Control Cables for 2023 Audi e-tron S Sportback
No.
Part # / Description / Price
Price
1
Fender Filler Panel 
Audi
Audi Positions: Right
Description: Audi part number 4KE-821-942-A, the factory Fender Filler Panel, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $74.15
$59.57
MSRP $74.15
$59.57
1
Fender Filler Panel Audi
Audi Positions: Left
Description: Audi part number 4KE-821-941-A, the factory Fender Filler Panel, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $74.15
$59.57
MSRP $74.15
$59.57
2
Rear Cover Clip Audi
Audi Positions: Left
Notes: PARTS: Part included with rear cover.
Description: Rear cover,clip. Listed under Audi part number 4KE-805-163, this Rear Cover Clip is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $10.71
$7.29
MSRP $10.71
$7.29
3
Seat Hinge Cover Audi
Audi Positions: Right
Notes: PARTS: Part included with rear cover.
Description: This factory Audi Seat Hinge Cover (4KE-821-943) forms part of the factory seat assembly, where foam density, cover tension, and mounting geometry all work together to hold the occupant in the position Audi engineered for comfort and restraint performance. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $65.99
$53.01
MSRP $65.99
$53.01
4
End Plate Rivet Audi
Audi Positions: Left
Description: Listed under Audi part number N-905-584-01, this End Plate Rivet is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $0.92
$0.63
MSRP $0.92
$0.63
5
Fender Filler Panel Audi
Audi Positions: Right
Description: This genuine Audi Fender Filler Panel, part number 4KE-805-284-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $120.82
$91.70
MSRP $120.82
$91.70
5
Fender Filler Panel Audi
Audi Positions: Left
Description: This genuine Audi Fender Filler Panel, part number 4KE-805-283-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $122.49
$92.96
MSRP $122.49
$92.96
6
Front Cover Cover Audi
Audi Positions: Left
Notes: PARTS: Part included with front cover.
Description: Listed under Audi part number 4KE-805-700, this Front Cover Cover encloses and protects the component behind it, keeping debris, moisture, and heat away from hardware that was not designed to be exposed while also finishing the visible surface. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
8
Lock & Switch Audi
Audi Positions: Left
Description: To 04/10/2023. E-tron Quattro. From 04/10/2023. Q8 e-tron. SQ8 e-tron. Listed under Audi part number 4KE-823-509-A, this Lock & Switch presents vehicle information to the driver or accepts driver input, so its display, backlighting, and switch contacts are the interface between the operator and the vehicle's electronics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $211.43
$188.70
MSRP $211.43
$188.70
9
Lock & Switch Bolt Audi
Audi Positions: Right
Description: Lock and cables. 2013-2016. Convertible,. This genuine Audi Lock & Switch Bolt, part number N-911-463-01, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.10
$2.79
MSRP $4.10
$2.79
10
Drive Motor Battery Pack Charging Port Assembly Bracket Audi
Audi Positions: Left
Description: Rear camera,retainer brkt. 2017-25. Convertible,. High voltage charging socket. Coupe,. Camera system. This genuine Audi Drive Motor Battery Pack Charging Port Assembly Bracket, part number 3B0-919-136-A, is a small but load bearing element of the assembl ...
MSRP $9.32
$7.60
MSRP $9.32
$7.60
11
Hood Contact Switch Audi
Audi Positions: Right
Notes: PARTS: Part included with lock & switch.
Description: 2017-21. Q3. Sedan/wagon, sedan. Coupe,. Convertible,. The original equipment Audi Hood Contact Switch supplied under part number 8D0-973-822 presents vehicle information to the driver or accepts driver input, so its display, backlighting, and switch contacts are the interface between the operator and the vehicle's electronics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $13.21
$10.78
MSRP $13.21
$10.78
12
Hood Release Cable Audi
Audi Description: E-tron Quattro. From release. E-tron Sportback. Release cable. Audi part number 4KL-823-535-B, the factory Hood Release Cable, carries power and signal between components, and since most electrical faults trace to connections rather than to the components ...
MSRP $89.31
$67.79
MSRP $89.31
$67.79
13
Hood Release Cable Clip Audi
Audi Description: Audi part number 1T0-823-567, the factory Hood Release Cable Clip, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $9.25
$6.28
MSRP $9.25
$6.28
14
Hood Release Cable Audi
Audi Description: This genuine Audi Hood Release Cable, part number 4KE-823-529-B, carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $44.98
$30.11
MSRP $44.98
$30.11
15
Hood Release Cable Clip Audi
Audi Description: Without TT rs. Convertible,. Sedan. Release cable,clip. 2017-21. 2013-2016. Wagon. #1. Coupe,. Release cable,retainer. This factory Audi Hood Release Cable Clip (N-906-539-01) is a small but load bearing element of the assembly, and using the factory spec ...
MSRP $3.95
$2.68
MSRP $3.95
$2.68
16
Hybrid / Electric Vehicle Sound Alert Speaker Bracket Bolt Audi
Audi Description: The original equipment Audi Hybrid / Electric Vehicle Sound Alert Speaker Bracket Bolt supplied under part number N-909-995-02 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
17
Hood Release Handle Audi
Audi Description: Lever. This factory Audi Hood Release Handle (4M0-823-661-D) manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $15.89
$10.80
MSRP $15.89
$10.80
18
Hood Release Cable Audi
Audi Description: E-tron Quattro. Center cable. E-tron Sportback. From latch. Audi part number 4KE-823-531-B, the factory Hood Release Cable, carries power and signal between components, and since most electrical faults trace to connections rather than to the components themselves, harness integrity is fundamental to system reliability. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $58.48
$46.99
MSRP $58.48
$46.99
19
Hood Release Cable Clip Audi
Audi Description: Convertible,. Sedan. 2017-21. Lock and cables. Wagon. Coupe,. The original equipment Audi Hood Release Cable Clip supplied under part number 4H0-823-543 is a small but load bearing element of the assembly, and using the factory specification matters becau ...
MSRP $11.50
$7.82
MSRP $11.50
$7.82
20
Hood Release Handle Audi
Audi Description: From 09/2018, black. Audi part number 4K1-823-533-C-4PK, the factory Hood Release Handle, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $59.98
$40.16
MSRP $59.98
$40.16
21
Hood Release Handle Bracket Audi
Audi Description: Listed under Audi part number 4KL-823-633-B, this Hood Release Handle Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $37.50
$25.59
MSRP $37.50
$25.59
22
Blind Spot Detection System Warning Sensor Bolt Audi
Audi Notes: PARTS: Part included with mount bracket.
Description: Genuine Audi Blind Spot Detection System Warning Sensor Bolt N-909-059-02. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $2.78
$1.89
MSRP $2.78
$1.89
23
Quarter Panel Splash Shield Screw Audi
Audi Description: Genuine Audi Quarter Panel Splash Shield Screw N-907-750-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
24
Hood Release Handle Nut Audi
Audi Description: Front bracket,nut. Sedan. 2009-13. Wagon. 2013-2016. 2008-10. Coupe. 2006-08. Convertible. With TT rs. Genuine Audi Hood Release Handle Nut N-910-383-01. This original equipment component is a small but load bearing element of the assembly, and using the ...
MSRP $4.61
$3.14
MSRP $4.61
$3.14