Bumper for 2010 Audi A3
No.
Part # / Description / Price
Price
1
Bumper Cover 
Audi
Audi Description: 2009-13, without park sensor, without park sensor. Listed under Audi part number 8P4-807-303-G-GRU, this Bumper Cover forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1,258.34
$981.50
MSRP $1,258.34
$981.50
1
Bumper Cover Audi
Audi Description: 2009-13, with park sensor. The original equipment Audi Bumper Cover supplied under part number 8P4-807-303-H-GRU forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $703.33
$548.60
MSRP $703.33
$548.60
2
Bumper Cover Bolt Audi
Audi Positions: Left
Description: 2009-13. 2006-08. Listed under Audi part number N-911-408-01, this Bumper Cover Bolt is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $11.79
$8.01
MSRP $11.79
$8.01
3
Quarter Panel Splash Shield Screw Audi
Audi Positions: Left
Description: Genuine Audi Quarter Panel Splash Shield Screw N-907-750-01. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $3.78
$2.57
MSRP $3.78
$2.57
4
Fuse And Relay Center Nut Audi
Audi Positions: Left
Description: Listed under Audi part number N-902-867-03, this Fuse And Relay Center Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $0.62
$0.42
MSRP $0.62
$0.42
5
Valance Panel Audi
Audi Description: 2009-13, without sport pkg, gas. The original equipment Audi Valance Panel supplied under part number 8P0-807-434-B-01C forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $491.66
$373.16
MSRP $491.66
$373.16
5
Valance Panel Audi
Audi Description: 2009-13, with sport pkg. This factory Audi Valance Panel (8P0-807-434-F-1RR) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $538.33
$408.60
MSRP $538.33
$408.60
6
Fender Liner Screw Audi
Audi Description: Audi part number N-910-570-01, the factory Fender Liner Screw, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.59
$2.43
MSRP $3.59
$2.43
8
Tow Eye Cap Audi
Audi Notes: PARTS: Part included with lower panel.
Description: 2009-13, without sport pkg. This factory Audi Tow Eye Cap (8P0-807-441-A-01C) is a genuine Audi accessory engineered to the vehicle's mounting points and load limits, so it fits without drilling and carries a defined capacity rating. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $32.38
$22.10
MSRP $32.38
$22.10
8
Tow Eye Cap Audi
Audi Notes: PARTS: Part included with lower panel.
Description: 2009-13, with sport pkg. This factory Audi Tow Eye Cap (8P0-807-441-B-1RR) is a genuine Audi accessory engineered to the vehicle's mounting points and load limits, so it fits without drilling and carries a defined capacity rating. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $45.98
$30.78
MSRP $45.98
$30.78
9
Bumper Trim Audi
Audi Description: 2009-13. This genuine Audi Bumper Trim, part number 8P4-807-421-A-01C, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $51.15
$41.09
MSRP $51.15
$41.09
10
Bumper Impact Bar Audi
Audi Description: 2009-13. 2006-08. This genuine Audi Bumper Impact Bar, part number 8P4-807-309-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $525.00
$398.48
MSRP $525.00
$398.48
11
Impact Bar Mount Bolt Audi
Audi Positions: Left
Description: This genuine Audi Impact Bar Mount Bolt, part number N-905-818-04, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $4.36
$2.96
MSRP $4.36
$2.96
12
Bumper Impact Absorber Audi
Audi Description: 2009-13. 2006-08. This factory Audi Bumper Impact Absorber (8P4-807-251-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $328.34
$251.18
MSRP $328.34
$251.18
13
Bumper Cover Support Rail Bracket Audi
Audi Positions: Right
Description: 2009-13. 2006-08. Audi part number 8P3-807-330, the factory Bumper Cover Support Rail Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $16.40
$11.15
MSRP $16.40
$11.15
14
Bumper Cover Support Rail Bracket Audi
Audi Positions: Left
Description: 2009-13. 2006-08. The original equipment Audi Bumper Cover Support Rail Bracket supplied under part number 8P3-807-329 is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $16.40
$11.15
MSRP $16.40
$11.15
15
Bracket Lock Nut Audi
Audi Positions: Left
Description: Listed under Audi part number N-904-369-03, this Bracket Lock Nut is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $6.66
$4.53
MSRP $6.66
$4.53
15
Bumper Cover Support Rail Nut Audi
Audi Positions: Rear
