Ride Control for 2010 Audi A3
No.
Part # / Description / Price
Price
N/A
Headlight Control Module 
Audi
Audi Description: This genuine Audi Headlight Control Module, part number 4L0-907-357-B, executes the control strategy for its subsystem, and because Audi modules are networked and component protected, a replacement is a software event as much as a hardware one. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $664.65
$504.47
MSRP $664.65
$504.47
N/A
Headlight Level Sensor Audi
Audi Description: Headlamp leveling system, without awd. A3. Headlight level control, rear, without awd, with directional beam headlamp. Headlamp range control, with directional beam headlamp, without awd. TT. Left. With sport suspension. Without Quattro. This genuine Audi ...
MSRP $341.64
$261.36
MSRP $341.64
$261.36
1
Suspension Subframe Crossmember Audi
Audi Description: A3. Without awd, Coupe. The original equipment Audi Suspension Subframe Crossmember supplied under part number 1K0-505-315-BM carries structural load and defines the mounting geometry that suspension and body panels reference, which is why dimensional accuracy matters more here than cosmetics. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $1,234.60
$1,015.15
MSRP $1,234.60
$1,015.15
2
Wheel Bearing and Hub Assembly Audi
Audi Description: Convertible, without awd. Sedan/wagon, without awd. A3. Without e-tron. 1.8l. This factory Audi Wheel Bearing and Hub Assembly (5Q0-598-611) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $345.82
$264.55
MSRP $345.82
$264.55
3
Suspension Knuckle Audi
Audi Description: Without awd. A3. Right. 30mm diameter. Audi part number 1K0-505-436-AB, the factory Suspension Knuckle, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $725.80
$550.88
MSRP $725.80
$550.88
3
Suspension Knuckle Audi
Audi Description: Without awd. A3. Left. 30mm diameter. This genuine Audi Suspension Knuckle, part number 1K0-505-435-AB, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
4
Knuckle Bushing Audi
Audi Description: A3. TT. Fwd. Awd. Genuine Audi Knuckle Bushing 1K0-505-553-A. This original equipment component controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $36.18
$24.69
MSRP $36.18
$24.69
5
Trailing Arm Audi
Audi Description: Incl.Bushings. Trailing. A3. Left. Without awd. TT. Genuine Audi Trailing Arm 1K0-505-223-K. This original equipment component controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $307.99
$235.61
MSRP $307.99
$235.61
5
Trailing Arm Audi
Audi Description: Incl.Bushings. Trailing. A3. Right. Without awd. TT. The original equipment Audi Trailing Arm supplied under part number 1K0-505-224-K controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $307.99
$235.61
MSRP $307.99
$235.61
6
Suspension Trailing Arm Bushing Audi
Audi Description: Trailing. A3. Q3. Fwd. Awd. Genuine Audi Suspension Trailing Arm Bushing 1K0-505-541-D. This original equipment component controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $22.17
$15.14
MSRP $22.17
$15.14
7
Suspension Control Arm Audi
Audi Description: Without awd. With awd, to 5/25/12. TT. A3. To 5/28/12. Incl.Bushings. This genuine Audi Suspension Control Arm, part number 1K0-505-323-N, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set ...
8
Suspension Control Arm Audi
Audi Description: TT. A3. Q3. Fwd. Awd. Audi part number 1K0-505-311-AB, the factory Suspension Control Arm, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $342.98
$262.38
MSRP $342.98
$262.38
9
Alignment Camber Adjusting Eccentric Audi
Audi Description: A3. Fwd. Awd. Camshaft. Genuine Audi Alignment Camber Adjusting Eccentric WHT-000-232. This original equipment component is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $7.32
$4.98
MSRP $7.32
$4.98
10
Suspension Trailing Arm Bracket Audi
Audi Description: Left. A3. RS3. TT RS Quattro. TTS Quattro. Without awd. Genuine Audi Suspension Trailing Arm Bracket 1K0-505-129-L. This original equipment component is a small but load bearing element of the assembly, and using the factory specification matters because ...
MSRP $153.32
$116.37
MSRP $153.32
$116.37
10
Suspension Trailing Arm Bracket Audi
Audi Description: Right. A3. Convertible, without awd. Sedan, without awd. RS3. TT RS Quattro. TTS Quattro. This factory Audi Suspension Trailing Arm Bracket (1K0-505-130-L) is a small but load bearing element of the assembly, and using the factory specification matters be ...
