Structural Components & Rails for 2023 Audi Q4 e-tron
No.
Part # / Description / Price
Price
1
Frame Side Member 
Audi
Audi Positions: Left
Description: This genuine Audi Frame Side Member, part number 1EA-803-109, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $302.08
$231.09
MSRP $302.08
$231.09
1
Frame Side Member Audi
Audi Positions: Right
Description: Listed under Audi part number 1EA-803-110, this Frame Side Member carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $314.99
$240.96
MSRP $314.99
$240.96
2
Frame Side Member Bracket Audi
Audi Positions: Left
Description: Audi part number 1EA-803-127-A, the factory Frame Side Member Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $20.58
$14.05
MSRP $20.58
$14.05
2
Frame Side Member Bracket Audi
Audi Positions: Right
Description: Genuine Audi Frame Side Member Bracket 1EA-803-128-A. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $19.89
$13.52
MSRP $19.89
$13.52
3
Frame Side Member Bracket Audi
Audi Positions: Left
Description: This factory Audi Frame Side Member Bracket (1EA-803-773) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $30.78
$21.01
MSRP $30.78
$21.01
3
Frame Side Member Bracket Audi
Audi Positions: Right
Description: Listed under Audi part number 1EA-803-774, this Frame Side Member Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $30.78
$21.01
MSRP $30.78
$21.01
4
Fender Filler Panel Audi
Audi Positions: Left
Description: Audi part number 1EA-804-851, the factory Fender Filler Panel, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
4
Fender Filler Panel Audi
Audi Positions: Right
Description: Audi part number 1EA-804-852, the factory Fender Filler Panel, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $25.38
$17.32
MSRP $25.38
$17.32
4
Suspension Subframe Reinforcement Bracket Audi
Audi Positions: Left
Description: This factory Audi Suspension Subframe Reinforcement Bracket (1EA-802-149-A) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.62
$3.14
MSRP $4.62
$3.14
4
Suspension Subframe Reinforcement Bracket Audi
Audi Positions: Right
Description: Listed under Audi part number 1EA-802-150-A, this Suspension Subframe Reinforcement Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.62
$3.14
MSRP $4.62
$3.14
5
Fender Rail Bracket Audi
Audi Positions: Right
Description: The original equipment Audi Fender Rail Bracket supplied under part number 1EA-121-079 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $15.96
$10.85
MSRP $15.96
$10.85
6
Fender Rail Audi
Audi Positions: Left
Description: Listed under Audi part number 1EA-804-147-A, this Fender Rail forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
6
Fender Rail Audi
Audi Positions: Right
Description: This factory Audi Fender Rail (1EA-804-148-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
6
Fender Filler Panel Audi
Audi Positions: Front left rearward
Description: Listed under Audi part number 1EA-802-507-A, this Fender Filler Panel forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $55.78
$37.34
MSRP $55.78
$37.34
6
Fender Filler Panel Audi
Audi Positions: Front right rearward
Description: Listed under Audi part number 1EA-802-508-A, this Fender Filler Panel forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $56.58
$37.88
MSRP $56.58
$37.88
6
Frame Side Member Audi
Audi Positions: Rear left forward
Description: This genuine Audi Frame Side Member, part number 1EA-803-505, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
6
Frame Side Member Audi
Audi Positions: Rear right forward
Description: This factory Audi Frame Side Member (1EA-803-506) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
6
Frame Side Member Audi
Audi Positions: Rear left rearward
Description: This factory Audi Frame Side Member (1EA-803-507-A) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
6
Frame Side Member Audi
Audi Positions: Rear right rearward
Description: Audi part number 1EA-803-508-A, the factory Frame Side Member, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $194.99
$149.16
MSRP $194.99
$149.16
7
Brake Hydraulic Line Bracket Audi
Audi Positions: Left
Description: Audi part number 1EA-611-845-B, the factory Brake Hydraulic Line Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $15.55
$10.58
MSRP $15.55
$10.58
7
Brake Hydraulic Line Bracket Audi
Audi Positions: Right
Description: This factory Audi Brake Hydraulic Line Bracket (1EA-611-846-B) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $15.55
$10.58
MSRP $15.55
$10.58
8
Frame Rail End Audi
Audi Positions: Left
Description: Listed under Audi part number 1EA-804-181, this Frame Rail End carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $47.94
$32.10
MSRP $47.94
$32.10
8
Frame Rail End Audi
Audi Positions: Right
Description: The original equipment Audi Frame Rail End supplied under part number 1EA-804-182 carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $47.94
$32.10
MSRP $47.94
$32.10
9
Headlight Bracket Audi
Audi Positions: Left
Description: Lower components. The original equipment Audi Headlight Bracket supplied under part number 10A-803-713 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $59.78
