Bumper for 2017 Audi RS7
No.
Part # / Description / Price
Price
1
Bumper Cover 
Audi
Audi Description: RS7. RS7 Cover & Brackets.
Fits RS7, RS7 Sportback, S7 Sportback
RS7. RS7, Cover & Brackets. RS7, Cover & Brackets. Genuine Audi Bumper Cover 4G8-807-067-AK-GRU. This original equipment component forms part of the vehicle's visible exterior surface, s ...
MSRP $4,883.48
$3,809.12
MSRP $4,883.48
$3,809.12
2
Fender Liner Screw Audi
Audi Description: Audi part number N-910-570-01, the factory Fender Liner Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.59
$2.43
MSRP $3.59
$2.43
5
Tow Eye Cap Audi
Audi Notes: PARTS: Part included with bumper cover.
Description: RS7. This genuine Audi Tow Eye Cap, part number 4G8-807-441-B-GRU, is a genuine Audi accessory engineered to the vehicle's mounting points and load limits, so it fits without drilling and carries a defined capacity rating. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $88.65
$67.29
MSRP $88.65
$67.29
6
Bumper Cover Bracket Audi
Audi Positions: Left
Description: A7 without prestige pkg. A7 without s-line pkg, cover & brackets. A7 with s-line pkg, S7, cover & brackets. A7 with prestige pkg, S7. RS7. Audi part number 4G8-807-863, the factory Bumper Cover Bracket, is a small but load bearing element of the assembly, ...
MSRP $29.98
$20.46
MSRP $29.98
$20.46
6
Bumper Cover Bracket Audi
Audi Positions: Right
Description: A7 without prestige pkg. A7 without s-line pkg, cover & brackets. A7 with s-line pkg, S7, cover & brackets. A7 with prestige pkg, S7. RS7. Genuine Audi Bumper Cover Bracket 4G8-807-864. This original equipment component is a small but load bearing element ...
MSRP $29.98
$20.46
MSRP $29.98
$20.46
7
Bumper Cover Spacer Panel Audi
Audi Description: A7 with prestige pkg, S7. A7 without prestige pkg. RS7. Listed under Audi part number 4G8-807-421-9B9, this Bumper Cover Spacer Panel forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $286.66
$219.30
MSRP $286.66
$219.30
8
Valance Panel Audi
Audi Description: RS7, aluminum. The original equipment Audi Valance Panel supplied under part number 4G8-807-521-T-AP6 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $2,143.33
$1,626.79
MSRP $2,143.33
$1,626.79
8
Valance Panel Audi
Audi Description: RS7, cover & brackets, titanium gray. Listed under Audi part number 4G8-807-521-T-MI7, this Valance Panel forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1,460.00
$1,108.14
MSRP $1,460.00
$1,108.14
8
Valance Panel Audi
Audi Description: RS7, black. The original equipment Audi Valance Panel supplied under part number 4G8-807-521-T-Y9B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $1,066.67
$809.60
MSRP $1,066.67
$809.60
8
Valance Panel Audi
Audi Positions: Rear lower
Description: RS7, carbon. This factory Audi Valance Panel (4G8-807-521-K) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $10,717.64
$8,134.70
MSRP $10,717.64
$8,134.70
10
Quarter Panel Splash Shield Screw Audi
Audi Description: Genuine Audi Quarter Panel Splash Shield Screw N-907-750-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
11
Bumper Cover Support Rail Nut Audi
Audi Description: This factory Audi Bumper Cover Support Rail Nut (N-105-962-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.24
$2.20
MSRP $3.24
$2.20
12
Bumper Trim Audi
Audi Notes: PARTS: Part included with lower panel.
Description: RS7, cover & brackets, titanium. Listed under Audi part number 4G8-807-731-GRU, this Bumper Trim forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $1,793.99
$1,588.57
MSRP $1,793.99
$1,588.57
12
Bumper Trim Audi
Audi Positions: Front
Description: The original equipment Audi Bumper Trim supplied under part number 4G8-807-717-B-AP6 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $913.34
$693.22
MSRP $913.34
$693.22
12
Bumper Trim Audi
Audi Positions: Front
Description: RS7, cover & brackets, titanium gray. Audi part number 4G8-807-717-B-MI7, the factory Bumper Trim, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $791.67
$600.88
MSRP $791.67
$600.88
12
Bumper Trim Audi
Audi Positions: Front
Description: The original equipment Audi Bumper Trim supplied under part number 4G8-807-717-C forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $6,596.48
$5,006.73
MSRP $6,596.48
$5,006.73
13
Bumper Impact Strip Clip Audi
Audi Description: RS7. Audi part number 4G8-807-900, the factory Bumper Impact Strip Clip, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $35.18
$24.01
MSRP $35.18
$24.01
14
Park Assist Camera Screw Audi
Audi Description: Camera and components. Coupe. With s-line. Convertible, rear camera. 4.2L. RS7. Audi part number N-909-159-01, the factory Park Assist Camera Screw, is a small but load bearing element of the assembly, and using the factory specification matters because t ...
MSRP $0.30
$0.20
MSRP $0.30
$0.20
15
Bumper Impact Strip Clip Audi
Audi Description: 2016-18 A6, with s-line type S6 cover & componants. Without s-line type, cover & componants. RS7. Listed under Audi part number 4E0-971-847, this Bumper Impact Strip Clip is a small but load bearing element of the assembly, and using the factory specifica ...
