Structural Components & Rails for 2023 Audi e-tron S Sportback
No.
Part # / Description / Price
Price
1
Frame Side Member Assembly 
Audi
Audi Positions: Left
Description: The original equipment Audi Frame Side Member Assembly supplied under part number 4KE-803-091 carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
1
Frame Side Member Assembly Audi
Audi Positions: Right
Description: Listed under Audi part number 4KE-803-092, this Frame Side Member Assembly carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
2
Frame Rail End Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: Audi part number 4KE-802-158, the factory Frame Rail End, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
2
Frame Rail End Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: Genuine Audi Frame Rail End 4KE-803-647. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
3
Fender Filler Panel Audi
Audi Positions: Right
Notes: PARTS: Part included with sidemember assembly.
Description: The original equipment Audi Fender Filler Panel supplied under part number 4KE-805-304 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
3
Fender Filler Panel Audi
Audi Positions: Left
Notes: PARTS: Part included with sidemember assembly.
Description: This factory Audi Fender Filler Panel (4KE-805-303) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
4
Sound Absorber Audi
Audi Positions: Left
Description: Listed under Audi part number 4KE-864-741, this Sound Absorber finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $14.57
$11.89
MSRP $14.57
$11.89
4
Sound Absorber Audi
Audi Positions: Right
Description: This genuine Audi Sound Absorber, part number 4KE-864-742, finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
5
Fender Apron Audi
Audi Positions: Right
Description: Audi part number 4KE-805-140-A, the factory Fender Apron, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $975.38
$802.01
MSRP $975.38
$802.01
5
Fender Apron Audi
Audi Positions: Left
Description: Listed under Audi part number 4KE-805-139-A, this Fender Apron forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $992.30
$815.91
MSRP $992.30
$815.91
6
Fender Apron Reinforcement Audi
Audi Positions: Right
Description: This factory Audi Fender Apron Reinforcement (4KE-805-030) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $386.67
$295.80
MSRP $386.67
$295.80
6
Fender Apron Reinforcement Audi
Audi Positions: Left
Description: Listed under Audi part number 4KE-805-029, this Fender Apron Reinforcement forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $331.66
$253.71
MSRP $331.66
$253.71
7
Frame Side Member Audi
Audi Positions: Right
Description: This factory Audi Frame Side Member (4KE-803-104-A) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
7
Frame Side Member Audi
Audi Positions: Left
Description: This genuine Audi Frame Side Member, part number 4KE-803-103-A, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
8
Fender Closing Plate Audi
Audi Positions: Right
Description: Genuine Audi Fender Closing Plate 4KE-805-678. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $109.99
$83.48
MSRP $109.99
$83.48
8
Fender Closing Plate Audi
Audi Positions: Left
Description: Genuine Audi Fender Closing Plate 4KE-805-677. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $109.99
$83.48
MSRP $109.99
$83.48
9
Rear Body Panel Stud Audi
Audi Positions: Left
Description: The original equipment Audi Rear Body Panel Stud supplied under part number N-906-526-02 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $2.78
$1.89
MSRP $2.78
$1.89
10
Air Bag Control Module Nut Audi
Audi Positions: Left
Description: Audi part number WHT-000-868, the factory Air Bag Control Module Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $5.76
$3.92
MSRP $5.76
$3.92
10
Floor Pan Stud Audi
Audi Description: Weld-type 1. M8. Genuine Audi Floor Pan Stud WHT-006-925. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $8.34
$5.67
MSRP $8.34
$5.67
10
ABS Modulator Bolt Audi
Audi Description: Genuine Audi ABS Modulator Bolt N-910-382-02. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $0.30
$0.20
MSRP $0.30
$0.20
10
Battery Cable Terminal End Nut Audi
Audi Description: Chassis control unit. Floor. 2.0L or 3.0L, m8x20. Coupe. 2.0L plug-in hybrid. 12 volt, A3. 2013-2016. Cowl panel,bolt. Convertible. This factory Audi Battery Cable Terminal End Nut (WHT-000-869) is a small but load bearing element of the assembly, and usi ...
MSRP $9.58
$6.51
MSRP $9.58
$6.51
14
Suspension Subframe Crossmember Audi
Audi Positions: Left
Description: Listed under Audi part number 4KE-805-851-A, this Suspension Subframe Crossmember carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $138.32
$104.98
MSRP $138.32
$104.98
14
Frame Side Member Crossmember Audi
Audi Positions: Right
Description: Right. This genuine Audi Frame Side Member Crossmember, part number 4KE-805-852-A, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $138.32
$104.98
MSRP $138.32
$104.98
15
Frame Rail End Bracket Audi
Audi Positions: Left
Description: Audi part number 4KE-801-137, the factory Frame Rail End Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $35.18
$24.01
MSRP $35.18
$24.01
15
Frame Rail End Bracket Audi
Audi Positions: Right
Description: Audi part number 4KE-801-138, the factory Frame Rail End Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $35.18
$24.01
MSRP $35.18
$24.01
16
Fender Apron Bracket Audi
Audi Positions: Right
Description: Listed under Audi part number 4KE-803-504, this Fender Apron Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $136.48
$103.59
MSRP $136.48
$103.59
16
Fender Apron Bracket Audi
Audi Positions: Left
Description: Audi part number 4KE-803-503, the factory Fender Apron Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $136.48
$103.59
MSRP $136.48
$103.59
17
Frame Side Member Cross-Member Audi
Audi Description: Front. This factory Audi Frame Side Member Cross-Member (4KE-805-844) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
18
Frame Side Member Cross-Member Audi
Audi Description: Rear from 11/28/2022. The original equipment Audi Frame Side Member Cross-Member supplied under part number 4KE-805-341-B carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
19
Fender Reinforcement Bar Audi
Audi Positions: Left
Description: Fender. Genuine Audi Fender Reinforcement Bar 4KE-810-055-B. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $67.82
$54.48
MSRP $67.82
$54.48
19
Fender Reinforcement Bar Audi
Audi Positions: Right
Description: Fender. Listed under Audi part number 4KE-810-056-B, this Fender Reinforcement Bar forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $67.82
$54.48
MSRP $67.82
$54.48