Cowl for 2023 Audi Q4 e-tron
No.
Part # / Description / Price
Price
1
Cowl Cover 
Audi
Audi Description: Listed under Audi part number 11B-819-403-B-9B9, this Cowl Cover carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $70.82
$56.89
MSRP $70.82
$56.89
2
Cowl Cover Seal Audi
Audi Description: The original equipment Audi Cowl Cover Seal supplied under part number 11A-823-723 creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $12.42
$8.45
MSRP $12.42
$8.45
3
Cabin Air Intake Duct Audi
Audi Description: This genuine Audi Cabin Air Intake Duct, part number 1EB-815-479-B, delivers metered, filtered air to the combustion chambers, and any unmetered air or restriction on this path shifts fuel trims and dulls throttle response. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $27.18
$18.55
MSRP $27.18
$18.55
4
Cowl Grille Screen Audi
Audi Description: This factory Audi Cowl Grille Screen (1EB-819-060-B) presents vehicle information to the driver or accepts driver input, so its display, backlighting, and switch contacts are the interface between the operator and the vehicle's electronics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $32.38
$22.10
MSRP $32.38
$22.10
5
Cabin Air Intake Duct Audi
Audi Description: Listed under Audi part number 89B-858-431, this Cabin Air Intake Duct delivers metered, filtered air to the combustion chambers, and any unmetered air or restriction on this path shifts fuel trims and dulls throttle response. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $91.65
$69.56
MSRP $91.65
$69.56
6
Instrument Panel Air Duct Bracket Audi
Audi Description: Genuine Audi Instrument Panel Air Duct Bracket 89A-819-081. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $14.44
$9.82
MSRP $14.44
$9.82
7
Humidity Sensor Audi
Audi Description: Audi part number 3Q0-907-643-C, the factory Humidity Sensor, converts a physical condition into a signal the engine control module uses to set fueling and timing, so a drifting sensor degrades performance long before it triggers a hard fault. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $83.52
$63.39
MSRP $83.52
$63.39
8
Cowl Panel Audi
Audi Description: Audi part number 11A-802-483-A, the factory Cowl Panel, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $223.32
$170.84
MSRP $223.32
$170.84
9
Cowl Bracket Audi
Audi Positions: Left
Notes: PARTS: Part included with cowl panel.
Description: This genuine Audi Cowl Bracket, part number 11A-805-327, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $25.18
$17.19
MSRP $25.18
$17.19
9
Cowl Bracket Audi
Audi Positions: Right
Notes: PARTS: Part included with cowl panel.
Description: Audi part number 11A-805-328, the factory Cowl Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $20.18
$13.77
MSRP $20.18
$13.77
10
Cowl Bracket Audi
Audi Notes: PARTS: Part included with cowl panel.
Description: This genuine Audi Cowl Bracket, part number 11A-805-217, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $20.58
$14.05
MSRP $20.58
$14.05
11
Engine Mount Audi
Audi Positions: Left
Description: Audi part number 11A-804-413-A, the factory Engine Mount, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $9.60
$6.53
MSRP $9.60
$6.53
12
Firewall Audi
Audi Description: This genuine Audi Firewall, part number 1EA-805-265-A, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $173.32
$132.59
MSRP $173.32
$132.59
13
Bracket Audi
Audi Description: Bracket. Convertible,. Sedan/wagon,. This genuine Audi Bracket, part number 1K0-805-517-B, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $8.60
$5.85
MSRP $8.60
$5.85
14
Cowl Panel Reinforcement Audi
Audi Positions: Right
Description: Listed under Audi part number 1EA-803-490-A, this Cowl Panel Reinforcement carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
15
Cowl Panel Reinforcement Audi
Audi Positions: Left
Description: Audi part number 1EA-803-489-A, the factory Cowl Panel Reinforcement, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
16
Firewall Audi
Audi Description: The original equipment Audi Firewall supplied under part number 1EA-803-155 carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
17
Firewall Audi
Audi Description: The original equipment Audi Firewall supplied under part number 1EA-805-277 carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
18
Firewall Audi
Audi Positions: Right
Description: Genuine Audi Firewall 1EA-805-398-A. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $67.99
$54.62
MSRP $67.99
$54.62
19
Firewall Audi
Audi Positions: Left
Description: This genuine Audi Firewall, part number 1EA-805-397-A, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
20
Engine Compartment Insulation Audi
Audi Description: This genuine Audi Engine Compartment Insulation, part number 11B-863-935-B, finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $251.65
$192.51
MSRP $251.65
$192.51
21
Sound Absorber Audi
Audi Description: This genuine Audi Sound Absorber, part number 1EB-863-354-A, finishes an interior surface and hides the structure, wiring, and hardware behind it, while also carrying mounting provisions for switches, lighting, and adjacent trim pieces. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $63.32
$50.87
MSRP $63.32
$50.87