Description: This factory Audi Bumper Cover Support Rail Nut (N-105-962-01) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $3.24
$2.20
MSRP $3.24
$2.20
15
Headlight Mounting Nut Audi
Audi Description: This genuine Audi Headlight Mounting Nut, part number N-901-686-04, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $3.50
$2.38
MSRP $3.50
$2.38
16
Bumper Cover Support Rail Audi
Audi Positions: Left
Description: 2009-13. 2006-08. The original equipment Audi Bumper Cover Support Rail supplied under part number 8P4-807-377-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $58.81
$47.25
MSRP $58.81
$47.25
16
Bumper Cover Support Rail Audi
Audi Positions: Right
Description: 2009-13. 2006-08. Listed under Audi part number 8P4-807-378-B, this Bumper Cover Support Rail forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $58.81
$47.25
MSRP $58.81
$47.25
23
Bumper Guide Audi
Audi Positions: Left
Description: 2009-13. 2006-08. Listed under Audi part number 8P4-807-393-A, this Bumper Guide forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $58.81
$47.25
MSRP $58.81
$47.25
23
Bumper Guide Audi
Audi Positions: Right
Description: 2009-13. 2006-08. This genuine Audi Bumper Guide, part number 8P4-807-394-A, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $58.81
$47.25
MSRP $58.81
$47.25
25
Bumper Guide Nut Audi
Audi Positions: Left
Description: Audi part number N-106-213-01, the factory Bumper Guide Nut, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.12
$2.12
MSRP $3.12
$2.12
26
Bumper Cover Spacer Panel Audi
Audi Positions: Right
Description: 2009-13, with dual pipe outlet. The original equipment Audi Bumper Cover Spacer Panel supplied under part number 8P0-807-820-01C forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $233.34
$178.50
MSRP $233.34
$178.50
27
Bumper Cover Spacer Panel Audi
Audi Positions: Left
Description: 2009-13, without dual pipe outlet. This factory Audi Bumper Cover Spacer Panel (8P0-807-819-01C) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $233.34
$178.50
MSRP $233.34
$178.50
27
Bumper Cover Spacer Panel Audi
Audi Positions: Left
Description: 2009-13, with dual pipe outlet. This genuine Audi Bumper Cover Spacer Panel, part number 8P0-807-819-A-01C, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $216.67
$165.75
MSRP $216.67
$165.75
28
Bumper Cover Spacer Panel Audi
Audi Positions: Right
Description: 2009-13, without dual pipe outlet. This genuine Audi Bumper Cover Spacer Panel, part number 8P0-807-824-01C, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $218.33
$167.03
MSRP $218.33
$167.03
29
Bumper Cover Spacer Panel Audi
Audi Positions: Left
Description: 2009-13, without dual pipe outlet. This genuine Audi Bumper Cover Spacer Panel, part number 8P0-807-833-01C, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $233.34
$178.50
MSRP $233.34
$178.50
29
Bumper Cover Spacer Panel Audi
Audi Positions: Left
Description: 2009-13, with dual pipe outlet. Genuine Audi Bumper Cover Spacer Panel 8P0-807-833-A-01C. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $203.33
$155.55
MSRP $203.33
$155.55
30
Parking Aid Sensor Audi
Audi Description: This genuine Audi Parking Aid Sensor, part number 1S0-919-275-D, converts a physical condition into a signal the engine control module uses to set fueling and timing, so a drifting sensor degrades performance long before it triggers a hard fault. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $316.81
$242.36
MSRP $316.81
$242.36
31
Parking Aid Sensor Seal Audi
Audi Description: Listed under Audi part number 1T0-919-133-C-704, this Parking Aid Sensor Seal creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $2.58
$1.75
MSRP $2.58
$1.75
31
Parking Aid Sensor Seal Audi
Audi Description: This genuine Audi Parking Aid Sensor Seal, part number 1T0-919-133-C-9B9, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $2.35
$1.60
MSRP $2.35
$1.60
32
Parking Aid Sensor Cap Audi
Audi Description: V6 inner. 2009-13. V8. Reverse sensing system. Genuine Audi Parking Aid Sensor Cap 4B0-971-883. This original equipment component converts a physical condition into a signal the engine control module uses to set fueling and timing, so a drifting sensor degrades performance long before it triggers a hard fault. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $7.57
$5.15
MSRP $7.57
$5.15