Exhaust Components for 2017 Audi RS7
No.
Part # / Description / Price
Price
1
Catalytic Converter 1 
Audi
Audi Positions: Right
Description: A8. 4.0l. Left. RS7. Cylinder 5-8. S7. S6. S8. 4.0L, mufflers & pipes, from 11/5/12. Cylinder 1-4. 4.0L, mufflers & pipes, to 11/2/12. Listed under Audi part number 4G0-254-202-NX, this Catalytic Converter keeps the exhaust and evaporative streams within ...
2
Catalytic Converter 1 Audi
Audi Positions: Left
Description: A8. 4.0l. Right. RS7. Cylinder 1-4. S7. S6. S8. 4.0L, mufflers & pipes, from 11/5/12. Cylinder 5-8. 4.0L, mufflers & pipes, to 11/2/12. This factory Audi Catalytic Converter (4G0-254-252-LX) keeps the exhaust and evaporative streams within regulated limit ...
3
Turbocharger Gasket Audi
Audi Positions: Left
Description: 4.0L, mufflers & pipes. Listed under Audi part number 4G0-253-115-D, this Turbocharger Gasket creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $46.38
$31.05
MSRP $46.38
$31.05
3
Gasket Audi
Audi Positions: Rear
Description: This genuine Audi Gasket, part number 8K0-253-115-K, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $5.52
$3.75
MSRP $5.52
$3.75
4
Converter & Pipe Lock Nut Audi
Audi Positions: Left
Description: This genuine Audi Converter & Pipe Lock Nut, part number N-911-308-02, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.76
$2.56
MSRP $3.76
$2.56
5
Bracket Audi
Audi Positions: Left
Description: The original equipment Audi Bracket supplied under part number 8K0-253-376-B is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $45.58
$30.52
MSRP $45.58
$30.52
5
Exhaust System Hanger Bracket Audi
Audi Description: 2012-15. 2016-18, front. Gas. 6.3L. 4.2L. 3.0L diesel. Genuine Audi Exhaust System Hanger Bracket 4H0-253-099-A. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thr ...
MSRP $65.00
$52.22
MSRP $65.00
$52.22
5
Exhaust System Hanger Bracket Audi
Audi Description: The original equipment Audi Exhaust System Hanger Bracket supplied under part number 8K0-253-144-E is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $73.33
$58.92
MSRP $73.33
$58.92
5
Exhaust System Hanger Bracket Audi
Audi Description: Audi part number 8K0-253-144-M, the factory Exhaust System Hanger Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $123.32
$93.61
MSRP $123.32
$93.61
5
Exhaust System Hanger Bracket Audi
Audi Description: Audi part number 8K0-253-295, the factory Exhaust System Hanger Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $38.11
$26.02
MSRP $38.11
$26.02
6
Exhaust System Hanger Bolt Audi
Audi Positions: Left
Description: This factory Audi Exhaust System Hanger Bolt (N-100-493-08) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $4.86
$3.30
MSRP $4.86
$3.30
7
Exhaust Manifold Bracket Audi
Audi Positions: Right
Description: 4.0L. 2007-11. This genuine Audi Exhaust Manifold Bracket, part number 4F0-253-295-A, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $58.98
$39.49
MSRP $58.98
$39.49
8
Exhaust System Hanger Bolt Audi
Audi Positions: Left
Description: Genuine Audi Exhaust System Hanger Bolt N-040-301-6. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $5.64
$3.84
MSRP $5.64
$3.84
8
Exhaust System Hanger Bolt Audi
Audi Description: Audi part number N-010-244-26, the factory Exhaust System Hanger Bolt, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1.40
$0.95
MSRP $1.40
$0.95
9
Washer Audi
Audi Positions: Left
Description: This genuine Audi Washer, part number N-011-670-26, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.46
$2.35
MSRP $3.46
$2.35
10
Exhaust Manifold Bolt And Spring Audi
Audi Positions: Left
Description: Audi part number 893-253-353, the factory Exhaust Manifold Bolt And Spring, delivers metered, filtered air to the combustion chambers, and any unmetered air or restriction on this path shifts fuel trims and dulls throttle response. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $28.87
$19.71
MSRP $28.87
$19.71
11
Exhaust System Hanger Sleeve Audi
Audi Positions: Left
Description: This genuine Audi Exhaust System Hanger Sleeve, part number 4B0-253-205-C, routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $13.84
$9.41
MSRP $13.84
$9.41
12
Exhaust System Hanger Insulator Audi
Audi Positions: Left
