Gate & Hardware for 2010 Audi A3
No.
Part # / Description / Price
Price
1
Liftgate 
Audi
Audi Description: Without spoiler. This factory Audi Liftgate (8P4-827-023-J) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $1,626.66
$1,234.64
MSRP $1,626.66
$1,234.64
1
Liftgate Audi
Audi Description: With spoiler. Genuine Audi Liftgate 8P4-827-023-L. This original equipment component forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Confirm fitment against your vehicle identification number before ordering.
MSRP $1,691.32
$1,283.71
MSRP $1,691.32
$1,283.71
2
Deck Lid Drain Plug Audi
Audi Positions: Right
Description: 2017-21. 2013-2016. Suv, type 2. Sedan, bottom. Sportback. Convertible. Coupe. This factory Audi Deck Lid Drain Plug (8P4-827-951-A) forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $6.15
$4.19
MSRP $6.15
$4.19
3
Lift-Gate Stop Bumper Audi
Audi Positions: Left
Description: The original equipment Audi Lift-Gate Stop Bumper supplied under part number 8P4-827-239-B forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $14.66
$9.97
MSRP $14.66
$9.97
4
Lift-Gate Stop Bumper Audi
Audi Positions: Left
Description: Inner. Sportback. Sedan,. On lift gate. This genuine Audi Lift-Gate Stop Bumper, part number 8P4-827-249-D, forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $24.58
$16.78
MSRP $24.58
$16.78
5
Liftgate Hinge Audi
Audi Positions: Left
Description: This factory Audi Liftgate Hinge (8P4-827-299-B) manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $150.48
$114.22
MSRP $150.48
$114.22
5
Liftgate Hinge Audi
Audi Positions: Right
Description: Listed under Audi part number 8P4-827-300-B, this Liftgate Hinge manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $164.47
$124.84
MSRP $164.47
$124.84
6
Liftgate Hinge Gasket Audi
Audi Positions: Right
Description: Genuine Audi Liftgate Hinge Gasket 4A9-827-341-A. This original equipment component creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.58
$2.43
MSRP $3.58
$2.43
7
Liftgate Hinge Cover Audi
Audi Positions: Left
Description: Listed under Audi part number 8P4-827-279-B-01C, this Liftgate Hinge Cover manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Every genuine Audi part is validated against the same specification as the original equipment component. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $11.88
$8.08
MSRP $11.88
$8.08
8
Liftgate Lift Support 2 Audi
Audi Positions: Left
Description: A3. Listed under Audi part number 8P4-827-552-C, this Liftgate Lift Support forms part of the vehicle's visible exterior surface, so panel gap, contour, and mounting point alignment are as important to the finished repair as the part itself. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $105.01
$79.70
MSRP $105.01
$79.70
9
Deck Lid Lift Support Stud Audi
Audi Positions: Right
Notes: PARTS: Part included with strut.
Description: Support strut,clamp. Strut,retainer clip. Support cylinder,clamp. Convertible. With TT rs. The original equipment Audi Deck Lid Lift Support Stud supplied under part number 443-823-397 is a small but load bearing element of the assembly, and using the fac ...
MSRP $6.54
$4.45
MSRP $6.54
$4.45
10
Lift-Gate Support Strut Holder Audi
Audi Positions: Right
Description: Support strut,ball stud. Lower. S6. This factory Audi Lift-Gate Support Strut Holder (WHT-006-580) is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $19.15
$13.03
MSRP $19.15
$13.03
11
Liftgate Support Strut Holder Audi
Audi Positions: Right
Description: Upper. Audi part number 8P4-827-439-B, the factory Liftgate Support Strut Holder, is a small but load bearing element of the assembly, and using the factory specification matters because thread pitch, coating, and clamp load are engineered for the joint rather than generic. Every genuine Audi part is validated against the same specification as the original equipment component. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $3.48
$2.37
MSRP $3.48
$2.37
14
End Cover Audi
Audi Positions: Right
Description: This genuine Audi End Cover, part number 8P4-827-686-A-01C, encloses and protects the component behind it, keeping debris, moisture, and heat away from hardware that was not designed to be exposed while also finishing the visible surface. Every genuine Audi part is validated against the same specification as the original equipment component. Confirm fitment against your vehicle identification number before ordering.
MSRP $39.98
$27.29
MSRP $39.98
$27.29
14
End Cover Audi
Audi Positions: Left
Description: Audi part number 8P4-827-685-A-01C, the factory End Cover, encloses and protects the component behind it, keeping debris, moisture, and heat away from hardware that was not designed to be exposed while also finishing the visible surface. Genuine Audi tooling and materials mean it installs into the original mounting points without modification. Confirm fitment against your vehicle identification number before ordering.
MSRP $39.98
$27.29
MSRP $39.98
$27.29
15
Hatch Seal Audi
Audi Description: This genuine Audi Hatch Seal, part number 8P4-827-705-E, creates the sealing interface between two components, and because a seal is the cheapest part in most assemblies but the most common source of leaks, using the correct specification is what keeps the repair permanent. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $298.33
$228.23
MSRP $298.33
$228.23
16
License Plate Light Panel Audi
Audi Description: Audi part number 8E0-827-113-C-1P9, the factory License Plate Light Panel, provides illumination or signaling, and because lens clarity, beam pattern, and moisture sealing determine both effectiveness and legal compliance, correct fitment matters more here than on most exterior parts. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
17
Trunk Lock Actuator Motor Audi
Audi Description: The original equipment Audi Trunk Lock Actuator Motor supplied under part number 8R0-827-505-A conditions and distributes cabin air, where refrigerant charge, airflow path integrity, and actuator calibration together determine whether the system reaches its target temperature. It is supplied through the Audi dealer parts network and matches the component installed at the factory. Fitment varies by model year, trim, and option content, so verify before ordering.
MSRP $181.66
$138.98
MSRP $181.66
$138.98
18
Liftgate Latch Cover Audi
Audi Description: Genuine Audi Liftgate Latch Cover 8P4-827-520-B. This original equipment component manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. Buying genuine keeps the vehicle's original fit, finish, and warranty coverage intact. Use the fitment guide or contact our parts team to confirm the correct application.
MSRP $22.58
$15.41
MSRP $22.58
$15.41
20
Liftgate Lock Striker Plate Audi
Audi Description: A3. Q3. Without power lift gate. Audi part number 8P4-827-507-A, the factory Liftgate Lock Striker Plate, manages door operation and security, where mechanism wear, actuator health, and correct adjustment determine whether the door opens, latches, and seals the way it did new. As a genuine Audi part it carries factory part numbering, original fitment data, and Audi parts warranty coverage. Check the applications list or supply your VIN to confirm this part fits your vehicle.
MSRP $89.32
$67.79
MSRP $89.32
$67.79
2 This part contains hazardous materials. Extra shipping costs apply.