MSRP $8.23
$6.70
MSRP $8.23
$6.70
16
End Plate Audi
Audi Positions: Left
Description: RS7. This genuine Audi End Plate, part number 4G8-807-319-A, is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $154.31
$117.13
MSRP $154.31
$117.13
16
End Plate Audi
Audi Positions: Right
Description: RS7. Genuine Audi End Plate 4G8-807-320-A. This original equipment component is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $143.31
$108.78
MSRP $143.31
$108.78
17
Fender Liner Extension Bolt Audi
Audi Positions: Left
Description: This factory Audi Fender Liner Extension Bolt (N-907-758-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.56
$1.74
MSRP $2.56
$1.74
18
Air Inlet Duct U-Nut Audi
Audi Positions: Left
Description: The original equipment Audi Air Inlet Duct U-Nut supplied under part number N-015-437-4 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
19
Bumper Impact Bar Audi
Audi Description: A7 with prestige pkg, S7. A7 with s-line pkg, S7, cover & brackets. RS7. The original equipment Audi Bumper Impact Bar supplied under part number 4G8-807-309-C forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point ...
MSRP $1,262.49
$958.22
MSRP $1,262.49
$958.22
20
Bumper Impact Bar Gasket Audi
Audi Positions: Left
Description: 2012-15, A6, without s-line pkg. S6, bracket & components. A7 without s-line pkg, cover & brackets. A7 with s-line pkg, S7, cover & brackets. 2012-15, A6, with s-line pkg, S6. RS7. 2016-18 A6 without s-line type bracket & components. Audi part number 4G0- ...
MSRP $16.40
$11.15
MSRP $16.40
$11.15
20
Bumper Impact Bar Gasket Audi
Audi Positions: Right
Description: 2012-15, A6, without s-line pkg. S6, bracket & components. A7 without s-line pkg, cover & brackets. A7 with s-line pkg, S7, cover & brackets. 2012-15, A6, with s-line pkg, S6. RS7. 2016-18 A6 without s-line type bracket & components. Audi part number 4G0- ...
MSRP $16.40
$11.15
MSRP $16.40
$11.15
21
Side Member Assembly Bolt Audi
Audi Description: This genuine Audi Side Member Assembly Bolt, part number N-019-530-8, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.08
$6.17
MSRP $9.08
$6.17
21
Radiator Mount Bolt Audi
Audi Description: Audi part number 8K0-805-399-B, the factory Radiator Mount Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
21
Bumper Impact Bar Bolt Audi
Audi Description: This factory Audi Bumper Impact Bar Bolt (N-100-362-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $14.88
$10.12
MSRP $14.88
$10.12
22
Impact Bar Nut Audi
Audi Description: This factory Audi Impact Bar Nut (N-103-401-03) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.13
$3.48
MSRP $5.13
$3.48
22
Bumper Impact Bar Nut Audi
Audi Description: The original equipment Audi Bumper Impact Bar Nut supplied under part number N-023-003-11 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.55
$2.42
MSRP $3.55
$2.42
23
Bumper Cover Support Rail Audi
Audi Positions: Left
Description: A7 with prestige pkg, S7. RS7. This genuine Audi Bumper Cover Support Rail, part number 4G8-807-453-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $54.78
$36.68
MSRP $54.78
$36.68
23
Bumper Cover Support Rail Audi
Audi Positions: Right
Description: A7 with prestige pkg, S7. RS7. This factory Audi Bumper Cover Support Rail (4G8-807-454-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $54.78
$36.68
MSRP $54.78
$36.68
24
Bumper Cover Support Rail Bolt Audi
Audi Positions: Left
Description: Listed under Audi part number N-909-059-03, this Bumper Cover Support Rail Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $11.26
$7.66
MSRP $11.26
$7.66
25
Bumper Guide Audi
Audi Positions: Left
Description: A7 with s-line pkg, S7, cover & brackets. A7 without prestige pkg. A7 with prestige pkg, S7. RS7. This factory Audi Bumper Guide (4G8-807-889) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $15.22
$10.35
MSRP $15.22
$10.35
25
Bumper Guide Audi
Audi Positions: Right
Description: A7 with prestige pkg, S7. A7 without s-line pkg, cover & brackets. A7 with s-line pkg, S7, cover & brackets. RS7. A7 without prestige pkg. This factory Audi Bumper Guide (4G8-807-890) forms part of the vehicle's visible exterior surface, so panel gap, con ...
MSRP $15.22
$10.35
MSRP $15.22
$10.35
26
Hood Release Cable Bolt Audi
Audi Description: Genuine Audi Hood Release Cable Bolt N-909-995-03. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
27
Bumper Cover Support Rail Audi
Audi Description: A7 with s-line pkg, S7, cover & brackets. A7 without prestige pkg. A7 with prestige pkg, S7. RS7. This factory Audi Bumper Cover Support Rail (4G8-807-381) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $51.98
$34.80
MSRP $51.98
$34.80
28
Fender Liner Nut Audi
Audi Description: Listed under Audi part number WHT-003-207, this Fender Liner Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.72
$2.53
MSRP $3.72
$2.53