertible. The original equipment Audi Wheel Housing Bracket supplied under part number 5Q0-802-191 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
20
Wheel Housing Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with inner wheelhouse.
Description: Sedan/wagon, sedan. Audi part number 5Q0-802-192, the factory Wheel Housing Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
21
Wheel Housing Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with mount.
Description: Sedan/wagon, sedan. Genuine Audi Wheel Housing Bracket 5Q0-803-481-B. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
21
Wheel Housing Bracket Audi
Audi Description: Wagon. This factory Audi Wheel Housing Bracket (5Q0-201-827) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.