$37.66
MSRP $59.78
$37.66
9
Headlight Bracket Audi
Audi Positions: Right
Description: Lower components. This genuine Audi Headlight Bracket, part number 10A-803-714, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $59.78
$40.02
MSRP $59.78
$40.02
10
Fender Rail Reinforcement Audi
Audi Positions: Left
Description: Genuine Audi Fender Rail Reinforcement 1EA-804-119-A. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
10
Fender Rail Reinforcement Audi
Audi Positions: Right
Description: This genuine Audi Fender Rail Reinforcement, part number 1EA-804-120-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $101.65
$77.15
MSRP $101.65
$77.15
10
Frame Side Member Reinforcement Audi
Audi Positions: Rear left
Description: This factory Audi Frame Side Member Reinforcement (1EA-802-491) carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
10
Frame Side Member Reinforcement Audi
Audi Positions: Rear right
Description: The original equipment Audi Frame Side Member Reinforcement supplied under part number 1EA-802-492 carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
10
Frame Side Member Bracket Audi
Audi Positions: Front left
Description: Genuine Audi Frame Side Member Bracket 1EA-803-229. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $45.22
$30.27
MSRP $45.22
$30.27
10
Frame Side Member Bracket Audi
Audi Positions: Front right
Description: Genuine Audi Frame Side Member Bracket 1EA-803-230. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $46.78
$31.32
MSRP $46.78
$31.32
10
Fender Rail Reinforcement Audi
Audi Description: The original equipment Audi Fender Rail Reinforcement supplied under part number 1EA-803-429 forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
10
Fender Rail Reinforcement Audi
Audi Description: This factory Audi Fender Rail Reinforcement (1EA-803-430) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $66.82
$53.68
MSRP $66.82
$53.68
10
Frame Side Member Reinforcement Audi
Audi Positions: Rear left forward
Description: Genuine Audi Frame Side Member Reinforcement 1EA-804-687. This original equipment component carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $44.78
$29.98
MSRP $44.78
$29.98
10
Frame Side Member Reinforcement Audi
Audi Positions: Rear right forward
Description: The original equipment Audi Frame Side Member Reinforcement supplied under part number 1EA-804-688 carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
13
Fender Rail Reinforcement Brace Audi
Audi Positions: Left
Description: Listed under Audi part number 1EA-803-211, this Fender Rail Reinforcement Brace forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $103.32
$78.42
MSRP $103.32
$78.42
13
Fender Rail Reinforcement Brace Audi
Audi Positions: Right
Description: This genuine Audi Fender Rail Reinforcement Brace, part number 1EA-803-212, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $118.33
$89.82
MSRP $118.33
$89.82
14
Fender Apron Reinforcement Audi
Audi Positions: Left
Description: This factory Audi Fender Apron Reinforcement (1EA-802-747) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $75.65
$60.78
MSRP $75.65
$60.78
14
Fender Apron Reinforcement Audi
Audi Positions: Right
Description: Listed under Audi part number 1EA-802-748, this Fender Apron Reinforcement forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $73.28
$58.88
MSRP $73.28
$58.88
14
Fender Apron Reinforcement Audi
Audi Positions: Front left
Description: This factory Audi Fender Apron Reinforcement (1EA-805-077-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $41.74
$27.94
MSRP $41.74
$27.94
15
Fender Filler Panel Audi
Audi Positions: Left
Description: This factory Audi Fender Filler Panel (1EA-803-871) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $32.58
$22.24
MSRP $32.58
$22.24
15
Fender Filler Panel Audi
Audi Positions: Right
Description: Audi part number 1EA-803-872, the factory Fender Filler Panel, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $32.18
$21.96
MSRP $32.18
$21.96
16
Frame Side Member Cross-Member Audi
Audi Positions: Left
Description: Lower components. Listed under Audi part number 1EA-803-351-E, this Frame Side Member Cross-Member carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
16
Frame Side Member Cross-Member Audi
Audi Positions: Right
Description: Lower components. Audi part number 1EA-803-352-E, the factory Frame Side Member Cross-Member, carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
18
Frame Side Member Bracket Audi
Audi Positions: Left
Description: Listed under Audi part number 1EA-804-425-E, this Frame Side Member Bracket is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $130.87
$99.33
MSRP $130.87
$99.33
18
Frame Side Member Bracket Audi
Audi Positions: Right
Description: This genuine Audi Frame Side Member Bracket, part number 1EA-804-426-E, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $144.99
$110.04
MSRP $144.99
$110.04
19
Suspension Subframe Reinforcement Bracket Audi
Audi Description: Lower components. Genuine Audi Suspension Subframe Reinforcement Bracket 1EA-805-211-B. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $159.99
$121.43
MSRP $159.99
$121.43