Description: Genuine Audi Exhaust System Hanger Insulator 4A0-253-149-B. This original equipment component routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $23.06
$15.74
MSRP $23.06
$15.74
14
Exhaust System Hanger Spacer Audi
Audi Positions: Left
Description: Audi part number 4B0-253-205-D, the factory Exhaust System Hanger Spacer, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $25.40
$17.34
MSRP $25.40
$17.34
15
Exhaust Pipe Audi
Audi Positions: Right
Description: S6. Front. Cylinder 1-4. 4.0L. RS7. Right. S7. Audi part number 4G0-254-350-K, the factory Exhaust Pipe, routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $828.49
$628.82
MSRP $828.49
$628.82
16
Exhaust Pipe Audi
Audi Positions: Left
Description: S6. Front. Cylinder 5-8. 4.0L. RS7. Left. S7. Right. This genuine Audi Exhaust Pipe, part number 4G0-254-300-K, routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $798.45
$656.52
MSRP $798.45
$656.52
19
Exhaust Muffler Audi
Audi Description: 4.0L, mufflers & pipes, with RS7. The original equipment Audi Exhaust Muffler supplied under part number 4G0-253-409-BJ routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
20
Exhaust Tail Pipe Clamp Audi
Audi Positions: Left
Description: Listed under Audi part number 1K0-253-141-H, this Exhaust Tail Pipe Clamp is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $53.78
$36.01
MSRP $53.78
$36.01
21
Exhaust System Hanger Bracket Audi
Audi Positions: Right
Description: 2012-15. 2016-18, rear. 3.0L gas. 4.0L mufflers & pipes. 3.0L diesel. This genuine Audi Exhaust System Hanger Bracket, part number 4G0-253-144-B, is a small but load bearing element of the assembly, and using the factory specification matters because thre ...
MSRP $54.32
$43.64
MSRP $54.32
$43.64
22
Exhaust System Hanger Bracket Audi
Audi Positions: Left
Description: Audi part number 8K0-253-144-F, the factory Exhaust System Hanger Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $96.49
$73.23
MSRP $96.49
$73.23
23
Exhaust Muffler Audi
Audi Positions: Right
Description: Rear. Right. 4.0L, mufflers & pipes, with RS7. Genuine Audi Exhaust Muffler 4G0-253-610-CM. This original equipment component routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1,547.84
$1,370.61
MSRP $1,547.84
$1,370.61
24
Exhaust Muffler Audi
Audi Positions: Left
Description: Rear. Left. 4.0L, mufflers & pipes, with RS7. This factory Audi Exhaust Muffler (4G0-253-609-CN) routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
26
Exhaust Control Valve Actuator Audi
Audi Positions: Left
Notes: PARTS: Part included with rear muffler.
Description: 4.0L, mufflers & pipes. 2.0L, tts. Gas. With hybrid. 2.0L, TT. 2.0L 2016-18 rear. Servo. Audi part number 4H0-133-246-J, the factory Exhaust Control Valve Actuator, routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $395.82
$299.24
MSRP $395.82
$299.24
27
Exhaust Control Valve Actuator Nut Audi
Audi Positions: Left
Notes: PARTS: Part included with rear muffler.
Description: This factory Audi Exhaust Control Valve Actuator Nut (N-105-972-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $0.98
$0.67
MSRP $0.98
$0.67
29
Exhaust Tail Pipe Tip Audi
Audi Positions: Left
Description: 4.0L, mufflers & pipes, with RS7, chrome. This genuine Audi Exhaust Tail Pipe Tip, part number 4G8-253-823, routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
29
Exhaust Tail Pipe Tip Audi
Audi Positions: Left
Description: RS7. Left. This factory Audi Exhaust Tail Pipe Tip (4G8-253-823-A) routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $636.15
$482.84
MSRP $636.15
$482.84
29
Exhaust Tail Pipe Tip Audi
Audi Positions: Right
Description: 4.0L, mufflers & pipes, with RS7, chrome. This factory Audi Exhaust Tail Pipe Tip (4G8-253-824) routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
29
Exhaust Tail Pipe Tip Audi
Audi Positions: Right
Description: RS7. Right. The original equipment Audi Exhaust Tail Pipe Tip supplied under part number 4G8-253-824-A routes and tunes exhaust gas from the engine to the tailpipe, where sealing integrity affects both sensor accuracy and cabin noise levels. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
1 This price excludes a refundable manufacturer's core charge. Add the part to your cart to see the core charge.