MSRP $151.65
$115.10
MSRP $151.65
$115.10
11
Lateral Arm Audi
Audi Description: Incl.Bushings. Without awd. TT. A3. All. Genuine Audi Lateral Arm 1K0-501-529-H. This original equipment component is a genuine Audi component built to the original equipment specification, which means it matches the factory dimensions, materials, and mounting provisions for the applications listed. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $131.64
$99.92
MSRP $131.64
$99.92
12
Shock Absorber Audi
Audi Description: A3. Without sport suspension. From 5/31/10. This genuine Audi Shock Absorber, part number 1K0-513-029-NJ, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
12
Suspension Shock Absorber Audi
Audi Description: A3. With sport suspension. With awd. Genuine Audi Suspension Shock Absorber 1K0-513-029-HQ. This original equipment component controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $356.48
$272.71
MSRP $356.48
$272.71
12
Suspension Shock Absorber Audi
Audi Description: Exc.Sport Suspension. A3. Without sport suspension. To 5/31/10. Audi part number 1K0-513-029-HM, the factory Suspension Shock Absorber, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $365.00
$279.23
MSRP $365.00
$279.23
13
Shock Absorber Bellows Audi
Audi Description: A3. Without awd, round. Audi part number 1K0-513-425-D, the factory Shock Absorber Bellows, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Confirm fitment against your vehicle identification number before ordering.
MSRP $19.20
$13.06
MSRP $19.20
$13.06
14
Jounce Bumper Audi
Audi Description: Without awd, round. A3. With sport suspension. This genuine Audi Jounce Bumper, part number 1K0-511-353-S, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Ordering genuine avoids the fit and durability compromises that come with aftermarket substitutes. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $71.67
$57.58
MSRP $71.67
$57.58
15
Shock Mount Audi
Audi Description: Without awd. A3. Audi part number 1K0-513-353-R, the factory Shock Mount, controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Confirm fitment against your vehicle identification number before ordering.
MSRP $104.98
$79.68
MSRP $104.98
$79.68
17
Coil Spring Insulator Audi
Audi Description: TT. Upper. A3. Q3. Fwd. Without awd, with ride control suspension, with ride control suspension. Listed under Audi part number 1K0-512-149-B, this Coil Spring Insulator controls wheel motion and isolates the body from road input, so its spring rate, dampi ...
MSRP $31.98
$21.83
MSRP $31.98
$21.83
17
Coil Spring Insulator Audi
Audi Description: TT. Lower. A3. Q3. Fwd. Awd. This factory Audi Coil Spring Insulator (1K0-512-297-D) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $35.98
$24.56
MSRP $35.98
$24.56
18
Suspension Stabilizer Bar Audi
Audi Description: A3. Without awd. TT. Without Quattro. The original equipment Audi Suspension Stabilizer Bar supplied under part number 1K0-511-409-BN controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
18
Suspension Stabilizer Bar Audi
Audi Description: A3. Without awd. Listed under Audi part number 1K0-511-409-CA, this Suspension Stabilizer Bar controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Every genuine Audi part is validated against the same specification as the original equipment component. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $188.26
$144.02
MSRP $188.26
$144.02
19
Suspension Stabilizer Bar Bushing Audi
Audi Description: A3. With awd, with 20.7mm stabilizer bar, with 20.7mm stabilizer bar. Without awd. This factory Audi Suspension Stabilizer Bar Bushing (1K0-511-327-AR) controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Confirm fitment against your vehicle identification number before ordering.
MSRP $21.18
$14.46
MSRP $21.18
$14.46
20
Suspension Stabilizer Bar Bracket Audi
Audi Description: A8, S8. TT. A3. Q3. Awd. Fwd. Audi part number 1K0-511-439-E, the factory Suspension Stabilizer Bar Bracket, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $50.79
$34.00
MSRP $50.79
$34.00
21
Stabilizer Link Audi
Audi Description: A3. Q3. TT. Fwd. Awd. The original equipment Audi Stabilizer Link supplied under part number 1K0-505-465-AA controls wheel motion and isolates the body from road input, so its spring rate, damping, and bushing compliance set both ride quality and the alignment geometry the tires actually see. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $77.32
$62.12
MSRP $77.32
$62.12