Trunk for 2017 Audi RS3
No.
Part # / Description / Price
Price
1
Deck Lid 
Audi
Audi Description: Sedan/wagon,. Audi part number 8V5-827-025-F, the factory Deck Lid, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $2,045.65
$1,552.65
MSRP $2,045.65
$1,552.65
2
Deck Lid Drain Plug Audi
Audi Description: 2017-21. 2013-2016. Suv, type 2. Sedan, bottom. Sportback. Convertible. Coupe. This factory Audi Deck Lid Drain Plug (8P4-827-951-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $6.15
$4.19
MSRP $6.15
$4.19
3
Deck Lid Stop Buffer Audi
Audi Positions: Left
Description: Sedan/wagon,. Listed under Audi part number 8V5-827-373, this Deck Lid Stop Buffer forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
3
Deck Lid Stop Buffer Audi
Audi Positions: Right
Description: Sedan/wagon,. This factory Audi Deck Lid Stop Buffer (8V5-827-374) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
4
Deck Lid Stop Buffer Audi
Audi Description: Inner. Trunk lid,buffer. Overslam bumper. Coupe. Sedan/wagon,. Convertible. end. This genuine Audi Deck Lid Stop Buffer, part number 8X0-827-499, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $20.38
$13.91
MSRP $20.38
$13.91
5
Deck Lid Stop Buffer Audi
Audi Positions: Left
Description: Sedan/wagon,. This factory Audi Deck Lid Stop Buffer (8V5-827-377-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
6
Deck Lid Hinge Audi
Audi Positions: Left
Description: Sedan/wagon,. This factory Audi Deck Lid Hinge (8V5-827-301-C) manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $230.00
$175.95
MSRP $230.00
$175.95
6
Deck Lid Hinge Audi
Audi Positions: Right
Description: Sedan/wagon,. Genuine Audi Deck Lid Hinge 8V5-827-302-C. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $230.00
$175.95
MSRP $230.00
$175.95
7
Lower Hinge Mount Bolt Audi
Audi Positions: Right
Description: Listed under Audi part number WHT-001-234, this Lower Hinge Mount Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $4.61
$3.14
MSRP $4.61
$3.14
8
Lift-Gate Lock Striker Plate Nut Audi
Audi Positions: Left
Description: Genuine Audi Lift-Gate Lock Striker Plate Nut N-905-115-05. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
9
Coil Spring Audi
Audi Positions: Right
Description: Sedan/wagon,. Listed under Audi part number 8V5-827-665, this Coil Spring controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
10
Trunk Lid Lift Support Audi
Audi Positions: Left
Description: A3, S3. Sedan/wagon,. RS3. The original equipment Audi Trunk Lid Lift Support supplied under part number 8V5-827-919 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $49.18
$32.93
MSRP $49.18
$32.93
11
Deck Lid Hinge Cap Audi
Audi Positions: Left
Description: Sedan/wagon,. This genuine Audi Deck Lid Hinge Cap, part number 8V5-827-207, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $39.98
$27.29
MSRP $39.98
$27.29
12
Wire Shield Audi
Audi Positions: Left
Description: Sedan/wagon,. This genuine Audi Wire Shield, part number 8V5-971-821, carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $29.32
$24.01
MSRP $29.32
$24.01
13
Deck Lid Hinge Cap Audi
Audi Positions: Right
Description: Sedan/wagon,. Listed under Audi part number 8V5-827-232-9B9, this Deck Lid Hinge Cap manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
13
Deck Lid Hinge Cap Audi
Audi Positions: Left
Description: Sedan/wagon,. Listed under Audi part number 8V5-827-231-9B9, this Deck Lid Hinge Cap manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
14
Deck Lid Hinge Clip Audi
Audi Positions: Right
Description: Sedan/wagon,. The original equipment Audi Deck Lid Hinge Clip supplied under part number 8V5-827-310 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
15
Trunk Lock Actuator Motor Audi
Audi Description: The original equipment Audi Trunk Lock Actuator Motor supplied under part number 4H0-827-505-A conditions and distributes cabin air, where refrigerant charge, airflow path integrity, and actuator calibration together determine whether the system reaches its target temperature. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $271.66
$207.83
MSRP $271.66
$207.83
16
Wiper Arm Nut Audi
Audi Description: Genuine Audi Wiper Arm Nut N-106-092-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.14
$2.14
MSRP $3.14
$2.14
17
Deck Lid Latch Cover Audi
Audi Description: Convertible,. Sedan,. Listed under Audi part number 4H0-827-520, this Deck Lid Latch Cover manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $9.23
$6.27
MSRP $9.23
$6.27
18
Trunk Lid Release Switch Audi
Audi Description: A3, S3. Sedan/wagon, with rear camera. To 09/26/2016. RS3. This genuine Audi Trunk Lid Release Switch, part number 8V0-827-566-B, presents vehicle information to the driver or accepts driver input, so its display, backlighting, and switch contacts are the interface between the operator and the vehicle's electronics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
19
Exterior Door Handle Cover Audi
Audi Description: Sedan/wagon,. Audi part number 4G5-827-229, the factory Exterior Door Handle Cover, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $12.97
$7.78
MSRP $12.97
$7.78
20
Deck Lid Stop Buffer Audi
Audi Description: Convertible,. Sedan/wagon,. Outer. This genuine Audi Deck Lid Stop Buffer, part number 4G5-827-797, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $7.18
$4.88
MSRP $7.18
$4.88
21
Deck Lid Stop Buffer Audi
Audi Description: Convertible,. Sedan/wagon,. This genuine Audi Deck Lid Stop Buffer, part number 4GD-827-127, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.64
$3.84
MSRP $5.64
$3.84
22
License Plate Bracket Audi
Audi Description: Convertible,. Sedan,. The original equipment Audi License Plate Bracket supplied under part number 8V5-827-113-B-9B9 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $216.66
$165.75
MSRP $216.66
$165.75
23
License Plate Bracket Insulator Audi
Audi Description: Sedan,. Convertible,. Coupe. This factory Audi License Plate Bracket Insulator (8D0-853-419-F) finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $24.78
$16.91
MSRP $24.78
$16.91
24
Deck Lid Seal Audi
Audi Description: Sedan/wagon,. This genuine Audi Deck Lid Seal, part number 8V5-827-705-E, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $266.67
$204.00
MSRP $266.67
$204.00
25
Deck Lid Striker Audi
Audi Description: A3. Convertible,. A8 Quattro. RS3. S8. Genuine Audi Deck Lid Striker 8V5-827-507. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $60.32
$48.46
MSRP $60.32
$48.46